Available 3 files for Micronet SP132K
Select Files
Company
Micronet
Categories
Fax & Modem & ISDN
Model
Micronet SP132K
Description
Drivers
Operating System
Windows 2000
Size Driver
29KB
File Name
sp132k_win2k.zip
Observations
[Version]
signature = "$Windows NT$"
;ClassGUID = {4d36e96d-e325-11ce-bfc1-08002be10318}
Class=Modem
Provider=%Mfabc%
[Manufacturer]
%Mfabc%=Mfabc
[Mfabc]
%MfabcA% = Modem1, MF\LMNDIS_DEV0
[Modem1]
AddReg=All, MfgAddReg, Modem1.AddReg, PCMCIA
[All]
HKR,,FriendlyDriver,,Unimodem.vxd
HKR,,DevLoader,,*VCOMM
HKR,,ConfigDialog,,modemui.dll
HKR,,PortSubClass,1,02
HKR,,EnumPropPages,,"modemui.dll,EnumPropPages"
HKR, Init, 1,, "AT
HKR, Responses, "
HKR, Responses, "
[EXTERNAL]
HKR,, DeviceType, 1, 01
[INTERNAL]
HKR,, DeviceType, 1, 02
[PCMCIA]
HKR,,PortDriver,,Serial.vxd
HKR,,Contention,,*vcd
HKR,, DeviceType, 1, 03
[MfgAddReg]
HKR,, InactivityScale, 1, 01,00,00,00
HKR, Init, 2,, "AT &F
HKR, Init, 3,, "AT E0 V1 W0
HKR, Monitor, 1,, "ATS0=0
HKR, Monitor, 2,, "None"
HKR, Hangup, 1,, "ATH
HKR, Answer, 1,, "ATA
HKR,, Reset,, "AT&F
HKR, Settings, Prefix,, "AT"
HKR, Settings, Terminator,, "
HKR, Settings, DialPrefix,, "D"
HKR, Settings, SpeakerVolume_Low,, "L0"
HKR, Settings, SpeakerVolume_Med,, "L2"
HKR, Settings, SpeakerVolume_High,, "L3"
HKR, Settings, SpeakerMode_Off,, "M0"
HKR, Settings, SpeakerMode_Dial,, "M1"
HKR, Settings, SpeakerMode_On,, "M2"
HKR, Settings, SpeakerMode_Setup,, "M3"
HKR, Settings, FlowControl_Off,, "&K0"
HKR, Settings, FlowControl_Hard,, "&K3"
HKR, Settings, FlowControl_Soft,, "&K4"
HKR, Settings, ErrorControl_On,, "\N3"
HKR, Settings, ErrorControl_Off,, "\N0"
HKR, Settings, ErrorControl_Forced,, "\N4"
HKR, Settings, ErrorControl_Cellular,,
HKR, Settings, ErrorControl_Cellular_Forced,,
;k9/13 HKR, Settings, Compression_On,, """H3%%C1"
;k9/13 HKR, Settings, Compression_Off,, """H0%%C0"
HKR, Settings, Compression_On,, "%%C1"
HKR, Settings, Compression_Off,, "%%C0"
HKR, Settings, Modulation_CCITT,, "B0 "
HKR, Settings, Modulation_Bell,, "B1 "
HKR, Settings, SpeedNegotiation_Off,, "N0"
HKR, Settings, SpeedNegotiation_On,, "N1"
HKR, Settings, Pulse,, "P"
HKR, Settings, Tone,, "T"
HKR, Settings, Blind_Off,, "X4"
Company
Micronet
Categories
Fax & Modem & ISDN
Model
Micronet SP132K
Description
Drivers
Operating System
Windows 3.11-95-NT
Size Driver
446KB
File Name
sp132k.zip
Observations
This document contains information that supplements the "User's Manual"
and accompanying software. The User's Manual can be found in the root of the
driver disk as MANUAL.TXT.
Contents
ÄÄÄÄÄÄÄÄ
Introduction
PCMCIA Driver Installation
Getting Started
EMM386 Usage with LanModem
Driver Directory Structure
Support Options
Copyrights, Trademarks, and Disclaimers
Introduction
ÄÄÄÄÄÄÄÄÄÄÄÄ
Thank you for purchasing the PCMCIA Ethernet/Fax/Modem PC Card.
This diskette has network driver support for the PCMCIA
Ethernet/Fax/Modem PC Card. There is a format change for this driver
disk. All README's have been reformatted, an easy setup program,
and consistency on all documentation provided.
