Available 7 files for ICP GDT7123RN

 

Select Files

Company

ICP

Categories

HD Controller & Removable drive

Model

ICP GDT7123RN

Description

Drivers

Operating System

NetWare 5.x

Version

2.02 / 1.06

Size Driver

622KB

File Name

ham.exe

Observations

HAM drivers and ICP RAID Console (ICPCON)

Important Information for the ICP HAM Drivers
=============================================
Supported ICP controllers and NetWare versions
----------------------------------------------

Since HAM driver version 2.02 all ICP controllers of the RP-, RD-, RS-, RN-
and RZ series are supported. The HAM drivers are available for all NetWare
versions with NWPA support.

Installation instructions
-------------------------

- are available in the specific directories as readme.txt files
- copy all files and directories of the HAM directory to a floppy disk and
use this disk for the installation of NetWare
- NOTE: when replacing a DSK driver with the HAM interface ALL DSK drivers
have to be changed to HAM drivers!
- the ICP tools can be installed automatically with a Novell installation
routine (INSTALL., after installation they can be manually started (e.g. load icpcon)

Company

ICP

Categories

HD Controller & Removable drive

Model

ICP GDT7123RN

Description

Drivers

Operating System

OpenServer

Version

2.14 / 1.06

Size Driver

564KB

File Name

sco_ver5.exe

Observations

Driver and ICP RAID Console (ICPCON) for SCO Openserver up to 5.06a (Image file to create a driver disk under DOS, Windows, etc. please see the attached readme.txt file).

Company

ICP

Categories

HD Controller & Removable drive

Model

ICP GDT7123RN

Description

Drivers

Operating System

Unixware

Version

2.32 / 2.09a

Size Driver

614KB

File Name

uw7.exe

Observations

Driver and ICPCON for SCO UnixWare* up to 7.1.1.

The ICP Driver for Caldera Unixware
-----------------------------------

Creating a Driver Disk
======================
To create a driver disk from an image file simply start IWRITE,
with the name of the floppy drive that should be used and the
name of the image.

e.g. IWRITE A: UnixW7

creates the ICP Unixware 7 Driver Disk in floppy drive A:
A pre-formatted 1.44 MB floppy disk can be used as well as an unformatted one.
Please note that all data on the destination disk will be deleted.
IWRITE can be used under MS-DOS, Windows NT, Windows 95 and OS/2.
IWrite32 can be used under Windows NT / 2000 / XP.

If there are problems formatting or creating the floppy disk (e.g. under
Windows 95), please use a pre-formatted floppy disk and force IWRITE not
to format the media by setting the parameter '/F' ("IWRITE A: UnixW7 /F").

To check the contents of an image file simply use 'type' on the file.

e.g. "type UnixW7.IMG"

Company

ICP

Categories

HD Controller & Removable drive

Model

ICP GDT7123RN

Description

Drivers

Operating System

Windows 2000-XP

Version

3.03 / 2.09a

Size Driver

2.1MB

File Name

icptools.exe

Observations

ICP Service, ICP RAID Navigator, ICP RAID Console (ICPCON)

Company

ICP

Categories

HD Controller & Removable drive

Model

ICP GDT7123RN

Description

Drivers

Operating System

Windows 2000-XP

Version

3.03 / 2.09a

Size Driver

338KB

File Name

landesk.exe

Observations

Plug-In for the Intel Landesk Server Manager v6.0

ICP Controller Snap-In for Intel(R) LANDesk(R) Server Manager
=============================================================

1 Overview
----------

The ICP Controller Snap-Ins provide

* Integrating SNMP traps in LANDesk(R) Server Manager (LDSM). The traps
can be handled by Intel's AMSē (Alert Management System, Version 2).
For each trap separate actions can be configured, such as sending
E-Mails, Pager-Messages, Faxes, lauching applications,
shut down servers...

* Launching ICP RAID Navigator from the Server Management Console
for accessing the server's ICP RAID Controller(s).

2 Platform
----------

The ICP Controller Snap-In run on NT 4.0.

3 Installation
--------------

See file "install.txt" for installation instructions.

4 Configuring SNMP Alerts
-------------------------

After installation of ICP Controller Snap-Ins start the Management Console.
Each ICP Controller SNMP trap appears in the "SNMP Transport /
SNMP Trap Receiver / ICP RAID Controller" subtree of the Intel Management
Directory.

