Available 5 files for Creatix CTX603
Select Files
Company
Creatix
Categories
Fax & Modem & ISDN
Model
Creatix CTX603
Description
Installation instruction under SuSE 9.1 and 9.2
Information
Manual PDF
Operating System
Manual
Size Driver
89KB
File Name
inst-603-suse91-92_gb.pdf
Observations
Installation of the modem 537ep (ctx603) under SuSE 9.1 and 9.2 (Kernel 2.6.)
Requirements:
- driver for the modem 537ep for Kernel 2.6 (Version 2.60.80.0.or higher). Look at
http://linmodems.technion.ac.il/resources.html for downloading.
- Install the package kernel-source (adequate to your kernel version), gcc and make
- Install the package minicom for testing the modem
- Log in as root
Installation:
1. The modem is recognized as Creatix modem. Do not configure.
2. Copy the driver intel-537-****.tgz into the directory /usr/src.
3. Go into this directory /usr/src
4. Unzipped the driver with the command tar – xzvf intel-537***.tgz
5. This will create the a new directory called intel-537EP_secure-*****0
6. Change into this directory.
7. Set the commands
make clean
make 537
make install
If you get the error “make command not found” install the kernel-sources!
8. Now you can find the device 537ep at /dev. The driver also creates a link from /dev/modem to
/dev/537ep for using KPPP.
Configuration:
1. MINICOM:
minicom is not a package of the standard installation and has to be installed additional. Start
the program with the command minicom –s. With the arrow keys and the return taste go to
“serial port setup” and change the entry for A into /dev/modem and for E into 115200 8 n 1 .
Change these settings with “save setup as dfl” and click on “exit”. Now the terminal program is
starting and you can communicate with modem with at commands. Check the country settings
with ATI12 and change it with the command AT+GCI=xx (xx= B4 for UK, 7B for the
Netherlands, 3D for France, B5 for USA).
0A AUT (43) Österreich – Austria
31 DNK (45) Dänemark – Denmark
3D FRA (33) Frankreich – France
04 DEU (49) Deutschland – Germany
7B NLD (31) Niederlande – The Netherlands
A6 CHE (41) Schweiz – Suisse
B4 GBR (44) Großbritanien – United Kingdom
B5 USA
Now try to make a connection with the command ATDT[phone number of a provider][enter].
2. Kinternet/wvdial connection:
Configure the modem with YAST. It is important to choose “others (not recognized)”
because otherwise SuSE wants to install the wrong package. Configure this entry “others” with
the baud rate 115200 and the Init1 AT&F. Then configure your provider. Now the Internet
connection should function.
Company
Creatix
Categories
Fax & Modem & ISDN
Model
Creatix CTX603
Description
Installation instruction under Mandrake 10
Information
Manual PDF
Operating System
Manual
Size Driver
95KB
File Name
inst-603-mandrake10_gb.pdf
Observations
Installation of the modem 537ep (ctx 603) under Mandrake 10.0
Requirements:
- driver for the modem 537ep (version 2.60.80.0). Look at
http://linmodems.technion.ac.il/resources.html for downloading.
- Login as root and work with console
- You have to install the packages kernel-source (adequate to your kernel
version) and kdenetwork-kppp-3.1.3-37mdk for KPPP
- Modem is recognized as Creatix modem ? do not configure!
Installation:
1. Copy the driver intel-537****.tgz into the directory /usr/src.
2. Go into this directory /usr/src
3. Unzipped the driver with the command tar – intel-537****.tgz
4. This will create the a new directory called intel-537EP_secure-2.60.80.0
5. Change into this directory.
6. Set the commands
make clean
make 537
make install
If you get the error “make command not found” install the kernel-sources!
7. Now you can find the device 537 at /dev. The driver also creates a link from
/dev/modem to /dev/537 for using KPPP.
Configuration:
1. MINICOM:
minicom is not a package of the standard installation and has to be installed
additional. Start the program with the command minicom –s. With the arrow
keys and the return taste go to “serial port setup” and change the entry for A
into /dev/modem and for E into 115200 8 n 1 . Change these settings with
“save setup as dfl” and click on “exit”. Now the terminal program is starting and
you can communicate with modem with at commands. Check the country
settings with ATI12 and change it with the command AT+GCI=xx (xx= B4 for
UK, 7B for the Netherlands, 3D for France, B5 for USA).