We hope our new readme's and installation will minimize the users
effort to make our products work. Should you have further
recommendations please contact the support manager.
Install PC Card Software Manually
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
The installation software has been carefully designed to detect
a combination of hardware and software installed on the PC. Proper
detection will allow the PC's PC Card drivers to enable the
LanModem. If the installation software fails to complete,
the enabler will need to be manually copied from the driver disk
to the PC. The follow the next few steps for instructions
If Windows for Workgroup 3.11, Windows NT, Windows 95, or Windows 98
are used, follow the instructions for installing PC Cards in the
PC's manual.
Determine if any third party generic enablers installed on the PC.
These are identified by a search through the CONFIG.SYS file for
the following lines:
Vendor Device Loaded in CONFIG.SYS
--------------- -------------------------------
Awards Software DEVICE=C:\CARDWARE\PCENABLE.EXE
System Soft DEVICE=C:\CARDSOFT\CARDID.EXE
Phoenix DEVICE=C:\PCMPLUS\PCMSCD.EXE
If one of these exist in your CONFIG.SYS, it can be used to enable
the PCMCIA Ethernet/Fax/Modem PC Card. Follow the PCMCIA driver
installation instructions in the PC's manual.
If the PC Card drivers do not support multi-function cards, please
use the included enabler.
Disable all current PC Card drivers by editing the CONFIG.SYS
and AUTOEXEC.BAT. If it is necessary to keep these drivers
for other adapters skip to next section.
Insert Driver Disk in drive A:.
Type C: at the command prompt.
Type MD LMCARD to make a new directory.
Type COPY A:\ENABLER\*.* C:\LMCARD to copy the enabler to
your directory.
Company
Micronet
Categories
Fax & Modem & ISDN
Model
Micronet SP132K
Description
Drivers
Operating System
Windows XP
Size Driver
292KB
File Name
sp132k_xp.zip
Observations
This document contains information that supplements the "User's Manual"
and accompanying software. The User's Manual can be found in the root of the
driver disk as MANUAL.TXT.
Contents
ÄÄÄÄÄÄÄÄ
Introduction
PCMCIA Driver Installation
Getting Started
EMM386 Usage with LanModem
Driver Directory Structure
Support Options
Copyrights, Trademarks, and Disclaimers
Introduction
ÄÄÄÄÄÄÄÄÄÄÄÄ
Thank you for purchasing the PCMCIA Ethernet/Fax/Modem PC Card.
This diskette has network driver support for the PCMCIA
Ethernet/Fax/Modem PC Card. There is a format change for this driver
disk. All README's have been reformatted, an easy setup program,
and consistency on all documentation provided.
We hope our new readme's and installation will minimize the users
effort to make our products work. Should you have further
recommendations please contact the support manager.
Install PC Card Software Manually
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
The installation software has been carefully designed to detect
a combination of hardware and software installed on the PC. Proper
detection will allow the PC's PC Card drivers to enable the
LanModem. If the installation software fails to complete,
the enabler will need to be manually copied from the driver disk
to the PC. The follow the next few steps for instructions
If Windows for Workgroup 3.11, Windows NT, Windows 95, or Windows 98
are used, follow the instructions for installing PC Cards in the
PC's manual.
Determine if any third party generic enablers installed on the PC.
These are identified by a search through the CONFIG.SYS file for
the following lines:
Vendor Device Loaded in CONFIG.SYS
--------------- -------------------------------
Awards Software DEVICE=C:\CARDWARE\PCENABLE.EXE
System Soft DEVICE=C:\CARDSOFT\CARDID.EXE
Phoenix DEVICE=C:\PCMPLUS\PCMSCD.EXE
If one of these exist in your CONFIG.SYS, it can be used to enable
the PCMCIA Ethernet/Fax/Modem PC Card. Follow the PCMCIA driver
installation instructions in the PC's manual.
If the PC Card drivers do not support multi-function cards, please
use the included enabler.
Disable all current PC Card drivers by editing the CONFIG.SYS
and AUTOEXEC.BAT. If it is necessary to keep these drivers
for other adapters skip to next section.
Insert Driver Disk in drive A:.
Type C: at the command prompt.
Type MD LMCARD to make a new directory.
Type COPY A:\ENABLER\*.* C:\LMCARD to copy the enabler to
your directory.
Modify the PATH= statement in your AUTOEXEC.BAT to include
path C:\LMCARD.
Change From PATH=
To PATH=
Use the CARDEN.EXE to enable LanModem when the PC is loading
Card Services.
Access to Official Website Micronet
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.