Available 4 files for LSI MegaRaid Ide 100
Select Files
Company
LSI
Categories
HD Controller & Removable drive
Model
LSI MegaRaid Ide 100
Description
Drivers
Operating System
Windows 2000
Version
4.1.0709.2003
Size Driver
265KB
File Name
lsi_gen_4.1.0709.2003.zip
Observations
Contents on the disk
====================
README TXT This readme file
MEGAIDE Microsoft Windows miniport disk label file
TXTSETUP OEM Microsoft Windows miniport text mode setup file
Serv2003
MEGAIDE SYS Microsoft Windows Server 2003 miniport driver
MEGAIDE INF Microsoft Windows Server 2003 setup file
WIN2K
MEGAIDE SYS Microsoft Windows2000 miniport driver
MEGAIDE INF Microsoft Windows miniport setup file
WINNT
MEGAIDE SYS Microsoft Windows NT 4.0 miniport driver
MEGAIDE INF Microsoft Windows miniport setup file
WINXP
MEGAIDE SYS Microsoft Windows XP miniport driver
MEGAIDE INF Microsoft Windows miniport setup file
================
Software Version
================
Microsoft WindowsNT miniport driver 4.1.0709.2003
Microsoft Windows 2000 miniport driver 4.1.0709.2003
Microsoft Server 2003 miniport driver 4.1.0709.2003
Microsoft Windows XP miniport driver 4.1.0709.2003
==========
What's New
==========
Driver Version 4.1.0709.2003
- DMA Bus Master Data Integrity -- LSI found a rare operating condition with the MegaRAID IDE 100 and MegaRAID
ATA 133 controllers where an interrupt to the IDE device stops a write data operation before it is complete
and potentially discards the data rather than writing it to system memory. This issue was fixed by modifying
the driver to ignore a scenario where an interrupt on the bus master status register and the DMA-Active
bit is also set, and postpones interrupt handling. This sequence continues until the data transfers are
cleared. This prevents the abort of the DMA, thus maintaining data integrity.
Driver Version 4.1.0626.2003
- Stripe size reported to application is fixed.
- The Write verify command was not getting completed in Reset bus if the Drive power is pulled.
- Inode Fix is incorporated for all the controllers.
Driver version 4.1.0426.2003
- Fastidefirecommand Modified for better performance.
- Base Class and Sub Class Code check added in driver.
Driver version 4.1.0412.2003
- The Reset bus seen on RAID 10 configuration is fixed.
- Low performance seen on the Disk Transfer Rate test is fixed.
Driver version 4.1.0313.2003
- The system Hang on drive power pulling is fixed.
Driver version 4.1.0312.2003
- The system crash on drive power pulling in case of raid 0 is fixed.
- The reset bus reported by the testing team is resolved in this driver.
- The data integrity test failing on dit32 is fixed.
- Inf checker failing for .Net 2003 is fixed and verified.
Driver version 4.1.0307.2003
- The Driver now updates the Timestamp Following the protocol provided by the BIOS
Team.
Driver version 4.0.0303.2003
- IOCTL IOC_GET_CONTROLLER_INFO modified to provide subsystem device id
and vendor id information.
Company
LSI
Categories
HD Controller & Removable drive
Model
LSI MegaRaid Ide 100
Description
Drivers
Operating System
Windows 2003
Version
4.1.0709.2003
Size Driver
265KB
File Name
lsi_gen_4.1.0709.2003.zip
Observations
Contents on the disk
====================
README TXT This readme file
MEGAIDE Microsoft Windows miniport disk label file
TXTSETUP OEM Microsoft Windows miniport text mode setup file
Serv2003
MEGAIDE SYS Microsoft Windows Server 2003 miniport driver
MEGAIDE INF Microsoft Windows Server 2003 setup file
WIN2K
MEGAIDE SYS Microsoft Windows2000 miniport driver
MEGAIDE INF Microsoft Windows miniport setup file
WINNT
MEGAIDE SYS Microsoft Windows NT 4.0 miniport driver
MEGAIDE INF Microsoft Windows miniport setup file
WINXP
MEGAIDE SYS Microsoft Windows XP miniport driver
MEGAIDE INF Microsoft Windows miniport setup file
================
Software Version
================
Microsoft WindowsNT miniport driver 4.1.0709.2003
Microsoft Windows 2000 miniport driver 4.1.0709.2003
Microsoft Server 2003 miniport driver 4.1.0709.2003
Microsoft Windows XP miniport driver 4.1.0709.2003
==========
What's New
==========
Driver Version 4.1.0709.2003
- DMA Bus Master Data Integrity -- LSI found a rare operating condition with the MegaRAID IDE 100 and MegaRAID
ATA 133 controllers where an interrupt to the IDE device stops a write data operation before it is complete
and potentially discards the data rather than writing it to system memory. This issue was fixed by modifying
the driver to ignore a scenario where an interrupt on the bus master status register and the DMA-Active
bit is also set, and postpones interrupt handling. This sequence continues until the data transfers are
cleared. This prevents the abort of the DMA, thus maintaining data integrity.
