Available 7 files for E-Tech ADRT03
Select Files
Company
E-Tech
Categories
Fax & Modem & ISDN
Model
E-Tech ADRT03
Description
ADSL Modem router Annex A
Operating System
Engelse Handleiding
Version
3.46
Size Driver
684KB
File Name
adrt03_usa_manual.zip
Observations
Introduction
Using this ADSL router, you can connect one or more pc’s to your adsl line.
The installation of this router consists of 3 steps:
1. Connecting cables
2. Configuring your Windows or Apple OS
3. Configuring the router for your Internet Provider
LED Explanation
POWER Will be lit when the router has power
READY Will be lit a few seconds after the router has booted. This led can also blink. If the led is NOT LIT this indicates a problem in the router.
SHOWTIME/ADSL This led will be lit constantly when the adsl line has been synchronised. This can take up to 30 seconds. During this period, it will blink to indicate activation. If this led is not lit or blinking, please contact your supplier.
If this led keeps blinking, please check adsl connection, and cabling.splitters.
RxD Shows activity on the adsl connection.
LINK 1,2,3 en 4 Indicates a PC connected to the respective LAN ports.
These will blink to indicate traffic on the LAN ports..
2. Configuring the PC
The router’s e built-in DHCP-server assigns your computers an ip address automatically. As such, your pc should be set to ‘obtain an ip automatically’
(Tip: Try to open http://10.0.0.2 in a browser. If you get a login prompt, skip the steps below, as your pc is already correctly configured. You can skip straight to step 3 – configuring your router.)
2a ) Configuring Windows 95, 98 and ME
1. Check if your network card has been installed
2. Click Start -> Settings -> Control panel -> Network
3. The screen below will be displayed:
Select the TCP/IP entry that is used for your card and click ‘properties’
4. The following screen will be displayed. Select the tab ‘ip adress’
The option should be set to ‘obtain an ip automatically’
If you make changes to the configuration, the pc will reboot. In some cases the windows cd-rom is
required to copy files.
Check if the computer recieved a correct ip:
1. Click start – run
2. The following dialog box will be shown:
Type “winipcfg” and hit enter.
3. The following screen will be displayed:
4. Select your networkadapter, not the ppp-adapter or similar.
IP Adress should start with 10.0.0.x
If the ip adress is different, click on ‘refresh’
After a few seconds a correct ip adress will appear.
If there is a problem, this process can take up to 60 seconds to complete.
If the computer fails to obtain an ip address, turn off any firewalls or virusscanners
that could block this action, and retry.
Company
E-Tech
Categories
Fax & Modem & ISDN
Model
E-Tech ADRT03
Description
ADSL Modem router Annex A. Firmware (Uitleg)
Operating System
Firmware
Version
1.0
Size Driver
463KB
File Name
update_procedure.zip
Observations
Table of contents
1.0 Introduction.
2.0 Before you can start with the update procedure.
3.0 The update procedure.
3.1 The background of the configuration page is white and you have an index menu on your left side.
3.2 The background of the configuration page is grey with red and blue bars.
4.0 Re-installing the modem router.
Introduction
You are using an E-Tech ADSL modem router and the software/firmware is a bit too old?
No problem with this step by step firmware update procedure. With this procedure you can easily update your modem router
in a few minutes. Read this manual carefully and don’t stop the procedure when the update is still running.
Multi Pc Modem Firmware Upgrade procedure Pagina 3 van 10
2.0 Before you can start with the update procedure
2.1 Keep your internet provider setting near you as you will need them to re-install your modem router after the update
procedure.
2.2 Remove the phone line from the modem. (The ADSL LED starts to blink).
2.3 Start your internet Explorer and type the following address in the address bar: http://10.0.0.2
2.4 A login screen appears where you have to fill in the usermane and password of the modem router.
The factory default username is: admin and the password is: epicrouter. If this settings are not correct please try the
username: admin and the password: password. If you have changed the login name and password than you have to
enter your own name and password.
3.0 The update procedure
• Is the background of the configuration page white than go to step 3.1.
• Is the background of the configuration page grey with red and blue bars than go with step 3.2.
Multi Pc Modem Firmware Upgrade procedure Pagina 4 van 10
3.1 The background of the configuration page is white and you have an index menu on your left side.
3.1.1 Choose in the left index menu for ‘reset to factory default’ and click on submit to reset your modem router to his
original factory settings.
