Available 5 files for D-Link DSL-504 Revision Ax
Select Files
Company
D-Link
Categories
Fax & Modem & ISDN
Model
D-Link DSL-504 Revision Ax
Description
4-Port ADSL Router Firmware
Operating System
Firmware
Version
202b2t8uk
Size Driver
2.2MB
File Name
dsl-504_fw_v202b2t8uk.zip
Company
D-Link
Categories
Fax & Modem & ISDN
Model
D-Link DSL-504 Revision Ax
Description
4-Port ADSL Router Firmware
Operating System
Firmware
Version
221b15
Size Driver
2.4MB
File Name
dsl-504_rev_a_fw_v221b15.zip
Company
D-Link
Categories
Fax & Modem & ISDN
Model
D-Link DSL-504 Revision Ax
Description
4-Port ADSL Router Quick Installation Guide
Information
Quick Installation Guide
Operating System
Manual
Size Driver
583KB
File Name
dsl-504_install_guidefwv2.pdf
Observations
DSL-504 ADSL Router Installation Guide
Firmware version: V 2.0x
OS Supported: Supports all major OS, requires TCP/IP
Installation
The DSL-504 is an ADSL router with built in 4-port 10/100Mbps Switch.
This set-up is applicable to all operating systems that have a JAVA enabled web
browser.
The unit has a factory default IP address of 192.168.0.1 so please ensure there is no
device on the same network using this IP address when you configure the unit for
the first time. After configuration you can change the IP address if need be.
In the United Kingdom, the main implementation of ADSL is using the RFC-2364
which is PPPoA. This guide assumes that you have this type of connection. Check
with your service provider if you are unsure.
Win9x:
Go to Start | Run, enter WINIPCFG
Select the Network Card from the Drop-Down menu;
Click 'More Info';
Click 'Release';
Click 'Renew';
Observe the following parameters which should have been obtained:
IP Address: 192.168.0.x ( 'x' probably =2 )
Subnet Mask: 255.255.255.0
Default
Gateway:
192.168.0.1
DHCP Server: 192.168.0.1
DNS Servers:
As per router's DHCP page, eg:
192.168.0.1 and 213.120.62.100
Windows 2000 / XP:
There is no winipcfg in Windows 2000 / XP.
Go to a command prompt and issue the commands:
ipconfig /release
ipconfig /renew
ipconfig /all
The final command will display all the current IP configuration.
Observe the following parameters which should have been obtained:
IP Address: 192.168.0.x ( 'x' probably =2 )
Subnet Mask: 255.255.255.0
Default
Gateway:
192.168.0.1
DHCP Server: 192.168.0.1
DNS Servers:
As per router's DHCP page, eg:
192.168.0.1 and 213.120.62.100
Company
D-Link
Categories
Fax & Modem & ISDN
Model
D-Link DSL-504 Revision Ax
Description
4-Port ADSL Router Manual
Operating System
Manual
Size Driver
1.6MB
File Name
dsl-504_man_r221.zip
Observations
ABOUT THIS USER’S GUIDE.................................................................................VII
Guide Overview...........................................................................................................................................vii
Before You Start..............................................................................................................................................vii
Requirements...................................................................................................................................................vii
Web Browser...............................................................................................................................................viii
Ethernet Port (NIC Adapter).......................................................................................................................viii
About Bridged Ethernet Connections (RFC 1483)......................................................................................viii
About IPoA Connections (RFC 1577)...........................................................................................................ix
Additional PVC Settings...............................................................................................................................ix
Packing List.........................................................................................................................................................ix
INTRODUCTION........................................................................................................1
What is ADSL?..............................................................................................................................................1
Router Description and Operation......................................................................................................................1
Router Features....................................................................................................................................................2
Front Panel Display and LED Indicators............................................................................................................3
Rear Panel Cable Connections...........................................................................................................................4
HARDWARE INSTALLATION...................................................................................5
Connect ADSL Line...........................................................................................................................................5
Connect Router to the Ethernet..........................................................................................................................5
Computer to Router Connection.....................................................................................................................5
Switch to Router Connection.........................................................................................................................5
Power On Router................................................................................................................................................6
CONFIGURING THE ROUTER FOR THE FIRST TIME............................................7
Configuring IP Settings on Your Computer........................................................................................................7
Access the Configuration Manager..................................................................................................................14
Configure the Router........................................................................................................................................15
WEB-BASED MANAGEMENT.................................................................................17
Accessing the Web Manager............................................................................................................................17
Folders and Menus.......................................................................................................................................18
Router Configuration........................................................................................................................................18
Configuring the WAN Connection...................................................................................................................19
Additional Virtual Connections (PVCs)...........................................................................................................21
Configuring LAN IP Settings...........................................................................................................................23
Company
D-Link
Categories
Fax & Modem & ISDN
Model
D-Link DSL-504 Revision Ax
Description
4-Port ADSL Router No NAT configuration guide
Information
Manual
Operating System
Manual
Size Driver
784KB
File Name
dsl-504_no_nat_config.pdf
Observations
DSL-500/DSL-504 Installation guide for NO-NAT.
The following set-up procedure shows how to configure the DSL-500/504 for a NO
NAT set-up. This only applies if you have a range of usable IP addresses from
your ISP. Please note that this document requires that the latest firmware is
running on the ADSL router. This is v2.21…t18uk.
1) Please ensure that the RJ-11 cable is not connected to the ADSL enabled line.
2) Go into the routers configuration using the default IP address of 192.168.0.1
and login using the default username and password (admin/admin) and do a
Factory Reset. Once done, login again.
3) Go into Maintenance--> Remote Administration Access and set it to Yes. Click
OK.
4) Go into the Configuration--> Multiple PVC Configuration. Set the Index to 1.
Set the ‘Enscapsulation’ to ‘PPPoA VC mux’. Enter the ISP username and
password. Under IP control, set this to PPP UNNUMBERED. Click on Modify
and click on Apply. Select 'Continue and do Save changes later'. Click OK.
5) Go in NAT Configuration and set the NAT Function to Disabled. Click OK and
select 'Continue and do Save changes later'. Click OK.
6) Go into the Ethernet IP address and set the IP address of the router to the
one designated for the router out of your public IP range. Set the subnet
mask to the appropriate one. Note: These details will have been provided by
your ISP. When asked to set then adjust the DHCP range, click YES and then
Click OK to reboot when prompted.
Note: If you would like to disable the DHCP function of the DSL-500/504, you
can do this going back into the unit after it has rebooted.
7) Go into the configuration of the DSL-504 by typing in using the newly
assigned IP address.
8) Connect the RJ-11 cable to the ADSL-enabled line through the microfilter.
Access to Official Website D-Link
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.