Available 5 files for E-Tech ADWL01
Select Files
Company
E-Tech
Categories
Fax & Modem & ISDN
Model
E-Tech ADWL01
Description
Wireless 11Mbps ADSL Modem Router
Operating System
Firmware 3.46
Version
734CE_HL_031004.01F
Size Driver
3.4MB
File Name
346_wireless.zip
Observations
1. Firewall Configuration
A firewall is a method of implementing common as well as user defined security
policies in an effort to keep intruders out. Firewalls work by analyzing and
filtering out IP packets that violate a set of rules defined by the firewall
administrator. The firewall is located at the point of entry for the network. All
data inbound and outbound must pass through the firewall for inspection.
Advanced Options: This section contains options for protecting against
particular wellknown attacks as well as documenting those attacks as they occur.
Firewall Databases: This section allows you to create groups based on IP
addresses, subnet masks, ports, and time. These groups are used when creating
inbound and outbound policies.
Inbound/Outbound Policies: This section allows you to create rules for
incoming and outgoing IP packets. The IP packets are compared against the rules
and are allowed or denied accordingly.
Firewall Enable/Disable: This option enables/disables all the protection
provided on these pages.
1.1 Protection Policy
Protection Policies defend against common methods of attacking a network and
computers within the network. Some of these attacks are classified as a DoS
(Denial of Service). DoS is an attack in which a network or components of a
network are disabled, usually by overloading traffic on the network, in order to
prevent authorized and legitimate users to access network resources.
Basic Protection:
• IP Spoofing checking: IP spoofing is when an unauthorized user inserts the IP
address of an authorized user into the IP packets in order to gain access to a
network. Selecting this option will allow the firewall to check for and filter out this
discrepancy.
• Ping of Death checking: Ping of Death is a type of DoS attack that uses a
malformed ICMP data packet that contains unusually large amounts of data that
causes TCP/IP to crash or behave irregularly. Enabling this will allow the firewall
to filter out packets containing Ping of Death properties.
• Land Attack checking: Land attack is a type of DoS attack that works by
sending a spoofed packet containing the same source and destination IP address
and port (the victim’s IP address). This packet contains a connection request,
resulting in a handshake process. At the end of the handshake, the victim sends
out an ACK (ACKnowledge) request. Since the source and the destination are the
same, the victim receives the ACK request it just sent out. The received data
does not match what the victim is expecting, so it retransmits the ACK request.
This process repeats until the network crashes. Enabling this will allow the firewall
to filter out possible Land Attack packets.
• Reassembly Attack checking: Reassembly Attack is a type of DoS attack that
exploits the weakness of the IP protocol reassembly process. As discussed earlier
in this user guide, packets undergo fragmentation when they exceed a certain
maximum size. Certain criteria define the packet fragmentation process so that
packets can be reassembled properly. In Reassembly Attack, the subpackets have
malformed criteria (fragment offset), which can easily cause a system to crash,
freeze, or reboot. Enable this option to check for and filter out Reassembly Attack
packets.
Company
E-Tech
Categories
Fax & Modem & ISDN
Model
E-Tech ADWL01
Description
Wireless 11Mbps ADSL Modem Router
Information
Beveiligingsinstructies
Operating System
Manual
Size Driver
68KB
File Name
secure.pdf
Observations
For analogue line and ISDN
Instructies voor het wijzigen van het router-wachtwoord, en het beveiligen van uw modem.
Company
E-Tech
Categories
Fax & Modem & ISDN
Model
E-Tech ADWL01
Description
Wireless 11Mbps ADSL Modem Router
Operating System
Optional driver for usb port
Size Driver
283KB
File Name
usbnet_051402_rel10.zip
Observations
For analogue line and ISDN
We raden u aan de de utp poorten te gebruiken ipv usb
We encourage to use the utp ports instead of the usb port
Company
E-Tech
Categories
Fax & Modem & ISDN
Model
E-Tech ADWL01
Description
Wireless 11Mbps ADSL Modem Router
Operating System
Manual
Language Manual
Dutch
Size Driver
530KB
File Name
router_wireless_adsl.doc
Observations
For analogue line and ISDN
Handleiding voor firmware 3.40 gui en hoger.
(Dutch) Manual for v3.40 and up.
Company
E-Tech
Categories
Fax & Modem & ISDN
Model
E-Tech ADWL01
Description
Wireless 11Mbps ADSL Modem Router
Operating System
Manual
Version
3.40
Language Manual
Dutch
Size Driver
880KB
File Name
340_wireless_manual.doc
Observations
For analogue line and ISDN
Access to Official Website E-Tech
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.