3.1.2 After the modem is rebooted (ADSL LED is blinking) you can refresh the webpage by pressing the F5 button on your
keyboard. If the webpage does not refresh you can re-enter the modem address in the address bar: http://10.0.0.2
Before you can install the new software you’ll have to check the current software (showtime) version.
3.1.3 Click in the status menu on ‘adsl’.
3.1.4 You will see: Showtime Firmware Version: For example ‘3.14’.
3.1.5 Write this software version on a peace of paper as you will need this number during the further update.
3.1.6 Click in the menu on: ‘Code Image Update’.
3.1.7 Click one time on ‘Image Download’.
3.1.8 Click the Browse button to search the firmware files that you have downloaded. There are two firmware files.
Temp.DLF and Firmware.DLF.
Company
E-Tech
Categories
Fax & Modem & ISDN
Model
E-Tech ADRT03
Description
ADSL Modem router Annex A
Operating System
Firmware (analoog)
Version
3.46 Final
Size Driver
2.9MB
File Name
346_annex_a.zip
Observations
1.0 Introduction.
2.0 Before you can start with the update procedure.
3.0 The update procedure.
3.1 The background of the configuration page is white and you have an index menu on your left side.
3.2 The background of the configuration page is grey with red and blue bars.
4.0 Re-installing the modem router.
Introduction
You are using an E-Tech ADSL modem router and the software/firmware is a bit too old?
No problem with this step by step firmware update procedure. With this procedure you can easily update your modem router
in a few minutes. Read this manual carefully and don’t stop the procedure when the update is still running.
2.0 Before you can start with the update procedure
2.1 Keep your internet provider setting near you as you will need them to re-install your modem router after the update
procedure.
2.2 Remove the phone line from the modem. (The ADSL LED starts to blink).
2.3 Start your internet Explorer and type the following address in the address bar: http://10.0.0.2
2.4 A login screen appears where you have to fill in the usermane and password of the modem router.
The factory default username is: admin and the password is: epicrouter. If this settings are not correct please try the
username: admin and the password: password. If you have changed the login name and password than you have to
enter your own name and password.
3.0 The update procedure
• Is the background of the configuration page white than go to step 3.1.
• Is the background of the configuration page grey with red and blue bars than go with step 3.2.
Multi Pc Modem Firmware Upgrade procedure Pagina 4 van 10
3.1 The background of the configuration page is white and you have an index menu on your left side.
3.1.1 Choose in the left index menu for ‘reset to factory default’ and click on submit to reset your modem router to his
original factory settings.
3.1.2 After the modem is rebooted (ADSL LED is blinking) you can refresh the webpage by pressing the F5 button on your
keyboard. If the webpage does not refresh you can re-enter the modem address in the address bar: http://10.0.0.2
Before you can install the new software you’ll have to check the current software (showtime) version.
3.1.3 Click in the status menu on ‘adsl’.
3.1.4 You will see: Showtime Firmware Version: For example ‘3.14’.
3.1.5 Write this software version on a peace of paper as you will need this number during the further update.
3.1.6 Click in the menu on: ‘Code Image Update’.
3.1.7 Click one time on ‘Image Download’.
3.1.8 Click the Browse button to search the firmware files that you have downloaded. There are two firmware files.
Temp.DLF and Firmware.DLF.
Multi Pc Modem Firmware Upgrade procedure Pagina 5 van 10
3.1.9 Is the current software version less than 3.27 (example: 3.14) than you open the file ‘TEMP.DLF’ and go to step
3.1.10. Is the software version is equal or higher than 3.27 (example 3.36) than go to step 3.1.12.
NOTE: When using the ISDN version of this modem with a firmware version lower than 3.36 you need to
open TEMP.DLF first.
3.1.10 Click on ‘Upload’.
3.1.11 After the upload procedure is finished (File successfully transferred!) you can click again on ‘Code Image Update’
from the menu. If you can’t open this function or the webpage will not appear you can start a new Internet Explorer
page and browse to: http://10.0.0.2/doc/update.htm
If you still can’t enter the configuration page we advise you to shutdown the modem for 30 seconds. After 30
seconds you can retry to open http://10.0.0.2/doc/update.htm
3.1.12 Click the Browse button to search the firmware files you have downloaded.
3.1.13 Open the file ‘Firmware .DLF’.
3.1.14 Click on ‘Upload’.
3.1.15 After a few seconds you will get the message ‘File successfully transferred!’.
3.1.16 After the reboot it is not easy to see if the modem is ready. Therefore we removed the phone line from the modem.
If the power/ready LED’s are on and the ADSL LED is blinking than your modem router is ready.
