Available 3 files for Diamond SupraExpress 56i Pro

Company

Diamond

Categories

Fax & Modem & ISDN

Model

Diamond SupraExpress 56i Pro

Description

Drivers

Operating System

Windows 2000

Size Driver

344KB

File Name

2000.zip

Observations

Windows 2000 drivers for SupraExpress 56e V.90 ACF2 modem, SUP2730

Instructions for new installation of drivers:

1) With the computer off, install the modem to the serial port on back of computer, plug power supply into wall and into back of modem.
2) Boot the system. Windows will not indicate that the modem was installed, but a "56K Data Fax Modem PnP" will be installed.
3) Go to Start > Settings > Control Panels. Double-click on System, click on the Hardware tab, and click on Device Manager.
4) Click on the + in front of Modems, right-click on the modem and go to Properties.
5) On the Driver tab, click Update Driver. The Update Device Driver Wizard will begin.
6) Choose to "Display a list of known drivers" as opposed to "Search for a suitable driver."
7) Point the procedure to the location on your hard drive or floppy disk where you extracted the drivers. You will need to click "Have Disk" and and type in the path to the drivers.
8) Pick the "SupraExpress 56e V.90 SUP2730" from the list. Windows will install drivers for this modem.

Testing the Installation:

1) Go to Start > Settings > Control Panels. Double-click on System, click on the Hardware tab, and click on Device Manager.
2) Click on the + in front of Modems, right-click on the modem and go to Properties.
3) On the Diagnostics tab, click the Query Modem button. After a few seconds, The ATI commands should contain information, including an ATI3 response of 3.210-03, the firmware revision for this modem.

Company

Diamond

Categories

Fax & Modem & ISDN

Model

Diamond SupraExpress 56i Pro

Description

Drivers

Operating System

Windows 95-98

Size Driver

728KB

File Name

95-98.zip

Observations

SupraMax 56 ISA Series Windows 9X driver files
===========================
Applicable files
-----------------
Drivers V2.04:
supramax_56i_isa-9x_2300_204-driver.exe

Release Notes
-----------------
These drivers are provided for those who might have lost their original
disks or received a modem before certain Microsoft functionality was
available. If your modem is working correctly with your system, there
is no reason to install new INF files.

Installation Instructions
-----------------
You should print this document for easy reference.

There are two possible paths for installing these files on your computer.
The first path is for those who have not installed any drivers for thier
modem. The second is for those who have already installed driver files for
their modem.

Installation Process 1:
-----------------
For those who have installed no driver files:

1. Label a blank formatted floppy disk, "SupraMax 56 Driver files."

2. Insert the disk into the floppy drive.

3. Download the file onto a floppy disk. In your browser, click on the file
name, supramax_56i_isa-9x_2300_204-driver.exe. Your browser should prompt as
to where you would like save the file. You should select the floppy drive, "a:\"
(without the quotes).

4. When the download is complete, you should disconnect from the internet and
close all open programs.

5. You should then need to extract the files from the downloaded file. Click
Start\Run\Browse. Locate the supramax_56i_isa-9x_2300_204-driver.exe file on
the floppy drive, "a:." Click OK and then OK again.

6. A Self-Extractor window should appear. "C:\WINDOWS\TEMP" should appear in
the Unzip To Folder window. This is the default location. You should change this
to "a:" (without the quotes). Click on the Unzip button.

7. After the files have been extracted click OK to the "success" window and then
Close to exit the extractor program.

At this point the files have been extracted and are ready for use to install.
You should be able to install your modem in the manner described in the installation
guide that accompanied the modem. When prompted for a driver disk, use the disk you
just created.

Installation Process 2:
-----------------
For those with previously installed driver files:

1. Download the file onto a floppy disk. In your browser, click on the
file name, supramax_56i_isa-9x_2300_204-driver.exe. Your browser should prompt as
to where you would like save the file. You should note the location (i.e. c:\windows\temp,
a:\, etc).

2. When the download is complete, you should disconnect from the internet and close all
open programs.

3. You should then need to extract the files from the downloaded file. Click Start\Run\Browse.
Locate the supramax_56i_isa-9x_2300_204-driver.exe file. It should be in the noted location
from step 1 above. Click OK and then OK again.

Company

Diamond

Categories

Fax & Modem & ISDN

Model

Diamond SupraExpress 56i Pro

Description

Drivers

Operating System

Windows NT

Size Driver

584KB

File Name

nt.zip

Observations

SupraMax 56 PCI Series Windows NT driver files
=========================
Applicable files
-----------------

Drivers V2.1.2.136b (for SUP2260 modems):

supramax_56i_pci-nt_2260_136b-driver.exe

Drivers V2.1.2.136.001 (for SUP2370 modems):

supramax_56i_pci-nt_2370_1361-driver.exe

Drivers V2.1.2.154 (for SUP2350 modems):

supramax_56i_pci-nt_2260_136b-driver.exe

Drivers V2.1.2.156 (for SUP2750 modems):

supramax_56i_voice_monopack-nt_2750_156_9-driver.exe

It is highly recommended that you specifically identify your modem in order to
determine the appropriate drivers as each is specific to its model. You can use the
following chart to determine which modem you have based on its part number:

Model Part Number
---------------------
SUP2260: 23540020-003
SUP2370: 23540012-001
SUP2350: 23643012-002
SUP2750: 23680001-001

In most cases, you can ignore the last three digits of the part number as they represent minor board
revisions.

Release Notes
-----------------
These drivers are provided for those who might have lost their original
disks or received a modem before certain Microsoft functionality was available.
If your modem is working correctly with your system, there is no reason to
install new driver files.

Installation Instructions
-----------------
You should print this document for easy reference.

1. Download the file onto your hard disk or floppy disk. In your browser, click on the
appropriate file name. Your browser should prompt as to where you would like
save the file. You should note the location (i.e. c:\windows\temp, a:\, etc).

2. When the download is complete, you should disconnect from the internet and close all open
programs.

3. You should then need to extract the files from the downloaded file. Click Start\Run\Browse.
Locate the appropriate file. It should be in the noted location from step 1 above.
Click OK and then OK again. Click OK to the initial extractor window.

4. A Self-Extractor window should appear. "C:\TEMP" should appear in the Unzip To
Folder window. This is the default location. If you want to change this, enter the appropriate
location. For most purposes it should not be necessary to change this. Uncheck the box to Run Setup.
Click on the Unzip button.

5. After the files have been extracted click OK to the "success" window and then Close to exit
the extractor program. At this point the files have been extracted and you should be able to install the modem.

WARNING: Do NOT attempt to manually add this modem. This is a software modem and requires that you run
the appropriate setup file in order to install. Attempting to manually add the modem may result in the need to reinstall the operating system.

NOTE: You must ensure that you are logged in as Adminstrator only. It is not sufficient
to be logged in with adminstrative priveledges.