Available 6 files for Jaton XpressNet

 

Select Files

Company

Jaton

Categories

Fax & Modem & ISDN

Model

Jaton XpressNet

Description

Drivers

Operating System

Dos ODI NetWare Client

Version

1.2

Size Driver

232KB

File Name

dosodi.zip

Observations

A) Install DOS ODI Driver on Netware Server

Files Description :
===================

\DOSODI\DM9PCI.COM DM9102 DOS ODI Driver
\DOSODI\DM9PCI.INS DM9102 DOS ODI Driver Installation File

A) Install DOS ODI Driver on Netware Server
===========================================

1. Turn OFF your PC machine.
2. Plug the DM9102 PCI Fast Ethernet Adapter into the PCI slot
of PC machine.
3. Reboot your PC machine to DOS prompt.
4. Insert the Driver diskette to the floppy (Drive A) and
run the following command to log into the Netware server.

C:\> A:
A:\> CD \DOSODI
A:\DOSODI> STARTNET.BAT

5. Change directory to Netware Client installation directory.

F:\> CD \PUBLIC\CLIENT\VLM\IBM_6 (for Netware 4.11)
(or F:\> CD \PUBLIC\CLIENT\DOSWIN for Netware 4.10)

6. Run "INSTALL" to install the Netware Client files.

F:\PUBLIC\CLIENT\VLM\IBM_6> INSTALL.EXE

7. Select "Select the driver for your network board."
to install driver.
8. Insert the Driver diskette to the floppy (Drive A) and
enter "A:\DOSODI" to specify a directory path.
9. Select "DAVICOM PCI Fast Ethernet Adapter (DM9102)" to configure
driver parameters.
10. Select "DAVICOM PCI Fast Ethernet Adapter (DM9102)" in Network Board
to configure driver parameters.
11. Choose the driver parameter (Line Speed, Media Type),
if NO value, it will be the default value.

Line Speed : NO default value. (10, 100)
Media Type : the default is AUTO. (AUTO, AUTOFULL, AUTOHALF,
100FULL, 100HALF, 10FULL, 10HALF, 1M)

12. Press key to save the driver parameters into NET.CFG file.
13. Select "Highlight here and press to Install."
to complete the driver installation.

Company

Jaton

Categories

Fax & Modem & ISDN

Model

Jaton XpressNet

Description

Drivers

Operating System

Windows 95

Version

2.32

Size Driver

25KB

File Name

win95.zip

Observations

Introduction:
=============

This document shows you how to setup the driver and how to use the enhanced
functions by setting the custom keywords.
Contents of the Subdirectory:
=============================

DM9PCI.SYS The NDIS3 driver for WIN95.
NETDM.INF The installation information file.
README.TXT This file.
Installation:
=============

Before starting with the installation process, make sure that the adapter
is properly installed and configured. You can use the diagnostic program
(A:\DIAG9102.EXE) in DOS mode to make sure your connection with the network is
correct.

1. Turn the power of your PC on to boot from WIN95. WIN95 may
auto-detect your new adapter installed, and the "New Hardware Found"
dialogue box will appear. Select "Driver from disk provided by hardware
manufacturer" to install driver from the diskette that come with your
lan adapter.

Note: If your new adapter is not detected by WIN95, you can open
"My Computer" -> "Control Panel" -> "Networks" after WIN95 comes up,
and select "Add adapter" -> "Have disk" to install driver from the
diskette that come with your lan adapter.

2. Insert the driver diskette into your floppy drive, and specify the
path of the driver in the diskette(i.e. A:\WIN95) to copy the driver
files to your system.

3. Select "DAVICOM PCI Fast Ethernet Adapter (DM9102)", and start to copy the driver
files to your system.

4. When the driver installation is completed, restart WIN95.

Company

Jaton

Categories

Fax & Modem & ISDN

Model

Jaton XpressNet

Description

Drivers

Operating System

Windows 98

Version

0.13

Size Driver

29KB

File Name

win98.zip

Observations

Introduction:
=============

This document shows you how to setup the driver and how to use the enhanced
functions by setting the custom keywords.
Contents of the Subdirectory:
=============================

DM9PCI5.SYS The NDIS5 driver for Windows 98.
NET5DM.INF The installation information file.
README.TXT This file.
Installation:
=============

Before starting with the installation process, make sure that the adapter
is properly installed and configured. You can use the diagnostic program
(DIAG9102.EXE) in DOS mode to make sure your connection with the network is
correct.

1. Turn the power of your PC on to boot from WIN98. WIN98 may
auto-detect your new adapter installed, and the "New Hardware Found"
dialogue box will appear. Select "Driver from disk provided by hardware
manufacturer" to install driver from the diskette that come with your
lan adapter.

Note: If your new adapter is not detected by WIN98, you can open
"My Computer" -> "Control Panel" -> "Networks" after WIN98 comes up,
and select "Add adapter" -> "Have disk" to install driver from the
diskette that come with your lan adapter.

2. Insert the driver diskette into your floppy drive, and specify the
path of the driver in the diskette(i.e. A:\Drivers\WIN98) to copy the driver
files to your system.

3. Select "DAVICOM PCI Fast Ethernet Adapter (DM9102)", and start to copy the driver
files to your system.

4. When the driver installation is completed, restart WIN98.

5. Note: Select Item
DAVICOM PCI Fast Ethernet Adapter (DM9102) - Don't check Sub System/Vendor ID.
DAVICOM 9102 PCI Fast Ethernet Adapter - Must have correct Sub System/Vendor ID.