3.1.17 Close the Internet Explorer.
3.1.18 Open the Internet Explorer again and re-enter the modem address (http://10.0.0.2) in the address bar.
Multi Pc Modem Firmware Upgrade procedure Pagina 6 van 10
3.1.19 If you have opened the configuration page you will see that the page looks a bit different.
3.1.20 You can re-install your modem router with the settings of your internet provider.
3.1.21 Don’t forget to reconnect the phone line to your modem router!
3.2 The background of the configuration page is grey with red and blue bars.
3.2.1 Click on ‘Advanced Setup’.
3.2.2 Click in the index menu on ‘Admin privilege’.
3.2.3 Click ‘reset to factory default’ and click the submit button to reset the modem router to his original factory settings.
3.2.4 After the modem is rebooted (ADSL LED is blinking) you can refresh the webpage by pressing the F5 button on your
keyboard. If the webpage does not refresh you can re-enter the modem address in the address bar: http://10.0.0.2
Company
E-Tech
Categories
Fax & Modem & ISDN
Model
E-Tech ADRT03
Description
ADSL Modem router Annex A
Operating System
Firmware (isdn)
Version
3.46 Final
Size Driver
2.9MB
File Name
346_annex_b.zip
Observations
1.0 Introduction.
2.0 Before you can start with the update procedure.
3.0 The update procedure.
3.1 The background of the configuration page is white and you have an index menu on your left side.
3.2 The background of the configuration page is grey with red and blue bars.
4.0 Re-installing the modem router.
Introduction
You are using an E-Tech ADSL modem router and the software/firmware is a bit too old?
No problem with this step by step firmware update procedure. With this procedure you can easily update your modem router
in a few minutes. Read this manual carefully and don’t stop the procedure when the update is still running.
Multi Pc Modem Firmware Upgrade procedure Pagina 3 van 10
2.0 Before you can start with the update procedure
2.1 Keep your internet provider setting near you as you will need them to re-install your modem router after the update
procedure.
2.2 Remove the phone line from the modem. (The ADSL LED starts to blink).
2.3 Start your internet Explorer and type the following address in the address bar: http://10.0.0.2
2.4 A login screen appears where you have to fill in the usermane and password of the modem router.
The factory default username is: admin and the password is: epicrouter. If this settings are not correct please try the
username: admin and the password: password. If you have changed the login name and password than you have to
enter your own name and password.
3.0 The update procedure
• Is the background of the configuration page white than go to step 3.1.
• Is the background of the configuration page grey with red and blue bars than go with step 3.2.
Multi Pc Modem Firmware Upgrade procedure Pagina 4 van 10
3.1 The background of the configuration page is white and you have an index menu on your left side.
3.1.1 Choose in the left index menu for ‘reset to factory default’ and click on submit to reset your modem router to his
original factory settings.
3.1.2 After the modem is rebooted (ADSL LED is blinking) you can refresh the webpage by pressing the F5 button on your
keyboard. If the webpage does not refresh you can re-enter the modem address in the address bar: http://10.0.0.2
Before you can install the new software you’ll have to check the current software (showtime) version.
3.1.3 Click in the status menu on ‘adsl’.
3.1.4 You will see: Showtime Firmware Version: For example ‘3.14’.
3.1.5 Write this software version on a peace of paper as you will need this number during the further update.
3.1.6 Click in the menu on: ‘Code Image Update’.
3.1.7 Click one time on ‘Image Download’.
3.1.8 Click the Browse button to search the firmware files that you have downloaded. There are two firmware files.
Temp.DLF and Firmware.DLF.
Multi Pc Modem Firmware Upgrade procedure Pagina 5 van 10
3.1.9 Is the current software version less than 3.27 (example: 3.14) than you open the file ‘TEMP.DLF’ and go to step
3.1.10. Is the software version is equal or higher than 3.27 (example 3.36) than go to step 3.1.12.
NOTE: When using the ISDN version of this modem with a firmware version lower than 3.36 you need to
open TEMP.DLF first.
3.1.10 Click on ‘Upload’.
3.1.11 After the upload procedure is finished (File successfully transferred!) you can click again on ‘Code Image Update’
from the menu. If you can’t open this function or the webpage will not appear you can start a new Internet Explorer
page and browse to: http://10.0.0.2/doc/update.htm
If you still can’t enter the configuration page we advise you to shutdown the modem for 30 seconds. After 30
seconds you can retry to open http://10.0.0.2/doc/update.htm
3.1.12 Click the Browse button to search the firmware files you have downloaded.
3.1.13 Open the file ‘Firmware .DLF’.
3.1.14 Click on ‘Upload’.
3.1.15 After a few seconds you will get the message ‘File successfully transferred!’.
3.1.16 After the reboot it is not easy to see if the modem is ready. Therefore we removed the phone line from the modem.
If the power/ready LED’s are on and the ADSL LED is blinking than your modem router is ready.