Driver Version 4.1.0626.2003
- Stripe size reported to application is fixed.
- The Write verify command was not getting completed in Reset bus if the Drive power is pulled.
- Inode Fix is incorporated for all the controllers.
Driver version 4.1.0426.2003
- Fastidefirecommand Modified for better performance.
- Base Class and Sub Class Code check added in driver.
Driver version 4.1.0412.2003
- The Reset bus seen on RAID 10 configuration is fixed.
- Low performance seen on the Disk Transfer Rate test is fixed.
Driver version 4.1.0313.2003
- The system Hang on drive power pulling is fixed.
Driver version 4.1.0312.2003
- The system crash on drive power pulling in case of raid 0 is fixed.
- The reset bus reported by the testing team is resolved in this driver.
- The data integrity test failing on dit32 is fixed.
- Inf checker failing for .Net 2003 is fixed and verified.
Driver version 4.1.0307.2003
- The Driver now updates the Timestamp Following the protocol provided by the BIOS
Team.
Driver version 4.0.0303.2003
- IOCTL IOC_GET_CONTROLLER_INFO modified to provide subsystem device id
and vendor id information.
Company
LSI
Categories
HD Controller & Removable drive
Model
LSI MegaRaid Ide 100
Description
Drivers
Operating System
Windows NT4
Version
4.1.0709.2003
Size Driver
265KB
File Name
lsi_gen_4.1.0709.2003.zip
Observations
Contents on the disk
====================
README TXT This readme file
MEGAIDE Microsoft Windows miniport disk label file
TXTSETUP OEM Microsoft Windows miniport text mode setup file
Serv2003
MEGAIDE SYS Microsoft Windows Server 2003 miniport driver
MEGAIDE INF Microsoft Windows Server 2003 setup file
WIN2K
MEGAIDE SYS Microsoft Windows2000 miniport driver
MEGAIDE INF Microsoft Windows miniport setup file
WINNT
MEGAIDE SYS Microsoft Windows NT 4.0 miniport driver
MEGAIDE INF Microsoft Windows miniport setup file
WINXP
MEGAIDE SYS Microsoft Windows XP miniport driver
MEGAIDE INF Microsoft Windows miniport setup file
================
Software Version
================
Microsoft WindowsNT miniport driver 4.1.0709.2003
Microsoft Windows 2000 miniport driver 4.1.0709.2003
Microsoft Server 2003 miniport driver 4.1.0709.2003
Microsoft Windows XP miniport driver 4.1.0709.2003
==========
What's New
==========
Driver Version 4.1.0709.2003
- DMA Bus Master Data Integrity -- LSI found a rare operating condition with the MegaRAID IDE 100 and MegaRAID
ATA 133 controllers where an interrupt to the IDE device stops a write data operation before it is complete
and potentially discards the data rather than writing it to system memory. This issue was fixed by modifying
the driver to ignore a scenario where an interrupt on the bus master status register and the DMA-Active
bit is also set, and postpones interrupt handling. This sequence continues until the data transfers are
cleared. This prevents the abort of the DMA, thus maintaining data integrity.
Driver Version 4.1.0626.2003
- Stripe size reported to application is fixed.
