Available 4 files for Lamaqq PCI Modem Typ RELAQQS Voice-Data-Fax
Select Files
Company
Lamaqq
Categories
Fax & Modem & ISDN
Model
Lamaqq PCI Modem Typ RELAQQS Voice-Data-Fax
Description
Drivers
Operating System
Windows 2000
Size Driver
1.8MB
File Name
pci2kv.zip
Observations
Contents
--------
1) Installation
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
--------------
1. Installation
--------------
Important notes:
1) This driver supports RELAQQS PCI modem chipsets.
2) For RELAQQS PCI, this driver is compatible with
motherboards based on the Intel 810, 820, 815E, 820E, 440MX (Banister),
VIA VT82C686, SiS 540 / 630 and ALI M1535/M1535D+ core logic chipsets.
An updated list of compatible motherboards can be found on LAMAQQ's
web site (www.lamaqq.com).
3) This version of drivers was tested only with Microsoft
Windows 2000 Professional.
4) If a RELAQQS PCI modem is already installed in your system and you want
to update its' device driver, first uninstall existing drivers (See
Uninstall Procedure), and only then proceed to install the new drivers.
5) Before installing, check your RELAQQS PCI card for proper
setting of Primary or Secondary Codec Mode.
To install your modem drivers for the first time:
-------------------------------------------------
a) Turn your PC off, and remove the power cord.
NOTE: SOME PCI 2.2 MOTHERBOARDS KEEP THE SLOTS POWERED EVEN
WHEN THE PC IS TURNED OFF. TO PREVENT DAMAGE TO YOUR MODEM
AND YOUR PC, REMOVE THE POWER CORD.
b) Plug in the modem card into an AMR slot.
c) Restart your PC.
d) Windows 2000 will instantly detect the modem and will start
software installation.
e) When requested, point to the modem installtion directory on the floppy
disk or CD-ROM.
f) Modem drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------
To verify that the modem is installed correctly, follow these
steps:
a) In "Control Panel > Modems": check for the presence of your modem.
b) In "Control Panel > Modems > Properties > Diagnostics" click on
"Query Modem" button and check that the modem responds.
To Check that the modem is working properly:
a) Run Hyper Terminal.
b) Select the "RELAQQS PCI Modem" or "Direct to port" option.
Company
Lamaqq
Categories
Fax & Modem & ISDN
Model
Lamaqq PCI Modem Typ RELAQQS Voice-Data-Fax
Description
Drivers
Operating System
Windows 95-98-98Se
Size Driver
1.5MB
File Name
pci98v.zip
Observations
Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country Selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
--------------
1. Quick Start
--------------
Important notes:
1) This driver supports RELAQQS PCI modem chipsets.
2) For RELAQQS PCI, this driver is compatible with
motherboards based on the Intel 810, 820, 815E, 820E, 440MX (Banister),
VIA VT82C686, SiS 540 / 630 and ALI M1535/M1535D+ core logic chipsets.
An updated list of compatible motherboards can be found on LAMAQQ's
web site (www.lamaqq.com).
3) This version drivers is compatible with Microsoft Windows 95, Windows 98,
Windows 98SE (and Windows Millennium).
4) If a RELAQQS PCI modem is already installed in your system and you want
to update its' device driver, first uninstall existing drivers (See
Uninstall Procedure), and only then proceed to install the new drivers.
5) Before installing, check your RELAQQS PCI card for proper setting
of Primary or Secondary Codec Mode.
To install your modem drivers for the first time:
-------------------------------------------------
a) Turn your PC off, and remove the power cord.
NOTE: SOME PCI 2.2 MOTHERBOARDS KEEP THE SLOTS POWERED EVEN WHEN THE
PC IS TURNED OFF. TO PREVENT DAMAGE TO HAMR56XX AND YOUR PC, REMOVE
THE POWER CORD.
b) Plug in your HAMR5600 or SmartRiser56 modem card into an AMR slot, or your
RELAQQS PCI card into a free PCI slot.
c) Restart your PC.
b) Windows will instantly detect the modem and will start software installation.
c) When requested, point to the drivers installation disk in the
floppy drive or CD-ROM drive.
d) Modem drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------
To verify that the modem is installed correctly, follow these steps:
a) Click "Start > Settings > Control Panel > Modem": check for the presence
of a "RELAQQS PCI Modem".