3.1.17 Close the Internet Explorer.
3.1.18 Open the Internet Explorer again and re-enter the modem address (http://10.0.0.2) in the address bar.
Multi Pc Modem Firmware Upgrade procedure Pagina 6 van 10
3.1.19 If you have opened the configuration page you will see that the page looks a bit different.
3.1.20 You can re-install your modem router with the settings of your internet provider.
3.1.21 Don’t forget to reconnect the phone line to your modem router!
3.2 The background of the configuration page is grey with red and blue bars.
3.2.1 Click on ‘Advanced Setup’.
3.2.2 Click in the index menu on ‘Admin privilege’.
3.2.3 Click ‘reset to factory default’ and click the submit button to reset the modem router to his original factory settings.
3.2.4 After the modem is rebooted (ADSL LED is blinking) you can refresh the webpage by pressing the F5 button on your
keyboard. If the webpage does not refresh you can re-enter the modem address in the address bar: http://10.0.0.2
Company
E-Tech
Categories
Fax & Modem & ISDN
Model
E-Tech ADRT03
Description
ADSL Modem router Annex A
Information
Beveiligingsinstructies
Operating System
Manual
Size Driver
68KB
File Name
secure.pdf
Observations
Instructies voor het wijzigen van het router-wachtwoord, en het beveiligen van uw modem.
Company
E-Tech
Categories
Fax & Modem & ISDN
Model
E-Tech ADRT03
Description
ADSL Modem router Annex A
Information
Firewall Manual
Operating System
Manual
Size Driver
89KB
File Name
firewall_manual.pdf
Observations
Firewall Configuration
A firewall is a method of implementing common as well as user defined security
policies in an effort to keep intruders out. Firewalls work by analyzing and
filtering out IP packets that violate a set of rules defined by the firewall
administrator. The firewall is located at the point of entry for the network. All
data inbound and outbound must pass through the firewall for inspection.
Advanced Options: This section contains options for protecting against
particular wellknown attacks as well as documenting those attacks as they occur.
Firewall Databases: This section allows you to create groups based on IP
addresses, subnet masks, ports, and time. These groups are used when creating
inbound and outbound policies.
Inbound/Outbound Policies: This section allows you to create rules for
incoming and outgoing IP packets. The IP packets are compared against the rules
and are allowed or denied accordingly.
Firewall Enable/Disable: This option enables/disables all the protection
provided on these pages.
1.1 Protection Policy
Protection Policies defend against common methods of attacking a network and
computers within the network. Some of these attacks are classified as a DoS
(Denial of Service). DoS is an attack in which a network or components of a
network are disabled, usually by overloading traffic on the network, in order to
prevent authorized and legitimate users to access network resources.
Basic Protection:
• IP Spoofing checking: IP spoofing is when an unauthorized user inserts the IP
address of an authorized user into the IP packets in order to gain access to a
network. Selecting this option will allow the firewall to check for and filter out this
discrepancy.
• Ping of Death checking: Ping of Death is a type of DoS attack that uses a
malformed ICMP data packet that contains unusually large amounts of data that
causes TCP/IP to crash or behave irregularly. Enabling this will allow the firewall
to filter out packets containing Ping of Death properties.
• Land Attack checking: Land attack is a type of DoS attack that works by
sending a spoofed packet containing the same source and destination IP address
and port (the victim’s IP address). This packet contains a connection request,
resulting in a handshake process. At the end of the handshake, the victim sends
out an ACK (ACKnowledge) request. Since the source and the destination are the
same, the victim receives the ACK request it just sent out. The received data
does not match what the victim is expecting, so it retransmits the ACK request.
This process repeats until the network crashes. Enabling this will allow the firewall
to filter out possible Land Attack packets.
Company
E-Tech
Categories
Fax & Modem & ISDN
Model
E-Tech ADRT03
Description
ADSL Modem router Annex A
Operating System
Handleiding
Version
3.46
Language Driver
Nederlands, uitgebreid
Size Driver
875KB
File Name
adrt03_ned_manual.zip
Observations
Nederlandse Handleiding (nieuwe versie)
Dutch Manual
Access to Official Website E-Tech
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.