Available 4 files for Lamaqq PCI Modem Typ RELAQQS Data-Fax
Select Files
Company
Lamaqq
Categories
Fax & Modem & ISDN
Model
Lamaqq PCI Modem Typ RELAQQS Data-Fax
Description
Drivers
Operating System
Windows 2000
Size Driver
1.8MB
File Name
pci2k.zip
Observations
Contents
--------
1) Installation
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
--------------
1. Installation
--------------
Important notes:
1) This driver supports RELAQQS modem chipsets.
2) For RELAQQS PCI Modem, this driver is compatible with
motherboards based on the Intel 810, 820, 815E, 820E, 440MX (Banister),
VIA VT82C686, SiS 540 / 630 and ALI M1535/M1535D+ core logic chipsets.
An updated list of compatible motherboards can be found on Smart Link's
web site (www.lamaqq.com).
3) This version of drivers was tested only with Microsoft
Windows 2000 Professional.
4) If a RELAQQS modem is already installed in your system and you want
to update its' device driver, first uninstall existing drivers (See
Uninstall Procedure), and only then proceed to install the new drivers.
5) Before installing, check your RELAQQS PCI card for proper
setting of Primary or Secondary Codec Mode.
To install your modem drivers for the first time:
-------------------------------------------------
a) Turn your PC off, and remove the power cord.
NOTE: SOME PCI 2.2 MOTHERBOARDS KEEP THE SLOTS POWERED EVEN
WHEN THE PC IS TURNED OFF. TO PREVENT DAMAGE TO YOUR MODEM
AND YOUR PC, REMOVE THE POWER CORD.
b) Plug in the modem card into an AMR slot.
c) Restart your PC.
d) Windows 2000 will instantly detect the modem and will start
software installation.
e) When requested, point to the modem installtion directory on the floppy
disk or CD-ROM.
f) Modem drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------
To verify that the modem is installed correctly, follow these
steps:
a) In "Control Panel > Modems": check for the presence of your modem.
b) In "Control Panel > Modems > Properties > Diagnostics" click on
"Query Modem" button and check that the modem responds.
To Check that the modem is working properly:
a) Run Hyper Terminal.
b) Select the "RELAQQS PCI Modem" or "Direct to port" option.
Company
Lamaqq
Categories
Fax & Modem & ISDN
Model
Lamaqq PCI Modem Typ RELAQQS Data-Fax
Description
Drivers
Operating System
Windows 95-98-98Se
Size Driver
1.5MB
File Name
pci98.zip
Observations
Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country Selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
--------------
1. Quick Start
--------------
Important notes:
1) This driver supports RELAQQS PCI modem chipsets.
2) For RELAQQS PCI, this driver is compatible with
motherboards based on the Intel 810, 820, 815E, 820E, 440MX (Banister),
VIA VT82C686, SiS 540 / 630 and ALI M1535/M1535D+ core logic chipsets.
An updated list of compatible motherboards can be found on LAMAQQ's
web site (www.lamaqq.com).
3) This version drivers is compatible with Microsoft Windows 95, Windows 98,
Windows 98SE (and Windows Millennium).
4) If a RELAQQS modem is already installed in your system and you want
to update its' device driver, first uninstall existing drivers (See
Uninstall Procedure), and only then proceed to install the new drivers.
5) Before installing, check your RELAQQS PCI card for proper setting
of Primary or Secondary Codec Mode.
To install your modem drivers for the first time:
-------------------------------------------------
a) Turn your PC off, and remove the power cord.
NOTE: SOME PCI 2.2 MOTHERBOARDS KEEP THE SLOTS POWERED EVEN WHEN THE
PC IS TURNED OFF. TO PREVENT DAMAGE TO HAMR56XX AND YOUR PC, REMOVE
THE POWER CORD.
b) Plug in your RELAQQS AMR modem card into an AMR slot, or your
RELAQQS PCI card into a free PCI slot.
c) Restart your PC.
b) Windows will instantly detect the modem and will start software installation.
c) When requested, point to the drivers installation disk in the
floppy drive or CD-ROM drive.
d) Modem drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------
To verify that the modem is installed correctly, follow these steps:
a) Click "Start > Settings > Control Panel > Modem": check for the presence
of a "RELAQQS PCI Modem".
To Check that the modem is working properly:
a) Open "Hyper Terminal" and select your modem (or "Direct to port").
b) Run Hyper Terminal.
