Available 1 files for Lucent MDP7800V-U

Company

Lucent

Categories

Fax & Modem & ISDN

Model

Lucent MDP7800V-U

Description

Drivers

Operating System

Windows 95-98-98 Se-NT

Size Driver

1013KB

File Name

mp78_539.exe

Observations

MDP7800-U / MDP7800V-U / MDP7800SP-U PCI Modem
==============================================

Section A: Important notice

Section B: Installation of PCI modem drivers on Windows 95
OSR1 platform

Section C: Installation of PCI modem drivers on Windows 95
OSR2 platform

Section D: Installation of PCI modem drivers on Windows 98
platform

Section E: Installation of PCI modem drivers on Windows NT
platform

Section F: Installation of Trio DataFax Voice and other
applications

Section G: How to install Microsoft Fax in Windows 98

Section H: How to change the buzzer volume for Dial-Up
Networking, Phone Dialer and Hyperterminal

Section I: How to change the modem Country Profile

Section J: Technical Support

-------------------------------------------------------------------------------------------------
Section A:

Important notice
================

1. The PCI modem can be set up on Windows 95 OSR1,
Windows 95 OSR2, Windows 98 or Windows NT but no
support on WIN3.x platform.

2. For MDP7800-U, speaker phone is not supported but it
can be used as answering machine.

3. For MDP7800-U modem, though the 'Dialer...' button for
speakerphone function in Trio DataFax Voice is enabled.
However, it is not supported by this modem.

4. For information how to use the AT command set, please
refer to file Atcomset.doc in the root directory of the
installation CD. You can also find it under Windows
directory of your hard drive after installation of modem
drivers.
-------------------------------------------------------------------------------------------------
Section B:

Installation of PCI modem drivers on Windows 95 OSR1 platform
==============================================================

1. Win95 will automatically detect the PCI PnP Modem and
displays the 'New Hardware Found' dialog box.

2. Insert the installation CD provided into the CD-ROM drive.

3. Select the 'Driver from disk provided by Hardware
manufacturer' option and click 'OK'.

4. Type D:\Win9x\ in the combo box and click 'OK'.