Available 4 files for Keydata Keynote 6660 N34AS1
Select Files
Company
Keydata
Categories
Fax & Modem & ISDN
Model
Keydata Keynote 6660 N34AS1
Description
Modem Driver
Operating System
Windows 2000
Size Driver
2.3MB
File Name
6660-modem-2k.exe
Observations
Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
9) Disclaimers
--------------
1. Quick Start
--------------
1) This version of SmartUSB56 drivers is only compatible with
Microsoft Windows XP and Windows 2000.
2) If any type of Smart Link modem is already installed in your
system and you want to update its' device driver, first
uninstall existing drivers (See Uninstall Procedure), and only
then proceed to install the new drivers.
To install your modem drivers for the first time:
-------------------------------------------------
a) Plug in the modem into a USB port.
b) Windows will instantly detect the modem and will start software
installation.
c) When requested, point to the drivers installtion directory on
the floppy disk or CD-ROM.
d) Modem drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------
To verify that the modem is installed correctly, follow these steps:
a) Click "Start > Settings > Control Panel > Modem": check for the
presence of a "SmartUSB56 Modem".
b) In "Control Panel > Modems > Properties > Diagnostics" click on
"Query Modem" button and check that the modem responds.
To Check that the modem is working properly:
a) Open "Hyper Terminal".
b) Select the "SmartUSB56 Modem" or "Direct to port" option.
c) Type ATI1, ATI2 or ATI3 and make sure you receive the modem IDs.
Dial any accessible phone number, and see that that phone rings.
Dial to another modem (ATDTxxx or via the dial button of the
TAPI interface) and see that a modem session is established.
If you have successfully connected, then the modem has been
successfully installed.
----------------------
3. Uninstall Procedure
----------------------
a) Click "Start > Settings > Control Panel > Add/Remove Programs".
b) Select "SmartUSB56 Modem".
c) Click the "Add/Remove" button.
Company
Keydata
Categories
Fax & Modem & ISDN
Model
Keydata Keynote 6660 N34AS1
Description
Modem Driver
Operating System
Windows 98
Size Driver
2MB
File Name
6660-modem-9x.exe
Observations
Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country Selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
9) Disclaimers
--------------
1. Quick Start
--------------
1) This driver supports HAMR5600, SmartRiser56 and SmartPCI56
modem chipsets.
2) For HAMR5600 and SmartRiser56, this driver is compatible with
motherboards based on Intel 810, 820, 815E, 820E, 850, 440MX
(Banister), VIA VT82C686, VIA KT266, VIA 8231, SiS 540 / 630
and ALI M1535/M1535D+ core logic chipsets.
All riser card form factors are supported (AMR/MDC, CNR and ACR).
For up-to-date information about compatible motherboards, turn
to Smart Link web site (www.smlink.com).
3) This version of drivers is compatible with Microsoft
Windows 95, Windows 98, Windows 98SE and Windows ME.
4) If any type of Smart Link modem is already installed in your
system and you want to update its' device driver, first
uninstall existing drivers (See Uninstall Procedure), and only
then proceed to install the new drivers.
5) Before installing, check your riser card for proper jumper
setting of Primary or Secondary Codec Mode. SmartPCI56 modems
have no jumpers to set.
To install your modem drivers for the first time:
-------------------------------------------------
a) Turn your PC off, and remove the power cord.
NOTE: SOME PCI 2.2 MOTHERBOARDS KEEP THE SLOTS POWERED EVEN
WHEN THE PC IS TURNED OFF. TO PREVENT DAMAGE TO YOUR MODEM
AND YOUR PC, REMOVE THE POWER CORD.
b) Plug in your modem card into a free slot (AMR, CNR or ACR slot
for HAMR5600 and SmartRiser56; PCI slot for SmartPCI56).
c) Restart your PC.
d) Windows will instantly detect the modem and will start software
installation.
e) When requested, point to the drivers installtion directory on the
floppy disk or CD-ROM.
f) Modem drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------
To verify that the modem is installed correctly, follow these steps:
a) Click "Start > Settings > Control Panel > Modem": check for the
presence of a "Smart Link 56K Modem".
