Asrock K8Upgrade-PCIE Motherboards > Downloads Drivers, Manual and BIOS

Company

Asrock

Categories

Motherboards

Serie

Asrock AMD Serie

Model

Asrock K8Upgrade-PCIE

Description

Bios

Operating System

MS-DOS

Version

1.20

Size Driver

454KB

File Name

k8upgrade-pcie(1.20).zip

Observations

ASRock BIOS Upgrade Instruction

1. Cool 'n' Quiet table updated.
2. Supported new CPU with upgrade CPU card:
K8 939 Athlon64 Rev.E6 3400+/3800+
K8 939 Athlon 64X2 Rev.E4 3800+
K8 939 Athlon 64X2 Rev.E6 3800+/4200+/4600+
BIOS Update Utility

AFUDOS.EXE: The Flash Memory Writer utility is included in the WinZip format of BIOS file. It updates the BIOS by uploading a new BIOS file to the programmable flash ROM chip on the motherboard. To determine the BIOS version of your motherboard, press "F2" to enter the BIOS setup utility during bootup, and check the BIOS version from the Main menu. Larger numbers represent a newer BIOS file. This utility works only in DOS mode. (How do I check the BIOS version?)
The Flash Memory Writer utility can not be suitable for all ASRock motherboards. Please use the Flash utility which is included in each BIOS file to update its BIOS. Also ASRock motherboard MUST use ASRock's Flash utility to update BIOS, those uncertified BIOS flashing tools will cause motherboard damage.

Updating BIOS Procedures

Create a bootable system floppy disk.
Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save both AFUDOS.EXE utility and BIOS file to the disk you created in step 1.
Boot from the disk you created in step 2.
At the "A:\" prompt, type AFUDOS, hit space bar once, and type BIOS file name then press "Enter". For example: A:\AFUDOS ANF7R301 "Enter" then you will see a message "Please wait for BIOS loading ROM".
After 30 seconds, you will see the message "Program ended normally", then you have finished upgrading the BIOS.
After finishing upgrading the BIOS, please remove the floppy disk. Restart your system and press "F2" to enter the BIOS setup utility during boot up.
In Exit menu, please select "Load Default Settings" and press "Enter" to continue.
Select "Exit Saving Changes" and press "Enter" to exit the BIOS setup utility.
Now, system is booting up with new BIOS.

How do I check the BIOS version?

1.The BIOS version can be found during system boot up.
2.The BIOS version can be found in BIOS setup utility.

Notice

If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.

Company

Asrock

Categories

Motherboards

Serie

Asrock AMD Serie

Model

Asrock K8Upgrade-PCIE

Description

Bios Cool 'n' Quiet table updated.

Operating System

MS-DOS

Version

1.10

Size Driver

454KB

File Name

k8upgrade-pcie(1.10).zip

Observations

ASRock BIOS Upgrade Instruction

BIOS Update Utility

AFUDOS.EXE: The Flash Memory Writer utility is included in the WinZip format of BIOS file. It updates the BIOS by uploading a new BIOS file to the programmable flash ROM chip on the motherboard. To determine the BIOS version of your motherboard, press "F2" to enter the BIOS setup utility during bootup, and check the BIOS version from the Main menu. Larger numbers represent a newer BIOS file. This utility works only in DOS mode. (How do I check the BIOS version?)
The Flash Memory Writer utility can not be suitable for all ASRock motherboards. Please use the Flash utility which is included in each BIOS file to update its BIOS. Also ASRock motherboard MUST use ASRock's Flash utility to update BIOS, those uncertified BIOS flashing tools will cause motherboard damage.

Updating BIOS Procedures

Create a bootable system floppy disk.
Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save both AFUDOS.EXE utility and BIOS file to the disk you created in step 1.
Boot from the disk you created in step 2.
At the "A:\" prompt, type AFUDOS, hit space bar once, and type BIOS file name then press "Enter". For example: A:\AFUDOS ANF7R301 "Enter" then you will see a message "Please wait for BIOS loading ROM".
After 30 seconds, you will see the message "Program ended normally", then you have finished upgrading the BIOS.
After finishing upgrading the BIOS, please remove the floppy disk. Restart your system and press "F2" to enter the BIOS setup utility during boot up.
In Exit menu, please select "Load Default Settings" and press "Enter" to continue.
Select "Exit Saving Changes" and press "Enter" to exit the BIOS setup utility.
Now, system is booting up with new BIOS.

How do I check the BIOS version?

1.The BIOS version can be found during system boot up.
2.The BIOS version can be found in BIOS setup utility.

Notice

If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.

