Available 2 files for Dexxa TrackbAll Mouse-Joystick
Select Files
Company
Dexxa
Categories
joysticks
Model
Dexxa TrackbAll Mouse-Joystick
Description
TrackbAll
Operating System
MS-Dos
Version
1.00
Size Driver
1MB
File Name
dr_904317_en.zip
Observations
Dexxa Trackball User's Manual
Note: This equipment has been tested and found to comply with the limits for
a CLASS B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and if not installed
and used in accordance with the instruction manual may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. if this
equipment does cause interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
* Consult the dealer or an experienced radio TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference.
(2) this device must accept any interference received, including
interference that may cause undesired operation.
1. Hardware Installation - Installing a Dexxa Combo Trackball
Dexxa Combo Trackball comes with a PS/2 (DIN 6) cable connector, together with
a PS/2 -> Serial (COM 9) port adapter.
Before plug Dexxa Trackball into the computer, try to make sure what kind of Computer
port you have. If you have a PS/2 port, plug in the original PS/2
cable connector; if you have a Serial port, please connect the adapter
first to the cable, then plug into the Serial port.
1. Turn the computer off.
2. Locate an available 6-pin round port on your computer.
3. Insert Dexxa Trackball connector into the round port.
4. Start your computer.
2. Dos Driver Installation
1. Insert Dexxa Trackball driver diskette in Drive A (or B). Type the following
:
A:
2. On the diskette are files required for the correct installation of the
software. Type the following :
DOSINST
Follow the on-screen instructions properly.
Company
Dexxa
Categories
joysticks
Model
Dexxa TrackbAll Mouse-Joystick
Description
Drivers
Operating System
Windows 3.1-95-98-98Se-NT4
Size Driver
1MB
File Name
dr_904317_en.zip
Observations
Dexxa Trackball User's Manual
Note: This equipment has been tested and found to comply with the limits for
a CLASS B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and if not installed
and used in accordance with the instruction manual may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. if this
equipment does cause interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
* Consult the dealer or an experienced radio TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference.
(2) this device must accept any interference received, including
interference that may cause undesired operation.
1. Hardware Installation - Installing a Dexxa Combo Trackball
Dexxa Combo Trackball comes with a PS/2 (DIN 6) cable connector, together with
a PS/2 -> Serial (COM 9) port adapter.
Before plug Dexxa Trackball into the computer, try to make sure what kind of Computer
port you have. If you have a PS/2 port, plug in the original PS/2
cable connector; if you have a Serial port, please connect the adapter
first to the cable, then plug into the Serial port.
1. Turn the computer off.
2. Locate an available 6-pin round port on your computer.
3. Insert Dexxa Trackball connector into the round port.
4. Start your computer.
2. Dos Driver Installation
1. Insert Dexxa Trackball driver diskette in Drive A (or B). Type the following
:
A:
2. On the diskette are files required for the correct installation of the
software. Type the following :
DOSINST
Follow the on-screen instructions properly.
Access to Official Website Dexxa
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.