Available 5 files for Cnet CNAD-800IF

Company

Cnet

Categories

Fax & Modem & ISDN

Model

Cnet CNAD-800IF

Description

ADSL Router

Operating System

Installation Guide

Size Driver

1.1MB

File Name

if_manual.zip

Observations

Contents
1. Introduction to ADSL – PCI Modem…………………3
2. Package Contents ………………………………………4
3. Hardware Installation………………………………......5
4. Network Settings………………………………………22
5. Editing Your Service Connection…………………...47
6. All driver Issue in PPPoE………………………….....49
7. Diagnostic Tool………………………………………...51
8. Trouble shooting………………………………………55

1. Introduction
Asymmetric Digital Subscriber Line (ADSL) PCI modem card, which
conveniently plugs into computer system. The modem connects
directly to your telephone line via a standard connector.
It is automatically detect the line standard and set up the speed. The
Plug & Play support makes the installation process easy and fast with
an friendly software interface run on the client allows a user to
configure the necessary settings without any difficulty. It is high speed
and the best performance solutions for every surfing on the Internet.
1.1 Features:
?? Data Modem:
--Line speed: G. dmt 8.0Mbps/1Mbps (Downstream/Upstream)
G. Lite 1.5Mbps/512Kbps (Downstream/Upstream)
Standard compatibility: ANSI T1.413i2;G. Dmt (ITU G.992.1);
G. lite (ITU G.992.2)
PPP over ATM (RFC 2364)
Routed IP over ATM/Ethernet over ATM (RFC 1483)
Classic IP (RFC 1577)
Hardware interface: Compliant with PCI 2.1
Power requirement: PCI bus+5V and3.3V
System requirement : Win95 / 98 / ME / 2000 / NT4.0 / XP/ Linux ;
CD-ROM

Company

Cnet

Categories

Fax & Modem & ISDN

Model

Cnet CNAD-800IF

Description

ADSL Router

Operating System

Linux 2.4.12 kernel

Size Driver

3.3MB

File Name

if_linux2.zip

Observations

1. Driver Introduction
This guide describes the details for installing and configuring the ITeX ADSL/ATM driver to
support Linux systems. RFC 2516 PPP over Ethernet support for Linux Kernel 2.4.12 is
described in this guide. For other protocols refer to the corresponding user guide provided by
ITeX.
ITeX Apollo 3 ADSL PCI modem is modeled as a Linux ATM card. It comes with a fully
functional ATM/ADSL driver, which is distributed as a binary-only application. This allows the
support of a wide range of protocols like RFC 2684, Classic IP over ATM, PPPoA and PPPoE
without trouble of maintaining source code. Currently ITeX ATM driver does not support Linux
Hotplugging package.
ITeX driver version supported:
2.2.7.ITEXPC86.0006

2 PPP over Ethernet
2.1 Downloading
General
You will need to download several packages before start:
• RedHat Linux OS Release 7.1.
• ITeX ATM/ADSL driver for Apollo 3 card (itex1577-2.4.12.o).
• Linux ATM driver version 0.78 or later (atm-0.78.tar.gz).
• Linux kernel 2.4.12
A number of these you will have to patch and/or compile yourself.
* Warning: PPPoA and PPPoE cannot be supported simultaneously in one kernel at this
moment. See the “Patching the kernel” section for details. Strongly recommend to re-compile
the application packages every time you rebuild and load the new kernel.
If your provider uses PPPoE, you will need:
• Linux kernel 2.4.12.
1. Linux-2.4.12.tar.gz
• PPPoE aware PPP daemon.
1. ppp-2.4.1-pppoe2.tgz
2. libpppoe.c
* Note: The default PPP package won’t work. A server tag error will
be received every time PPPoE client dials into the server. This
issue happens with the packet verification function of libpppoe.c
file in PPPoE module. Replacing this file with ITeX ones will solve
this bug.
• RFC2684 Bridging kernel patch and configuration utility

Company

Cnet

Categories

Fax & Modem & ISDN

Model

Cnet CNAD-800IF

Description

ADSL Router

Operating System

Linux 2.4.16 kernel

Size Driver

32.1MB

File Name

if_linux3.zip

Observations

Driver Introduction
The ITeX Apollo 3 ADSL PCI modem is modeled as a Linux ATM card. It comes with a
fully functional ATM/ADSL driver, which is distributed as a binary-only application.
This allows its use for a wide range of protocols.
This guide describes the procedure to install and setup the Apollo 3 ADSL modem with
the Linux operating system. It is written to support the Red Hat 7.2 (kernel 2.4.16)
version of the operating system. Also included in this user’s guide are the procedures to
install and setup various client applications, specifically RFC2648, RFC2364 (PPPoA)
and RFC2516 (PPPoE).
ITeX Linux driver version for this manual: 2.2.7.ITEXPC86.0006.

2 Requirements
The following are packages or files provided in the installation CD from
ITeX.
• ITeX ATM/ADSL driver for Apollo 3 card (itex1577-2.4.16.o).
• Linux ATM driver version 0.78 (atm-0.78.tar.gz).
• PPPoE/PPPoA aware PPP daemon.
itexpppoe_for_2.4.16.tar.gz
itexpppoa_for_2.4.16.tar.gz
• PPP over ATM vs. br2684 kernel patch
br2684-against2.4.17.diff
• User space utility
brctl-010226.c
• Modified header files from ITeX
atm.h
atmdev.h
atmppp.h

3 Building the Kernel
3.1 Untar the new kernel linux-2.4.16 under the directory /usr/src
tar xzvf linux-2.4.16.tar.gz
3.2 Change the directory to /usr/src/linux to apply the kernel patch:
patch –p1 –s –E < br2684-against2.4.17.diff
3.3 Configuring the Kernel
make menuconfig
Also set the following options:
• Code Maturity Level Options
- Prompt for development and/or incomplete code/drivers [Y]
• Networking Options
- Packet Socket [Y]
- Packet Socket: mmapped IO [Y]
- Asynchronous Transfer Mode (ATM) (EXPERIMENTAL) [Y]
- RFC 1483/2684 Bridged protocols [Y]
• Network Device Support
- PPP (Point-to-Point Protocol) Support [Y]
- PPP Deflate Compression [Y]
- PPP Over Ethernet (EXPERIMENTAL) [Y]
- PPP Over ATM (EXPERIMENTAL) [Y]

Company

Cnet

Categories

Fax & Modem & ISDN

Model

Cnet CNAD-800IF

Description

ADSL Router Support PPPoA protocol

Operating System

Windows

Size Driver

4.7MB

File Name

if_pppoa.zip

Company

Cnet

Categories

Fax & Modem & ISDN

Model

Cnet CNAD-800IF

Description

ADSL Router Support PPPoE protocol

Operating System

Windows

Size Driver

4.7MB

File Name

if_pppoe.zip