Asrock K7VM2 R3.0 Motherboards > Downloads Drivers, Manual and BIOS

Company

Asrock

Categories

Motherboards

Serie

Asrock AMD Serie

Model

Asrock K7VM2 R3.0

Description

Bios 8. Open "AGP Fast Write" option in Advanced Chipset Configuration. The default value is "Disabled". 9. Creative sound card should be working in legacy mode. 10. Changed Boot Menu key to . 11. Support K7VM2 R 3.0 hardware reversion.

Operating System

MS-DOS

Version

1.80

Size Driver

337KB

File Name

k7vm2(r3)(1.80).zip

Observations

ASRock BIOS Upgrade Instruction

BIOS Update Utility

AFUDOS.EXE: The Flash Memory Writer utility is included in the WinZip format of BIOS file. It updates the BIOS by uploading a new BIOS file to the programmable flash ROM chip on the motherboard. To determine the BIOS version of your motherboard, press "F2" to enter the BIOS setup utility during bootup, and check the BIOS version from the Main menu. Larger numbers represent a newer BIOS file. This utility works only in DOS mode. (How do I check the BIOS version?)
The Flash Memory Writer utility can not be suitable for all ASRock motherboards. Please use the Flash utility which is included in each BIOS file to update its BIOS. Also ASRock motherboard MUST use ASRock's Flash utility to update BIOS, those uncertified BIOS flashing tools will cause motherboard damage.

Updating BIOS Procedures

Create a bootable system floppy disk.
Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save both AFUDOS.EXE utility and BIOS file to the disk you created in step 1.
Boot from the disk you created in step 2.
At the "A:\" prompt, type AFUDOS, hit space bar once, and type BIOS file name then press "Enter". For example: A:\AFUDOS ANF7R301 "Enter" then you will see a message "Please wait for BIOS loading ROM".
After 30 seconds, you will see the message "Program ended normally", then you have finished upgrading the BIOS.
After finishing upgrading the BIOS, please remove the floppy disk. Restart your system and press "F2" to enter the BIOS setup utility during boot up.
In Exit menu, please select "Load Default Settings" and press "Enter" to continue.
Select "Exit Saving Changes" and press "Enter" to exit the BIOS setup utility.
Now, system is booting up with new BIOS.

How do I check the BIOS version?

1.The BIOS version can be found during system boot up.
2.The BIOS version can be found in BIOS setup utility.

Notice

If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.

Company

Asrock

Categories

Motherboards

Serie

Asrock AMD Serie

Model

Asrock K7VM2 R3.0

Description

Bios

Operating System

MS-DOS

Version

1.90

Size Driver

338KB

File Name

k7vm2(r3)(1.90).zip

Observations

ASRock BIOS Upgrade Instruction

1. Update KM266 VGA BIOS to version 78.60.00.11.
2. Bootable USB device can be detected after hardware reset from OS.
BIOS Update Utility

AFUDOS.EXE: The Flash Memory Writer utility is included in the WinZip format of BIOS file. It updates the BIOS by uploading a new BIOS file to the programmable flash ROM chip on the motherboard. To determine the BIOS version of your motherboard, press "F2" to enter the BIOS setup utility during bootup, and check the BIOS version from the Main menu. Larger numbers represent a newer BIOS file. This utility works only in DOS mode. (How do I check the BIOS version?)
The Flash Memory Writer utility can not be suitable for all ASRock motherboards. Please use the Flash utility which is included in each BIOS file to update its BIOS. Also ASRock motherboard MUST use ASRock's Flash utility to update BIOS, those uncertified BIOS flashing tools will cause motherboard damage.

