Available 4 files for Centos CI-1520U10
Select Files
Company
Centos
Categories
HD Controller & Removable drive
Model
Centos CI-1520U10
Description
Ultra ATA100 Host Adapter BIOS
Operating System
BIOS
Version
2.34
Size Driver
15KB
File Name
370_100_bios.zip
Company
Centos
Categories
HD Controller & Removable drive
Model
Centos CI-1520U10
Description
Ultra ATA100 Host Adapter
Operating System
Windows 2000
Version
1.00
Size Driver
25KB
File Name
370_100_2k.zip
Observations
This readme provides the information needed to install and use the HPT370
device driver for Microsoft Windows NT 4.0.
The Windows NT sub-directory (\NT) on the driver diskette contains the
following files:
HPT370.SYS A HPT370 device driver for Windows NT 4.0
OEMSETUP.INF A file used by Windows NT 4.0 Setup for driver
installation
README.TXT An ASCII text file describing the HPT370 device
driver for Windows NT 4.0
TEXTSETUP.OEM A file used during Windows NT installation
HPT370.TAG A tag file required during during Windows NT installation
DISK1 A flag of device driver which is required during Windows
NT installation
When Windows NT is up, then install HPT370 device driver as following
1. Installing Device Driver
1. Open My Computer
2. Open Control Panel
3. Double click icon SCSI Adapters
4. Click Drivers
5. Click Add...
6. Click Have Disk...
7. Insert the floppy diskette containing HPT370 Windows NT 4.0 device
driver into drive A, and type in "A:\NT[Enter]", then click OK
8. Select HPT370 Ultra DMA Controller, you will be asked to enter the
full path to the HPT370 Ultra DMA Controller files, type in A:\NT
and then click Continue
9. When asked to restart your computer, click Yes
Your hard disk drive attached to the HPT370 host adapter must be
partitioned and formatted before you can access it. Please see
Partitioning Your Hard Disk to know how to partition and format a hard
disk drive.
2. Checking the Installation
If you want to check if the HPT370 host adapter and its device driver are
correctly installed, you can:
1. Open My Computer
2. Open Control Panel
3. Double click icon SCSI Adapters
4. You should see the item HPT370 Ultra DMA Controller (started) listed
3. Partitioning Your Hard Disk
If the hard disk drive attached to the HPT370 host adapter has not been
partitioned and formatted yet, you need to partition it first. To
partition the hard disk drive attached to the HPT370 host adapter, follow
the following steps:
1. Click the Startup button
2. Go to Administrative Tools (Common)
3. Run Disk Administrator
4. Select disk number you would like to partition
5. Select the menu Partition
6. Decide the partition size create partition of the size
7. Exit Disk Administrator
8. Select the new created partition (logical disk drive) and format it
Company
Centos
Categories
HD Controller & Removable drive
Model
Centos CI-1520U10
Description
Ultra ATA100 Host Adapter
Operating System
Windows 95-98-98Se-Me
Version
1.00
Size Driver
22KB
File Name
370_100_98.zip
Observations
This installation procedure is specific only to the current version of the
driver and installation file.
NOTE:
The driver (HPT370.MPD) and installation file (HPT370.INF) must be
located on the same directory of the install floppy diskette.
Usually, when you plug the HPT370 Ultra DMA host adapter into your system and
boot up the Windows 95/98 system, the system will be able to detect the HPT370
Ultra DMA host Adapter automatically and ask you to install the driver for HPT370.
You can just follow the instructions promted by the system to install the
driver.
Otherwise, you can install the driver by the following steps:
1. Windows 95/98 must be installed on the system prior to installing the
driver.
2. Close any running applications.
3. Open "My Computer".
4. Double click on the "Control Panel" icon.
5. Double click on the "Add New Hardware" applet.
6. Click on the "Next" button.
7. There is a window that ask you "Do you want Windows to search for your
new hardware?", choose "No" then click on the "Next" button.
8. There is a Window listing hardware types, select the "SCSI controllers"
then click on the "Next" button.
9. Put the install diskette into the drive A: and then click on the
"Have Disk..." button.
10. Click on the "OK" button.
11. Click on the "Next" button.
12. If there is a window showing the settings (resources) to be used by the
driver, then click on the "Next" again. At this point, the system will
install the driver.
13. Click on the "Finish" button.
14. Then the system will ask you to restart the system. If the settings
reported in step 12 are not what set on the host adapter, you must
adjust the settings by using the device manager in the System control
panel before restarting your computer.
Company
Centos
Categories
HD Controller & Removable drive
Model
Centos CI-1520U10
Description
Ultra ATA100 Host Adapter
Operating System
Windows NT4
Version
1.00
Size Driver
23KB
File Name
370_100_nt.zip
Observations
This readme provides the information needed to install and use the HPT370
device driver for Microsoft Windows NT 4.0.
The Windows NT sub-directory (\NT) on the driver diskette contains the
following files:
HPT370.SYS A HPT370 device driver for Windows NT 4.0
OEMSETUP.INF A file used by Windows NT 4.0 Setup for driver
installation
README.TXT An ASCII text file describing the HPT370 device
driver for Windows NT 4.0
TEXTSETUP.OEM A file used during Windows NT installation
HPT370.TAG A tag file required during during Windows NT installation
DISK1 A flag of device driver which is required during Windows
NT installation
When Windows NT is up, then install HPT370 device driver as following
1. Installing Device Driver
1. Open My Computer
2. Open Control Panel
3. Double click icon SCSI Adapters
4. Click Drivers
5. Click Add...
6. Click Have Disk...
7. Insert the floppy diskette containing HPT370 Windows NT 4.0 device
driver into drive A, and type in "A:\NT[Enter]", then click OK
8. Select HPT370 Ultra DMA Controller, you will be asked to enter the
full path to the HPT370 Ultra DMA Controller files, type in A:\NT
and then click Continue
9. When asked to restart your computer, click Yes
Your hard disk drive attached to the HPT370 host adapter must be
partitioned and formatted before you can access it. Please see
Partitioning Your Hard Disk to know how to partition and format a hard
disk drive.
2. Checking the Installation
If you want to check if the HPT370 host adapter and its device driver are
correctly installed, you can:
1. Open My Computer
2. Open Control Panel
3. Double click icon SCSI Adapters
4. You should see the item HPT370 Ultra DMA Controller (started) listed
3. Partitioning Your Hard Disk
If the hard disk drive attached to the HPT370 host adapter has not been
partitioned and formatted yet, you need to partition it first. To
partition the hard disk drive attached to the HPT370 host adapter, follow
the following steps:
1. Click the Startup button
2. Go to Administrative Tools (Common)
3. Run Disk Administrator
4. Select disk number you would like to partition
5. Select the menu Partition
6. Decide the partition size create partition of the size
7. Exit Disk Administrator
8. Select the new created partition (logical disk drive) and format it
Access to Official Website Centos
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.