- The Write verify command was not getting completed in Reset bus if the Drive power is pulled.
- Inode Fix is incorporated for all the controllers.
Driver version 4.1.0426.2003
- Fastidefirecommand Modified for better performance.
- Base Class and Sub Class Code check added in driver.
Driver version 4.1.0412.2003
- The Reset bus seen on RAID 10 configuration is fixed.
- Low performance seen on the Disk Transfer Rate test is fixed.
Driver version 4.1.0313.2003
- The system Hang on drive power pulling is fixed.
Driver version 4.1.0312.2003
- The system crash on drive power pulling in case of raid 0 is fixed.
- The reset bus reported by the testing team is resolved in this driver.
- The data integrity test failing on dit32 is fixed.
- Inf checker failing for .Net 2003 is fixed and verified.
Driver version 4.1.0307.2003
- The Driver now updates the Timestamp Following the protocol provided by the BIOS
Team.
Driver version 4.0.0303.2003
- IOCTL IOC_GET_CONTROLLER_INFO modified to provide subsystem device id
and vendor id information.
Company
LSI
Categories
HD Controller & Removable drive
Model
LSI MegaRaid Ide 100
Description
Drivers
Operating System
Windows XP
Version
4.1.0709.2003
Size Driver
265KB
File Name
lsi_gen_4.1.0709.2003.zip
Observations
Contents on the disk
====================
README TXT This readme file
MEGAIDE Microsoft Windows miniport disk label file
TXTSETUP OEM Microsoft Windows miniport text mode setup file
Serv2003
MEGAIDE SYS Microsoft Windows Server 2003 miniport driver
MEGAIDE INF Microsoft Windows Server 2003 setup file
WIN2K
MEGAIDE SYS Microsoft Windows2000 miniport driver
MEGAIDE INF Microsoft Windows miniport setup file
WINNT
MEGAIDE SYS Microsoft Windows NT 4.0 miniport driver
MEGAIDE INF Microsoft Windows miniport setup file
WINXP
MEGAIDE SYS Microsoft Windows XP miniport driver
MEGAIDE INF Microsoft Windows miniport setup file
================
Software Version
================
Microsoft WindowsNT miniport driver 4.1.0709.2003
Microsoft Windows 2000 miniport driver 4.1.0709.2003
Microsoft Server 2003 miniport driver 4.1.0709.2003
Microsoft Windows XP miniport driver 4.1.0709.2003
==========
What's New
==========
Driver Version 4.1.0709.2003
- DMA Bus Master Data Integrity -- LSI found a rare operating condition with the MegaRAID IDE 100 and MegaRAID
ATA 133 controllers where an interrupt to the IDE device stops a write data operation before it is complete
and potentially discards the data rather than writing it to system memory. This issue was fixed by modifying
the driver to ignore a scenario where an interrupt on the bus master status register and the DMA-Active
bit is also set, and postpones interrupt handling. This sequence continues until the data transfers are
cleared. This prevents the abort of the DMA, thus maintaining data integrity.
Driver Version 4.1.0626.2003
- Stripe size reported to application is fixed.
- The Write verify command was not getting completed in Reset bus if the Drive power is pulled.
- Inode Fix is incorporated for all the controllers.
Driver version 4.1.0426.2003
- Fastidefirecommand Modified for better performance.
- Base Class and Sub Class Code check added in driver.
Driver version 4.1.0412.2003
- The Reset bus seen on RAID 10 configuration is fixed.
- Low performance seen on the Disk Transfer Rate test is fixed.
Driver version 4.1.0313.2003
- The system Hang on drive power pulling is fixed.
Driver version 4.1.0312.2003
- The system crash on drive power pulling in case of raid 0 is fixed.
- The reset bus reported by the testing team is resolved in this driver.
- The data integrity test failing on dit32 is fixed.
- Inf checker failing for .Net 2003 is fixed and verified.
Driver version 4.1.0307.2003
- The Driver now updates the Timestamp Following the protocol provided by the BIOS
Team.
Driver version 4.0.0303.2003
- IOCTL IOC_GET_CONTROLLER_INFO modified to provide subsystem device id
and vendor id information.
Access to Official Website LSI
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.