Company

Jaton

Categories

Fax & Modem & ISDN

Model

Jaton XpressNet

Description

Drivers

Operating System

Windows NT3.5

Version

2.31

Size Driver

86KB

File Name

winnt351.exe

Observations

Introduction:
=============

This document shows you how to setup the driver and how to use the enhanced
functions by setting the custom keywords.
Contents of the Subdirectory:
=============================

DM9PCI.SYS The NDIS4 driver for Windows NT.
DMLAN.HLP The help file.
OEMSETUP.INF The setup information file.
README.TXT This file.
Installation:
=============

Before starting with the installation process, make sure that the adapter
is properly installed and configured. You can use the diagnostic program
(A:\DIAG9102.EXE) in DOS mode to make sure your connection with the network is
correct.

1. Open "Control Panel" -> "Networks", and choose the "Add Adapter" button.
The Add Noetwork Adapter dialog box appears. Select " Requires
disk from manufacturer" in the list of Network Adapters, and then press
.

2. Insert the driver diskette into your floppy drive, and specify the
path of the driver in the diskette(i.e. A:\WINNT40) if necessary.

3. Select "DAVICOM PCI Fast Ethernet Adapter (DM9102)", and start to copy the driver
files to your system.

4. After all the driver files have been copied to your system, a property
dialog box appears in the screen. You can enable the special properties
if you want to.

5. When the driver installation is completed, restart your PC.

Company

Jaton

Categories

Fax & Modem & ISDN

Model

Jaton XpressNet

Description

Drivers

Operating System

Windows NT4.0

Version

2.39

Size Driver

37KB

File Name

winnt40.zip

Observations

[Identification]
OptionType = NetAdapter
[PlatformsSupported]
PCI
[Options]
DM9102
[ConnectionChoicesDM9102]
Connect_0 = "AutoSense", 0
Connect_2 = "100 Mbps", 2
Connect_3 = "100 Mbps Full_Duplex", 4
Connect_4 = " 10 Mbps", 1
Connect_5 = " 10 Mbps Full_Duplex", 3

[FileConstants]
UtilityInf = "UTILITY.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer = "CNET Technology, Inc."
ProductMajorVersion = "2"
ProductMinorVersion = "21"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)

VendorID = 4738 ;; 1282 Vendor Identification
;DeviceID = 37120 ;; 9100 Device Identification
DM9102ID = 37122 ;; 9102 Device Identification
ProductSoftwareName = "DM9PCI"
ProductSoftwareTitle = "DAVICOM 9102/A Based Adapter Driver "
ProductSoftwareImagePath3 = "\SystemRoot\System32\drivers\DM9PCI3.sys"
ProductSoftwareImagePath4 = "\SystemRoot\System32\drivers\DM9PCI4.sys"
ProductSoftwareDriverPath3 = $(!STF_WINDOWSSYSPATH)"\DRIVERS\dm9pci3.sys"
ProductSoftwareDriverPath4 = $(!STF_WINDOWSSYSPATH)"\DRIVERS\dm9pci4.sys"
NetRuleSoftwareType = "DM9PCISys ndisDriver DM9PCIDriver"
NetRuleSoftwareType = "DM9PCISys ndisDriver DM9PCIDriver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """DM9PCISys"" yes no container"
NetRuleSoftwareClass = {"DM9PCIDriver basic"}
NetRuleSoftwareSWBindable = {"DM9PCIDriver DM9102Adapter non exclusive 100"}

OptionHelpFile = "DMLAN.HLP"
ProductHardwareName = "DM9PCI"
InstallerDllName = "DM9INST.DLL"
InstallerProc = "DM9InstNtProc"
ProductHardwareDM9102Title = "DAVICOM 9102/A PCI Fast Ethernet Adapter "
NetRuleHardwareDM9102Type = "DM9102 DM9102Adapter"
NetRuleHardwareDM9102Class = {"DM9102 Adapter basic"}
AdapterDM9102Type = 5 ;; PCI board
HelpDM9102Id = 30
;DM9100PCIID = 2432701058 ;; 0x91001282 VendorID+DeviceID
DM9102PCIID = 2432832130 ;; 0x91021282 VendorID+DeviceID

NetRuleHardwareBindForm = " yes yes container"
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
;simoncc
VersionKeyName = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion"

[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432

Company

Jaton

Categories

Fax & Modem & ISDN

Model

Jaton XpressNet

Description

Drivers

Operating System

Windows NT5.0-Windows 2000

Version

0.13

Size Driver

22KB

File Name

winnt50.zip

Observations

Introduction:
=============

This document shows you how to setup the driver and how to use the enhanced
functions by setting the custom keywords.
Contents of the Subdirectory:
=============================

DM9PCI5.SYS The NDIS5 driver for Windows NT.
NET5DM.INF The setup information file.
README.TXT This file.
Installation:
=============

Before starting with the installation process, make sure that the adapter
is properly installed and configured. You can use the diagnostic program
(A:\DIAG9102.EXE) in DOS mode to make sure your connection with the network is
correct.

1. Open "Control Panel" -> "Networks", and choose the "Add Adapter" button.
The Add Noetwork Adapter dialog box appears. Select " Requires
disk from manufacturer" in the list of Network Adapters, and then press
.

2. Insert the driver diskette into your floppy drive, and specify the
path of the driver in the diskette(i.e. A:\WINNT50) if necessary.

3. Select "DAVICOM PCI Fast Ethernet Adapter (DM9102)", and start to copy the driver
files to your system.

4. After all the driver files have been copied to your system, a property
dialog box appears in the screen. You can enable the special properties
if you want to.

5. When the driver installation is completed, restart your PC.

Access to Official Website Jaton

Sorry, Jaton Official Website has disappeared!

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.