To Check that the modem is working properly:
a) Open "Hyper Terminal" and select your modem (or "Direct to port").
Company
Lamaqq
Categories
Fax & Modem & ISDN
Model
Lamaqq PCI Modem Typ RELAQQS Voice-Data-Fax
Description
Drivers
Operating System
Windows Me
Size Driver
1.8MB
File Name
pcimev.zip
Observations
Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country Selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
--------------
1. Quick Start
--------------
Important notes:
1) This driver supports RELAQQS PCI modem chipsets.
2) For RELAQQS PCI, this driver is compatible with
motherboards based on the Intel 810, 820, 815E, 820E, 440MX (Banister),
VIA VT82C686, SiS 540 / 630 and ALI M1535/M1535D+ core logic chipsets.
An updated list of compatible motherboards can be found on LAMAQQ's
web site (www.lamaqq.com).
3) This version drivers is compatible with Microsoft Windows 95, Windows 98,
Windows 98SE and Windows Millennium.
4) If a Smart Link modem is already installed in your system and you want
to update its' device driver, first uninstall existing drivers (See
Uninstall Procedure), and only then proceed to install the new drivers.
5) Before installing, check your RELAQQS PCI card for proper setting
of Primary or Secondary Codec Mode.
To install your modem drivers for the first time:
-------------------------------------------------
a) Turn your PC off, and remove the power cord.
NOTE: SOME PCI 2.2 MOTHERBOARDS KEEP THE SLOTS POWERED EVEN WHEN THE
PC IS TURNED OFF. TO PREVENT DAMAGE TO HAMR56XX AND YOUR PC, REMOVE
THE POWER CORD.
b) Plug in your RELAQQS AMR modem card into an AMR slot, or your
RELAQQS PCI card into a free PCI slot.
c) Restart your PC.
b) Windows will instantly detect the modem and will start software installation.
c) When requested, point to the drivers installation disk in the
floppy drive or CD-ROM drive.
d) Modem drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------
To verify that the modem is installed correctly, follow these steps:
a) Click "Start > Settings > Control Panel > Modem": check for the presence
of a "RELAQQS PCI Modem".
To Check that the modem is working properly:
a) Open "Hyper Terminal" and select your modem (or "Direct to port").
b) Run Hyper Terminal.
Company
Lamaqq
Categories
Fax & Modem & ISDN
Model
Lamaqq PCI Modem Typ RELAQQS Voice-Data-Fax
Description
Drivers
Operating System
Windows XP
Size Driver
2.4MB
File Name
pcixpv.zip
Observations
Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
9) Disclaimers
--------------
1. Quick Start
--------------
1) This version of RELAQQS PCI 56K Voice Modem drivers is only compatible with
Microsoft Windows XP and Windows 2000.
2) If any type of RELAQQS modem is already installed in your
system and you want to update its' device driver, first
uninstall existing drivers (See Uninstall Procedure), and only
then proceed to install the new drivers.
To install your modem drivers for the first time:
-------------------------------------------------
a) Plug in the modem into a USB port.
b) Windows will instantly detect the modem and will start software
installation.
c) When requested, point to the drivers installtion directory on
the floppy disk or CD-ROM.
d) Modem drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------
To verify that the modem is installed correctly, follow these steps:
a) Click "Start > Settings > Control Panel > Modem": check for the
presence of a "SmartUSB56 Modem".
b) In "Control Panel > Modems > Properties > Diagnostics" click on
"Query Modem" button and check that the modem responds.
To Check that the modem is working properly:
a) Open "Hyper Terminal".
b) Select the "RELAQQS PCI 56K Voice Modem" or "Direct to port" option.
c) Type ATI1, ATI2 or ATI3 and make sure you receive the modem IDs.
Dial any accessible phone number, and see that that phone rings.
Dial to another modem (ATDTxxx or via the dial button of the
TAPI interface) and see that a modem session is established.
If you have successfully connected, then the modem has been
successfully installed.
----------------------
3. Uninstall Procedure
----------------------
a) Click "Start > Settings > Control Panel > Add/Remove Programs".
b) Select "RELAQQS PCI 56K Voice Modem".
c) Click the "Add/Remove" button.
d) Modem drivers will be uninstalled. You may un-plug the modem
from the USB port.
Access to Official Website Lamaqq
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.