0A AUT (43) Österreich – Austria
31 DNK (45) Dänemark – Denmark
3D FRA (33) Frankreich – France
04 DEU (49) Deutschland – Germany
7B NLD (31) Niederlande – The Netherlands
A6 CHE (41) Schweiz – Suisse
B4 GBR (44) Großbritanien – United Kingdom
B5 USA
Now try to make a connection with the command ATDT[phone number of a
provider][enter].
2. KPPP connection:
to configure a KPPP connection look at your distribution manual. Check the
modem init. It should be AT&F.
Company
Creatix
Categories
Fax & Modem & ISDN
Model
Creatix CTX603
Description
Installation instruction under Mandriva 2006
Information
Manual PDF
Operating System
Manual
Size Driver
85KB
File Name
inst-603-mandriva2006_gb.pdf
Observations
Installation of the modem 537ep (ctx 603) under Mandriva2006
Requirements:
- driver for the modem 537ep (version 2.70.95.0) of Intel. Look at
http://developer.intel.com/design/modems/support/drivers.htm for downloading.
- Login as root and work with console
- You have to install the packages kernel-source (adequate to your kernel
version) and kdenetwork-kppp for KPPP
Installation:
1. Copy the driver intel-537****.tgz into the directory /usr/src.
2. Go into this directory /usr/src
3. Unzipped the driver with the command tar – intel-537****.tgz
4. This will create the a new directory called intel-537EP****
5. Change into this directory.
6. Set the commands
make clean
make 537
make install
If you get the error “make command not found” install the kernel-sources!
7. Now you can find the device 537 at /dev. The driver also creates a link from
/dev/modem to /dev/537 for using KPPP.
Configuration:
1. MINICOM:
minicom is not a package of the standard installation and has to be installed
additional. Start the program with the command minicom –s. With the arrow
keys and the return taste go to “serial port setup” and change the entry for A
into /dev/modem and for E into 115200 8 n 1 . Change these settings with
“save setup as dfl” and click on “exit”. Now the terminal program is starting and
you can communicate with modem with at commands. Check the country
settings with ATI12 and change it with the command AT+GCI=xx (xx= B4 for
UK, 7B for the Netherlands, 3D for France, B5 for USA).
0A AUT (43) Österreich – Austria
31 DNK (45) Dänemark – Denmark
3D FRA (33) Frankreich – France
04 DEU (49) Deutschland – Germany
7B NLD (31) Niederlande – The Netherlands
A6 CHE (41) Schweiz – Suisse
B4 GBR (44) Großbritanien – United Kingdom
B5 USA
Now try to make a connection with the command ATDT[phone number of a
provider][enter].
2. KPPP connection:
to configure a KPPP connection look at your distribution manual. Check the
modem init. It should be AT&F.
Company
Creatix
Categories
Fax & Modem & ISDN
Model
Creatix CTX603
Description
Driver Installation instruction included.
Operating System
Windows ME
Size Driver
822KB
File Name
603-2165831-me.zip
Company
Creatix
Categories
Fax & Modem & ISDN
Model
Creatix CTX603
Description
Driver Installation instruction included.
Operating System
Windows XP
Size Driver
749KB
File Name
603-2184106-xp.zip
Observations
Installation V9x Data Fax Modem(603) under Windows XP
Installation Instructions
The driver can only be installed, if the PCI-Card is recognized as a new hardware, do not update existing drivers with the instruction “Update driver”. Existing drivers has to be de-installed. De-install the device at the device manager (Control panel – System). If there is a new operating system and no driver installed, the card should be detected automatically at the device manager (Control panel – System) under “Others / unknown components /devices” as “PCI Modem”.
Installation under Windows XP
1. Unpack the driver (Disc, CD or Internet) into a temporary directory.
2. After installing the card and rebooting the PC, the card should be recognized as a new hardware -> PCI Modem and the hardware assistant will be started.
3. Choose “Install software from a list or from another source” (advanced user) and activate “Search for the best driver”.
4. At the point “Search also the following sources”, declare the directory in which you have unpacked the driver at the beginning.
5. You should find “Creatix V.9X Data Fax Modem”. Finish the hardware assistant after copying the files with “Finish”.
6.
The modem should be available at the control panel under “Telephone- and Modem options” (printer and other hardware).
Uninstallation under Winsow XP
To uninstall the modem go to Control Panel – Software. Activate the entry Creatix V9x DSP Data Fax Modem and click on Add/Delete. Click on JA/YES at the question if you want to uninstall the modem. The next message confirm with OK. Now you get shown the entry of the modem at Control Panel – Modems. Click on Delete and then on YES for uninstall the modem.
Access to Official Website Creatix
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.