Available 4 files for Lamaqq USB Modem Typ RELAQQS Voice-Data-Fax

 

Select Files

Company

Lamaqq

Categories

Fax & Modem & ISDN

Model

Lamaqq USB Modem Typ RELAQQS Voice-Data-Fax

Description

Drivers

Operating System

Windows 2000

Size Driver

1.8MB

File Name

usb2kv.zip

Observations

Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country selection
6) Known issues
7) Troubleshooting
--------------
1. Quick Start
--------------

Important notes:

1) This version of RELAQQS USB was tested only with Microsoft Windows 2000
Professional.

2) If RELAQQS USB is already installed in your system and you want to re-install
new version, first uninstall RELAQQS USB (See Uninstall Procedure), and only
then proceed to install new version.
To install RELAQQS USB for the first time:
-------------------------------------------
a) Plug in the RELAQQS USB modem into a USB port.
b) Windows will instantly detect the USB modem will start software installation.
c) When requested, point to the RELAQQS USB install diskette in the floppy drive or
CD-ROM drive.
d) RELAQQS USB drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------

To verify that RELAQQS USB is installed correctly, follow these steps:

a) In Control Panel - Modems: check for the presence of your USB modem.
To Check that RELAQQS USB is working properly:

a) Create a configuration (Direct to port or modem) of Hyper Terminal.

b) Run Hyper Terminal.
Type ATI1, ATI2 or ATI3 and make sure you receive the modem IDs.
Dial any accessible phone number, and see that that phone rings.
Dial to another modem (ATDTxxx or via the dial button of the TAPI
interface) and see that a modem session is established.

If you have successfully connected, then RELAQQS USB has been successfully
installed.
----------------------
3. Uninstall Procedure
----------------------
a) Go to Control Panel / Add/Remove Programs
b) Select "Uninstall RELAQQS USB Modem"
c) Click on Add/Remove Button
d) A confirmation window appears. Click "OK" to proceed.
e) RELAQQS USB drivers will be uninstalled.
f) Restart you PC.

NOTE: Un-plugging the modem from the port is not enough to ensure
proper removal of drivers. You must restart your PC, in order to
prevent damage to your system!

Company

Lamaqq

Categories

Fax & Modem & ISDN

Model

Lamaqq USB Modem Typ RELAQQS Voice-Data-Fax

Description

Drivers

Operating System

Windows 95-98-98Se

Size Driver

1.6MB

File Name

usb98v.zip

Observations

Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country selection
6) Known issues
7) Troubleshooting
--------------
1. Quick Start
--------------

Important notes:

1) This version of RELAQQS USB is compatible only with Microsoft Windows 98.

2) If RELAQQS USB is already installed in your system and you want to re-install
new version, first uninstall RELAQQS USB (See Uninstall Procedure), and only
then proceed to install new version.
To install RELAQQS USB for the first time:
-------------------------------------------
a) Plug in the RELAQQS USB modem into a USB port.
b) Windows98 will instantly detect the USB modem will start software installation.
c) When requested, point to the RELAQQS USB install diskette in the floppy drive or
CD-ROM drive.
d) RELAQQS USB drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------

To verify that RELAQQS USB is installed correctly, follow these steps:

a) In Control Panel - Modems: check for the presence of your USB modem.
To Check that RELAQQS USB is working properly:

a) Create a configuration (Direct to port or modem) of Hyper Terminal.

b) Run Hyper Terminal.
Type ATI1, ATI2 or ATI3 and make sure you receive the modem IDs.
Dial any accessible phone number, and see that that phone rings.
Dial to another modem (ATDTxxx or via the dial button of the TAPI
interface) and see that a modem session is established.

If you have successfully connected, then RELAQQS USB has been successfully
installed.
----------------------
3. Uninstall Procedure
----------------------
a) Go to Control Panel / Add/Remove Programs
b) Select "Uninstall RELAQQS USB Modem"
c) Click on Add/Remove Button
d) A confirmation window appears. Click "OK" to proceed.
e) RELAQQS USB drivers will be uninstalled.
f) You may un-plug the RELAQQS USB from the USB port.