Company
Lamaqq
Categories
Fax & Modem & ISDN
Model
Lamaqq PCI Modem Typ RELAQQS Data-Fax
Description
Drivers
Operating System
Windows Me
Size Driver
1.8MB
File Name
pcime.zip
Observations
Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country Selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
--------------
1. Quick Start
--------------
Important notes:
1) This driver supports RELAQQS PCI modem chipsets.
2) For RELAQQS PCI, this driver is compatible with
motherboards based on the Intel 810, 820, 815E, 820E, 440MX (Banister),
VIA VT82C686, SiS 540 / 630 and ALI M1535/M1535D+ core logic chipsets.
An updated list of compatible motherboards can be found on LAMAQQ's
web site (www.lamaqq.com).
3) This version drivers is compatible with Microsoft (Windows 95, Windows 98,
Windows 98SE and) Windows Millennium.
4) If a Smart Link modem is already installed in your system and you want
to update its' device driver, first uninstall existing drivers (See
Uninstall Procedure), and only then proceed to install the new drivers.
5) Before installing, check your RELAQQS PCI card for proper setting
of Primary or Secondary Codec Mode.
To install your modem drivers for the first time:
-------------------------------------------------
a) Turn your PC off, and remove the power cord.
NOTE: SOME PCI 2.2 MOTHERBOARDS KEEP THE SLOTS POWERED EVEN WHEN THE
PC IS TURNED OFF. TO PREVENT DAMAGE TO HAMR56XX AND YOUR PC, REMOVE
THE POWER CORD.
b) Plug in your RELAQQS AMR modem card into an AMR slot, or your
RELAQQS PCI card into a free PCI slot.
c) Restart your PC.
b) Windows will instantly detect the modem and will start software installation.
c) When requested, point to the drivers installation disk in the
floppy drive or CD-ROM drive.
d) Modem drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------
To verify that the modem is installed correctly, follow these steps:
a) Click "Start > Settings > Control Panel > Modem": check for the presence
of a "RELAQQS PCI Modem".
To Check that the modem is working properly:
a) Open "Hyper Terminal" and select your modem (or "Direct to port").
b) Run Hyper Terminal.
Company
Lamaqq
Categories
Fax & Modem & ISDN
Model
Lamaqq PCI Modem Typ RELAQQS Data-Fax
Description
Drivers
Operating System
Windows NT4
Size Driver
2MB
File Name
pcint4.zip
Observations
Contents
--------
1) Installation
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country Selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
--------------
1. Installation
--------------
Important notes:
1) This driver supports RELAQQS PCI modem chipsets.
2) For RELAQQS PCI, this driver is compatible with
motherboards based on the Intel 810, 820, 815E, 820E, 440MX (Banister),
VIA VT82C686, SiS 540 / 630 and ALI M1535/M1535D+ core logic chipsets.
An updated list of compatible motherboards can be found on LAMAQQ's
web site (www.lamaqq.com).
3) This version of drivers is compatible only with Microsoft
Windows NT 4.0.
4) If a RELAQQS modem is already installed in your system and you want
to update its' device driver, first uninstall existing drivers (See
Uninstall Procedure), and only then proceed to install the new drivers.
5) Before installing, check your RELAQQS PCI card for proper
setting of Primary or Secondary Codec Mode.
To install your modem drivers for the first time:
-------------------------------------------------
Note: Windows NT 4.0 is not a Plug and Play operating system in
the extent featured in Windows 95/98. This single fact is the cause
for much confusion with OEM's who are most familiar with
Windows 98/95. The Installation process for the modem is the same
as for Programs.
a) Open the installation folder or CD-ROM, and double-click on the
"Setup.exe" icon. Follow the instructions on the screen.
b) When requested, replace the installation disks according to the
instructions on the screen.
c) You must choose a Communication Port which will be used for
your modem. It is recommended to choose Port with number 3 or 4
because some old applications (16-bit) do not support a port higher
then COM4.
d) After files are copied, you will be asked to continue installation
by standard Modem Installer.
e) Click the "Next" button.
Because the modem is not yet installed, it can't be detected by the
System. We recommend you to check "Do not detect my modem..." and
select a modem from the list.
f) Choose Manufacturer and Model from the list and press Next button.
Your Manufacturer is "Modem Vendor", Model is "RELAQQS PCI Modem".
g) Select your desired Communication Port.
h) Reboot your computer.
Access to Official Website Lamaqq
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.