You can now configure a specific action on each different SNMP trap by
clicking on the trap name in the Management directory. In the "Configure
Alert Actions" window, you can invoke an alert configuration wizard by
double clicking on trap name.

For example, click on the "Array drive: Cache-drive failed" trap name in
the "ICP RAID Controller" subtree of the Management Directory. In the
"Configure Alert Actions" window, you can see an open folder named
"ICP RAID Controller" in which two items appear: "Default alert" and
"ICP RAID Controller: Array drive: Cache-drive failed".
Now double click on "ICP RAID Controller: Array drive: Cache-drive failed",
select an action and proceed with the configuration.

For detailled help, look at the "Configuring AMSē alert actions" chapter
in the Server Console's help file.

--- IMPORTANT NOTE: ---

a. You must configure your Server to send SNMP traps to the Management
Console's machine! A Windows(R) NT Server must have installed and
started the "SNMP Service".
In the "Services" page of the "Network" dialog box (from the Control
Panel), you can take a view on the properties of the SNMP service
by selecting "SNMP service" and pressing the "Properties..." button.
On the "traps" page you can determine trap destinations. One of the
destinations MUST be the Management Console's machine.

Furthermore, ICPSNMP (from the ICPTools package) must have been
installed on the server!

Company

ICP

Categories

HD Controller & Removable drive

Model

ICP GDT7123RN

Description

Drivers

Operating System

Windows 2000-XP

Version

3.03 / 2.09a

Size Driver

256KB

File Name

w2kwxp.exe

Observations

Driver and ICPCON

[Version]
Signature="$WINDOWS NT$"
Class=System
ClassGuid={4D36E97D-E325-11CE-BFC1-08002BE10318}
Provider=%MGMT%
DriverVer=07/13/2002,5.3.3.0
CatalogFile=mgmt.cat

[ControlFlags]
ExcludeFromSelect = *

[SourceDisksNames]
1 = %FLOPPY1_DESCRIPTION%,icp.tag,,

[SourceDisksFiles]

[MgtFiles]
;
; Dummy section to satisfy ChkInf tool
;
[DestinationDirs]
DefaultDestDir = 12
[Manufacturer]
%MGMT% = MGMT

[MGMT]
%SCSI\ProcessorIOCTL_-_Device__________.DeviceDesc% = NODRV, SCSI\ProcessorIOCTL_-_Device__________
[NODRV]
;
; Dummy directive to satisfy ChkInf tool
;
CopyFiles = MgtFiles

[NODRV.Services]
;
; this is blank to just allow the install to succeed
;
AddService = , %SPSVCINST_ASSOCSERVICE% ; null service install

[strings]
MGMT = "ICP vortex Computersysteme GmbH"
SCSI\ProcessorIOCTL_-_Device__________.DeviceDesc = "Controller Management Device"
FLOPPY1_DESCRIPTION = "Controller Management Device"

;*******************************************
;Handy macro substitutions (non-localizable)
SPSVCINST_ASSOCSERVICE = 0x00000002

Company

ICP

Categories

HD Controller & Removable drive

Model

ICP GDT7123RN

Description

Drivers

Operating System

Windows NT4

Version

3.03 / 2.09a

Size Driver

437KB

File Name

winnt.exe

Observations

Driver and ICPCON

[Identification]
OptionType = SCSI

[LanguagesSupported]
ENG

[Options]
"GDTSCSI" = gdtx

[OptionsTextENG]
"GDTSCSI" = "ICP GDT Disk Array Controller"

[MiniportDrivers]
gdtx = !SERVICE_KERNEL_DRIVER, "SCSI Miniport", !SERVICE_ERROR_NORMAL, 32, %SystemRoot%\System32\IoLogMsg.dll , 7

[Identify]
;
;
read-syms Identification

set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)

Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
;
;
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}

;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
goto returnoptions
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif

;
; form a list of all the options and another of the text representing
;

returnoptions = +
set OptionList = ^(Options, 0)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL

finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]

;
; Set default values for
;
set Status = STATUS_FAILED
set DrivesToFree = {}

Access to Official Website ICP

Sorry, ICP Official Website has disappeared!

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.