Company

Asrock

Categories

Motherboards

Serie

Asrock AMD Serie

Model

Asrock K8Upgrade-PCIE

Description

Bios First released.

Operating System

MS-DOS

Version

1.00

Size Driver

454KB

File Name

k8upgrade-pcie(1.00).zip

Observations

Company

Asrock

Categories

Motherboards

Serie

Asrock AMD Serie

Model

Asrock K8Upgrade-PCIE

Description

SiS USB 2.0 driver

Operating System

Windows 98-Me

Version

Size Driver

115KB

File Name

usb_me_98(02).zip

Observations

The USB 2.0 drivers support for Microsoft Windows XP
USB 2.0 drivers are provided in Service Pack 1 (SP1) for Windows XP,
which is available through Windows Update http://windowsupdate.microsoft.com/ .

The USB 2.0 drivers support for Microsoft Windows 2K
USB 2.0 drivers are provided in Service Pack 4 (SP4) for Windows 2K,
which is available through Windows Update http://windowsupdate.microsoft.com/ .

Company

Asrock

Categories

Motherboards

Serie

Asrock AMD Serie

Model

Asrock K8Upgrade-PCIE

Description

SiS IDE driver

Operating System

Windows 98-Me-2000-XP

Version

2.04a

Size Driver

5.3MB

File Name

ide_xp_2k_me_98(2.04a).zip

Observations

Mini IDE Package V2.04a Setup Utility update/Modification/Bug Fixed
1. Remove the setup control for SiS180 IDE/RAID controller and SiS Mini IDE driver
support SiS5513 IDE controller only.
SiS961/962/963 5513 IDE Controller [Package V2.04a]
1. Windows XP driver certified by WHQL as for logo driver.
2. Submission ID for Windows XP driver is 728265.
3. Driver Version/Modification/Bug Fixed
[Windows 2000 driver v2.03]
Filename Driver Version
siside.sys 2.03.02.0
- Retain SiS Mini IDE driver v2.03.
[Windows XP driver v2.04a]
Filename Driver Version
siside.sys 5.1.1039.2041
- Remove SiS Mini IDE driver support for SiS180 IDE/RAID controller.

Company

Asrock

Categories

Motherboards

Serie

Asrock AMD Serie

Model

Asrock K8Upgrade-PCIE

Description

Realtek AC'97 audio driver

Operating System

Windows XP 64 bits

Version

A3.72

Size Driver

11.2MB

File Name

realtek_xp64(a3.72).zip

Observations

Driver & Application Installation/Removal Procedure For Realtek AC'97 Codec:
=================================================================================

<<< For Win2000/WinME/WinXP (WDM driver)/Win98 Gold(First Edition)/Win98SE >>>

---------------------------------------
Setup Driver/Application at first time:
---------------------------------------

Step 1. Before installing the Realtek AC'97 Drivers & Applications, Press the
[Cancel] button if Windows detect the PCI Multimedia Audio device.

Step 2. Insert the "Realtek AC'97 Drivers & Applications" CD into the CD-ROM
drive and run the setup.exe program to finish the installation.

Step 3. Click on [Next/OK/Go] to continue the procedure. If the Windows popup
"Digital Signature Not Found" message, press [Yes] to continue the
installation.

Step 4. Finally, select to restart the system and press [Finish] to complete
the installation.

The system will reload the drivers and do some adjustments in the INF
file if so required.

----------------
Setup for Manual
----------------
1. Double-click the "System" icon to open the "System Properties" dialog from Control Panel .
2. Choose "Hardware" tab and click the "Device Manager" button .
3. Please right-click mouse on "MultiMedia Audio Controller" and choose the "Properties" menu item
to show the driver details.
4. Click the "Driver" tab and then click the "Update Driver..." button for update.
5. Please follow the instructions of the "Upgrade Device Driver Wizard".
6. Choose "Search for a suitable driver for my device" and click the "Next" button.
7. Please specify the driver location/source and then click the "Next" button in this case,
"Specify a location" has been chosen.
8. If "Specify driver location" is chosen, the Wizard will ask for the path where the driver is located.
9. Click the "Next" button to install Audio Driver on "Driver Files Search Results".
10. If the "Digital Signature Not Found" dialog is opened, click the "Yes" button to continue
the Installation.
11. After completing the above steps, the drier has been installed into the system.
Please click "Finish" button to complete the installation.

--------------------------
Update Driver/Application:
--------------------------

Step 1. Follow Step 2,3,4 described in [Setup at first time] above to complete
the procedure.

Access to Official Website Asrock

Home English Home Spanish Home French Home German Drivers English Drivers Spanish Drivers French Drivers German

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 15 files for Asrock K8Upgrade-PCIE

Select Files