Company
Keydata
Categories
Fax & Modem & ISDN
Model
Keydata Keynote 6660 N34AS1
Description
Modem Driver
Operating System
Windows Me
Size Driver
2.3MB
File Name
6660-modem-me.exe
Observations
Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country Selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
9) Disclaimers
--------------
1. Quick Start
--------------
1) This driver supports HAMR5600, SmartRiser56 and SmartPCI56
modem chipsets.
2) For HAMR5600 and SmartRiser56, this driver is compatible with
motherboards based on Intel 810, 820, 815E, 820E, 850, 440MX
(Banister), VIA VT82C686, VIA KT266, VIA 8231, SiS 540 / 630
and ALI M1535/M1535D+ core logic chipsets.
All riser card form factors are supported (AMR/MDC, CNR and ACR).
For up-to-date information about compatible motherboards, turn
to Smart Link web site (www.smlink.com).
3) This version of drivers is only compatible with Microsoft Windows Me.
4) If any type of Smart Link modem is already installed in your
system and you want to update its' device driver, first
uninstall existing drivers (See Uninstall Procedure), and only
then proceed to install the new drivers.
5) Before installing, check your riser card for proper jumper
setting of Primary or Secondary Codec Mode. SmartPCI56 modems
have no jumpers to set.
To install your modem drivers for the first time:
-------------------------------------------------
a) Turn your PC off, and remove the power cord.
NOTE: SOME PCI 2.2 MOTHERBOARDS KEEP THE SLOTS POWERED EVEN
WHEN THE PC IS TURNED OFF. TO PREVENT DAMAGE TO YOUR MODEM
AND YOUR PC, REMOVE THE POWER CORD.
b) Plug in your modem card into a free slot (AMR, CNR or ACR slot
for HAMR5600 and SmartRiser56; PCI slot for SmartPCI56).
c) Restart your PC.
d) Windows will instantly detect the modem and will start software
installation.
e) When requested, point to the drivers installtion directory on the
floppy disk or CD-ROM.
f) Modem drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------
To verify that the modem is installed correctly, follow these steps:
a) Click "Start > Settings > Control Panel > Modem": check for the
presence of a "Smart Link 56K Modem".
Company
Keydata
Categories
Fax & Modem & ISDN
Model
Keydata Keynote 6660 N34AS1
Description
Modem Driver
Operating System
Windows XP
Size Driver
2.4MB
File Name
6660-modem-xp.exe
Observations
Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
9) Disclaimers
--------------
1. Quick Start
--------------
1) This version of SmartUSB56 drivers is only compatible with
Microsoft Windows XP and Windows 2000.
2) If any type of Smart Link modem is already installed in your
system and you want to update its' device driver, first
uninstall existing drivers (See Uninstall Procedure), and only
then proceed to install the new drivers.
To install your modem drivers for the first time:
-------------------------------------------------
a) Plug in the modem into a USB port.
b) Windows will instantly detect the modem and will start software
installation.
c) When requested, point to the drivers installtion directory on
the floppy disk or CD-ROM.
d) Modem drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------
To verify that the modem is installed correctly, follow these steps:
a) Click "Start > Settings > Control Panel > Modem": check for the
presence of a "SmartUSB56 Modem".
b) In "Control Panel > Modems > Properties > Diagnostics" click on
"Query Modem" button and check that the modem responds.
To Check that the modem is working properly:
a) Open "Hyper Terminal".
b) Select the "SmartUSB56 Modem" or "Direct to port" option.
c) Type ATI1, ATI2 or ATI3 and make sure you receive the modem IDs.
Dial any accessible phone number, and see that that phone rings.
Dial to another modem (ATDTxxx or via the dial button of the
TAPI interface) and see that a modem session is established.
If you have successfully connected, then the modem has been
successfully installed.
----------------------
3. Uninstall Procedure
----------------------
a) Click "Start > Settings > Control Panel > Add/Remove Programs".
b) Select "SmartUSB56 Modem".
c) Click the "Add/Remove" button.
Access to Official Website Keydata
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.