Updating BIOS Procedures

Create a bootable system floppy disk.
Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save both AFUDOS.EXE utility and BIOS file to the disk you created in step 1.
Boot from the disk you created in step 2.
At the "A:\" prompt, type AFUDOS, hit space bar once, and type BIOS file name then press "Enter". For example: A:\AFUDOS ANF7R301 "Enter" then you will see a message "Please wait for BIOS loading ROM".
After 30 seconds, you will see the message "Program ended normally", then you have finished upgrading the BIOS.
After finishing upgrading the BIOS, please remove the floppy disk. Restart your system and press "F2" to enter the BIOS setup utility during boot up.
In Exit menu, please select "Load Default Settings" and press "Enter" to continue.
Select "Exit Saving Changes" and press "Enter" to exit the BIOS setup utility.
Now, system is booting up with new BIOS.

How do I check the BIOS version?

1.The BIOS version can be found during system boot up.
2.The BIOS version can be found in BIOS setup utility.

Notice

If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.

Company

Asrock

Categories

Motherboards

Serie

Asrock AMD Serie

Model

Asrock K7VM2 R3.0

Description

VGA driver

Operating System

Windows 2000-XP

Version

1.01.02

Size Driver

4.6MB

File Name

vga_xp_2k_km266(1.01.02).zip

Observations

How to Update the S3 Graphics Display Driver in Windows XP
===========================================================
To update or change the display driver:

1. Open the Properties for your S3 Graphics Adapter in Device Manager.

To open the Properties dialog:
Click Start, and then click Control Panel. Click Appearance and Themes, and then click Display.
Click the Settings tab, click Advanced, and then click the Adapter tab and click Properties.
2. Click the Driver tab, and then click Update driver.
3. After the Hardware Update Wizard starts, click "Install from a list or specific location"
and then click Next.
4. Select the locations you wish to search for the updated driver files.

If the updated S3 Graphics driver that you want to install is located in a folder
on the hard disk, then check "Include this location in the search" and click Browse
to select that folder.

Note: If the updated driver is not located on a CD or floppy disk, then
uncheck the "Search removable media" box to speed the search process.
5. Click Next to begin the search.
6. The Hardware Update wizard will search the selected locations for the updated display driver.
If Windows XP finds a driver that it determines to be the best match for your hardware
and is better than the currently installed driver, the installation will begin.

Note: If you are installing a driver that has not yet passed Windows Logo
testing for compatibility with Windows XP, a warning message will appear.
If you wish to continue with the driver installation, click Continue Anyway.

A System Restore point will be automatically created by Windows XP before
installing any unsigned driver files. (See Windows XP Help for more on System Restore.)
7. Once all the driver files have been copied, click Finish.

You will then be prompted to restart your computer to complete the driver installation.

Company

Asrock

Categories

Motherboards

Serie

Asrock AMD Serie

Model

Asrock K7VM2 R3.0

Description

Lan driver

Operating System

Windows 98-Me-2000-XP

Version

3.5

Size Driver

3.6MB

File Name

lan_xp_2k_me_98(3.5).zip

Observations

User guide for utilities

Please refer to the text files (*.TXT) in each utility subdirectory.
For example, for diagnostic utility user guide, please check
\DIAG.TXT.
Notice that flash utility is only used for Add-On-Card BootROM flash
purpose. For LAN-On-Motherboard BootROM usage, LAN BootROM should be
integrated into BIOS and than flash the BIOS (with LAN BootROM image)
using flash utility provided by motherboard vendors.
User guide for drivers

Please refer to the text files (*.TXT) in each driver subdirectory.
For example, if you are installing Windows platform drivers, please
read the text file in \WIN.TXT for installation information.
Notice that the BootROM image for both Add-On-Card and LAN-On-Motherboard
are contained in this software package. Please see the text files (*.TXT)
included in the BootROM folders for detail.
User Guide for Unattended Mode Installation

Please refer to the text files (*.TXT) in \UNATTEND\ subdirectory.
You could find the sample file in each subdirectory as well.

Access to Official Website Asrock

Home English Home Spanish Home French Home German Drivers English Drivers Spanish Drivers French Drivers German

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 13 files for Asrock K7VM2 R3.0

Select Files