Installing the FMHCF56I Conexant Windows 2000 Modem Driver
1. Start Windows 2000 with the modem installed into one of the computer’s PCI slots.
2. Windows should detect the PCI Simple Communications Controller.
3. Click on the Next button when presented with the first screen.
4. Ensure Search for a suitable driver for my device (recommended) is selected and then click on the Next button:
5. Ensure that Specify a location is selected and click on the Next button.
6a. Select the drive and directory or
6b. Click the Browse button to browse your computer for the location of the drivers. Once you find the correct drive and directory containing the drivers, click on the Open button.
7. After selecting the correct location of the drivers, click on the OK button.
8. Click on the Next button whick will display a screen informing you of the status of the Drivers Digital signature. Note: If the drivers provided contain a Microsoft digital signature you will not be presented with this screen. As the time of this writing, the drivers do not contain a Microsoft digital signature, but have been tested and operate correctly.
9. Click on the Yes button to start the driver installation.
10. Click on the Finish button to complete the modem driver installation. After clicking on Finish a Modem Audio device will be detected and installed automatically.
Description
PCI Host Updated
Operating System
Windows 95-98
Version
VER.2.1.2.164.005
Size Driver
780Kb
File Name
am56win98hcfwithorwospv212164005.exe
Observations
Windows 95/98 Driver for Zoltrix Modem model FMHCF56i -------------------------------------------------- Quick Instructions-
Uninstalling the Modem driver - This new driver now has Rockwell's new name of Conexant to replace the Rockwell name in previous drivers.
Start the Control Panel => Add/Remove Programs Select Rockwell HCF 56K Modem or Conexant HCF 56K Modem and click on the Add/Remove button to remove the modem driver. Then restart Windows to reload the new driver.
Installing the new driver
When the new hardware is found by Win95, insert the driver disk and select the correct drive and path to the driver and follow the onscreen directions.
Refer to the online manual found on the modem drivers page for detailed instructions.
Description
PCI Host
Operating System
Windows NT4
Version
VER. 2.1.2.135
Size Driver
885Kb
File Name
am56winnthcf-aorhcfnospv3156012.exe
Observations
Window NT Installation for all HCF-A series modems.
1.Extract the driver file to a formatetd floppy.(make sure it is set to read/write) 2.Run the Install.bat file from the floppy disk in either windows or dos. 3.This will force an autodetect to load the current driver. If the files are on a write protected disk the installation will not work.
