Available 4 files for Iwill SIde DU280 QLA1280

 

Select Files

Company

Iwill

Categories

HD Controller & Removable drive

Model

Iwill SIde DU280 QLA1280

Description

Drivers

Operating System

MS-Dos

Size Driver

99KB

File Name

280_dos.exe

Observations

Readme for QLogic ISP1xxx Flash and NOVRAM programming utility.


The QLogic flash and novram programming utility is a DOS utility
with the following command line options:


/L xxxx = Write NOVRAM, adapter address = xxxx
If no address specified then write NOVRAM to all adapters
/F xxxx = Write Flash, adapter address = xxxx
If no address specified then write Flash to all adapters
/D xxxx = Copy NOVRAM to file: QL1xNVRM.SAV, adapter address = xxxx
/W xxxx = Copy Flash to file: QL1xROM.SAV, adapter address = xxxx
/U xxxx = Update Bios NOVRAM defaults, adapter address = xxxx
If no address specified then Update all adapters\r\n");
/N = Use instead of NVRMxx0.DAT
/O = Use instead of QLxxROM.BIN
/I = Ignore Subsystem ID
/M = Don't prompt for I/O address
/Q = Quiet Mode, no messages will be displayed
/V xxxx = Display current version number of BIOS on adapters at address xxxx
If no address specified then display BIOS version of all adapters
/C xxxx = Verify Flash of adapter at address xxxx
If no address specified then verify Flash of all adapters

The utility can be run without command line options
and it will prompt you for the required options.

Examples using some command line options:

To write NOVRAM on all QLA1xxx adapters in a
system without being prompted for I/O address:

ql1xutil /L
To write NOVRAM and Flash of all adapters:

ql1xutil /L /F
To write NOVRAM to adapter at I/O address f400:

ql1xutil /L f400
To write NOVRAM and flash to adapter at I/O address f800:

ql1xutil /L f800 /F f800

Company

Iwill

Categories

HD Controller & Removable drive

Model

Iwill SIde DU280 QLA1280

Description

Drivers

Operating System

Windows 2000

Size Driver

69KB

File Name

12802k713.exe

Observations

Contents
--------

1. OS Support
2. Supported Features
3. Release History
4. Creating the Driver Diskette
5. Installing the Driver
5.1. Fresh OS installation with the QLogic Controller as Boot
5.2. Adding the QLogic Controller to the Existing OS
5.3. Updating the existing QLogic Driver
6. Removing the Driver
7. Driver Parameters
8. Limitations
9. Additional Notes
10. Diskette Content
11. Contacting QLogic

======================================================================

1. OS Support
-------------

This release has been tested with Windows 2000 Build 2195 (X86)
release. Earlier versions of Windows 2000 are not supported.

======================================================================

2. Supported Features
---------------------

* Windows 2000 SCSI PnP interface
* Support for more than 8 LUNs (See Additional Notes)

======================================================================

3. Release History
------------------

Please refer to Release Notes.

======================================================================

4. Creating the Driver Diskette
-------------------------------

Locate the driver you want on the QLogic website and click "Link to
driver." When prompted "What would you like to do with this file?"
choose "Save this program to disk", then specify a temporary location
on a hard drive. Insert a blank diskette in the diskette drive. Run
the self-extracting file you just downloaded specifying A:\ for
"Unzip To Folder:".

======================================================================

5. Installing the Driver
------------------------

This section is divided into the following three sections.
1. Fresh OS installation with the QLogic Controller as Boot
2. Adding the QLogic Controller to the Existing OS
3. Updating the existing QLogic Driver
======================================================================

5.1. Fresh OS installation with the QLogic Controller as Boot
-------------------------------------------------------------

Perform the following steps to initially install Windows 2000 on the
SCSI drive (boot disk) attached to the QLA1280 controller.

Company

Iwill

Categories

HD Controller & Removable drive

Model

Iwill SIde DU280 QLA1280

Description

Drivers

Operating System

Windows 98-Me

Size Driver

63KB

File Name

1280w9x.exe

Observations

Release Notes
=============

This release has been tested with the following:

a. Windows 95 Retail Version.

b. Windows 95 OEM Service Release 2 (Build 950b).

c. Windows 98 Retail Version.
This document is divided into 4 Sections:

Section 1: Windows 95/98 files on this diskette.

