Draytek Vigor2200-X-W-E Fax & Modem & ISDN

Company

Draytek

Categories

Fax & Modem & ISDN

Model

Draytek Vigor2200-X-W-E

Description

User Guide for Firmware

Operating System

User Guide

Version

2.3.11

Size Driver

6.1MB

File Name

b64a988d7c501ca4b0075e821a35543020090226050156224538-users-guide.zip

Observations

The term Virtual TA means the local Ethernet-connected hosts or PCs use popular
CAPI-based software such as RVS-COM or BVRP etc. to access the router as a local
ISDN TA for FAX sending or receiving via the ISDN line. Basically, it is a client/server
network model. The Virtual TA server built into the router handles the connection establishment
and release. The Virtual TA client, installed in the Ethernet-connected host, creates
a CAPI-based driver to relay all CAPI messages between applications and the router
CAPI module.
Virtual TA
Note:
1. The Virtual TA client is only supported on MicrosoftTM Windows 95 OSR2.1/
98/98SE/Me/2000/XP platforms.
2. The Virtual TA client only supports the CAPI 2.0 protocol and has no built-in
FAX engine.
3. One ISDN BRI interface only has two B channels.
The maximum number of active clients is also 2.
4. Before you set up the Virtual TA, you must set the correct country code.
Click ISDN Setup in the Basic Setup group.
As the following application chart shows, the Virtual TA client can make an outgoing call or
accept an incoming call to/from a peer FAX machine or ISDN TA etc.

Installing a Virtual TA Client
Note: Not supported on the Vigor2200E model.
Setup a Virtual TA
Quick Setup
> Virtual TA (Remote CAPI) Setup
1. Insert the CD-ROM supplied with your Vigor2200, or directly double-click the installer
file. Vsetup95.exe is for Windows 95 OSR2.1 or higher, Vsetup98.exe is for Windows 98,
98SE and Me, and Vsetup2k.exe is for Windows 2000.
2. Follow on-screen instructions of the installer. The last step requires you to restart your
computer. Click OK to restart.
3. After the computer restarts, you will see a VT icon on the taskbar (usually in the bottomright
of the screen, near the clock) as shown below.
When the icon text is GREEN, the Virtual TA client is connected to the Virtual TA server and
you can launch your CAPI-based software to use the client to access the router. Read your
software user guide for detailed configuration.
If the icon text is RED, it means the client lost the connection with the server. Check the
physical Ethernet connection.

Company

Draytek

Categories

Fax & Modem & ISDN

Model

Draytek Vigor2200-X-W-E

Description

Quick User Guide for Firmware

Operating System

User Guide

Version

2.3.11

Size Driver

1MB

File Name

50bc83b88977fbb9d1a69c26a018c48b2009022605015625067-quick-start-guide.zip

Observations

0. Preface ..................................................................... 0-1
0.1 About This Manual ........................................... 0-2
0.2 Copyright Declarations .................................. 0-2
0.3 Trademarks ........................................................ 0-2
0.4 How To Become A Registered Owner ........ 0-2
0.5 Safety Instructions ........................................... 0-3
0.6 Warranty .............................................................. 0-3
0.7 European Community Declarations ............ 0-4
1. Getting Started .................................................. 1-1
1.1 Introduction .......................................................... 1-2
1.2 Vigor2200 Series Router Comparisons .......... 1-3
1.3 Unpacking Your Vigor2200 Series Router .... 1-4
1.4 LED Indicators & Rear Panels ........................... 1-5
1.5 Key Features ......................................................... 1-12
2. Installation & Setup ......................................... 2-1
2.1 Before you Begin ................................................ 2-2
2.2 Hardware Installation ......................................... 2-4
2.3 Setting up a Management PC ........................... 2-7
2.4 Using the Smart Start Wizard ......................... 2-13
2.5 Using the Web Configurator .......................... 2-18
3. Basic Setup & Internet Access .................. 3-1
3.1 Basic Setup .......................................................... 3-2
3.2 Internet Access Setup ....................................... 3-7
3.3 ISDN Dial-up Internet Access ......................... 3-9
3.4 DSL/Cable Modem Internet Access ............... 3-12
4. Remote Access ................................................... 4-1
4.1 Introduction to Remote Access ........................ 4-3
4.2 Remote Dial-in Access ........................................ 4-3
4.3 LAN-to-LAN Access ............................................. 4-8

Access to Official Website Draytek

Home English Drivers English Drivers German

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 4 files for Draytek Vigor2200-X-W-E

Select Files