Company

Lamaqq

Categories

Fax & Modem & ISDN

Model

Lamaqq USB Modem Typ RELAQQS Voice-Data-Fax

Description

Drivers

Operating System

Windows Me

Size Driver

1.8MB

File Name

usbmev.zip

Observations

Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country selection
6) Known issues
7) Troubleshooting
--------------
1. Quick Start
--------------

Important notes:

1) This version of RELAQQS USB is compatible only with Microsoft Windows ME.

2) If RELAQQS USB is already installed in your system and you want to re-install
new version, first uninstall RELAQQS USB (See Uninstall Procedure), and only
then proceed to install new version.
To install RELAQQS USB for the first time:
-------------------------------------------
a) Plug in the RELAQQS USB modem into a USB port.
b) Windows98 will instantly detect the USB modem will start software installation.
c) When requested, point to the RELAQQS USB install diskette in the floppy drive or
CD-ROM drive.
d) RELAQQS USB drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------

To verify that RELAQQS USB is installed correctly, follow these steps:

a) In Control Panel - Modems: check for the presence of your USB modem.
To Check that RELAQQS USB is working properly:

a) Create a configuration (Direct to port or modem) of Hyper Terminal.

b) Run Hyper Terminal.
Type ATI1, ATI2 or ATI3 and make sure you receive the modem IDs.
Dial any accessible phone number, and see that that phone rings.
Dial to another modem (ATDTxxx or via the dial button of the TAPI
interface) and see that a modem session is established.

If you have successfully connected, then RELAQQS USB has been successfully
installed.
----------------------
3. Uninstall Procedure
----------------------
a) Go to Control Panel / Add/Remove Programs
b) Select "Uninstall RELAQQS USB Modem"
c) Click on Add/Remove Button
d) A confirmation window appears. Click "OK" to proceed.
e) RELAQQS USB drivers will be uninstalled.
f) You may un-plug the RELAQQS USB from the USB port.

Company

Lamaqq

Categories

Fax & Modem & ISDN

Model

Lamaqq USB Modem Typ RELAQQS Voice-Data-Fax

Description

Drivers

Operating System

Windows XP

Size Driver

2.3MB

File Name

usbxpv.zip

Observations

Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
9) Disclaimers

--------------
1. Quick Start
--------------

1) This version of RELAQQS USB drivers is only compatible with
Microsoft Windows XP and Windows 2000.

2) If any type of RELAQQS modem is already installed in your
system and you want to update its' device driver, first
uninstall existing drivers (See Uninstall Procedure), and only
then proceed to install the new drivers.
To install your modem drivers for the first time:
-------------------------------------------------
a) Plug in the modem into a USB port.

b) Windows will instantly detect the modem and will start software
installation.

c) When requested, point to the drivers installtion directory on
the floppy disk or CD-ROM.

d) Modem drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------

To verify that the modem is installed correctly, follow these steps:

a) Click "Start > Settings > Control Panel > Modem": check for the
presence of a "RELAQQS USB Modem".

b) In "Control Panel > Modems > Properties > Diagnostics" click on
"Query Modem" button and check that the modem responds.

To Check that the modem is working properly:

a) Open "Hyper Terminal".
b) Select the "RELAQQS USB Modem" or "Direct to port" option.
c) Type ATI1, ATI2 or ATI3 and make sure you receive the modem IDs.
Dial any accessible phone number, and see that that phone rings.
Dial to another modem (ATDTxxx or via the dial button of the
TAPI interface) and see that a modem session is established.

If you have successfully connected, then the modem has been
successfully installed.
----------------------
3. Uninstall Procedure
----------------------
a) Click "Start > Settings > Control Panel > Add/Remove Programs".

b) Select "RELAQQS USB Modem".

c) Click the "Add/Remove" button.

d) Modem drivers will be uninstalled. You may un-plug the modem
from the USB port.

Access to Official Website Lamaqq

Sorry, Lamaqq Official Website has disappeared!

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.