Section 2: Installation of Windows 95/98 onto a SCSI disk.

Section 3: Adding a QLogic Adapter to an existing system.

Section 4: Miniport Driver Adapter Settings.

================================================
Section 1: Windows 95/98 files on this diskette
================================================

The Win9x directory on this diskette contains the following files:

QLOGIC.INF Driver installation script for Windows 95/98.

QL1280.MPD Windows 95/98 miniport driver for the QLogic
QLA1280 LVD PCI Dual SCSI Adapter.

QL1280.CAT Digital Signature Catalog file.

README.TXT This text file.

==========================================================
Section 2: Installation of Windows 95/98 onto a SCSI disk
==========================================================

To initially install Windows 95/98 on a SCSI disk and/or from
a CD-ROM attached to the QLogic PCI SCSI adapter:

2.1 For Windows 95 Retail Pack (General distribution, Build 950)
-----------------------------------------------------------------

1. Install QLogic SCSI Adapter and attach SCSI device(s).
2. Install DOS onto system boot disk.
3. If installing from CD-ROM attached to QLogic adapter,
install QLogic DOS drivers for supporting CD-ROM device and
the MSCDEX.EXE driver. (Refer to the README file in the root
directory of the "QLogic Software Drivers" diskette).
4. Boot to DOS, loading CD-ROM driver, then run the Windows 95 SETUP
program from the CD.
5. Once Win95 is loaded and operational, open the "My Computer"
icon, then open the "Control Panel" icon.
6. From the Control Panel window, open the "System" icon and
select "Device Manager" tab.
7. Listed under "Other devices", select "PCI SCSI Bus Controller"
and click on "Properties".
8. Select the "Driver" tab and click on "Change Driver".
9. Select "SCSI controllers" and click on "OK".
10. Insert the "QLogic Software Drivers" diskette and click on "Have Disk".
11. Enter "A:\Win9x" for path to QLogic driver and click "OK".
12. Select "QLA1280 LVD PCI Dual SCSI Adapter" and click "OK".
13. Click "OK" again to proceed with installing miniport driver.
14. Click "Cancel" in the dialog box that may say, "Windows cannot
determine if it can remove this device safely" (DO NOT "Test").

CAUTION: Clicking "TEST" may cause the system to hang. However,
restarting the system will result in normal operation.

Company

Iwill

Categories

HD Controller & Removable drive

Model

Iwill SIde DU280 QLA1280

Description

Drivers

Operating System

Windows NT4

Size Driver

73KB

File Name

1280nt713.exe

Observations

Contents
--------

1. OS Support
2. Supported Features
3. Release History
4. Creating the Driver Diskette
5. Installing the Driver
5.1. Fresh OS installation with the QLogic Controller as Boot
5.1.1. Installing Windows NT 4.0 from the CD-ROM
5.1.2. Installing Windows NT 4.0 from the diskettes
5.2. Adding the QLogic Controller to the Existing OS
5.3. Updating the existing QLogic Driver
6. Removing the Driver
7. Driver Parameters
7.1. System Parameters
7.2. NVRAM Parameters
8. Diskette Content
9. Contacting QLogic

======================================================================

1. OS Support
-------------

This release has been tested with Windows NT Version 4.00. Earlier
versions of NT are not supported.

======================================================================

2. Supported Features
---------------------

* Intel/Compaq PCI Hot Plug
* SCSI Diagnostic IOCTL support
* Support for 32 LUNs

======================================================================

3. Release History
------------------

Please refer to Release Notes.

======================================================================

4. Creating the Driver Diskette
-------------------------------

Locate the driver you want on the QLogic website and click "Link to
driver." If prompted "What would you like to do with this file?"
choose "Save this program to disk", then specify a temporary location
on a hard drive. Insert a blank diskette in the diskette drive. Run
the self-extracting file you just downloaded specifying A:\ for
"Unzip To Folder:".

======================================================================

5. Installing the Driver
------------------------

This section is divided into the following three sections:
1. Fresh OS installation with the QLogic Controller as Boot
2. Adding the QLogic Controller to the Existing OS
3. Updating the existing QLogic Driver

Access to Official Website Iwill

Sorry, Iwill Official Website has disappeared!

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.