1.1. Features 1.1.1. PCI Interface Compliant with PCI Specification, revision 2.2. Integrated PCI DMA engines. 32 bit, 33/66MHz fully compliant PCI host interface. 1.1.2. High Speed Serial ATA Interface Four high speed Serial ATA interface ports, each supporting 1st generation Serial ATA data rates (1.5Gb/s). Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously writing data to 2 drives. Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives. RAID 0+1 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring. Fully compliant with Serial ATA 1.0 specifications. Supports Spread Spectrum in receiver. Independent 256-byte FIFOs (32 bit * 64 deep) per Serial ATA channel for host reads and writes. 1.1.3. The Individual features for different HBA Models 1.1.3.1. Model A: Serial ATA Internal 4 Ports Supports Independent four Internal Ports 1.1.3.2. Model B: SATA External 2 Port + Internal 2 Port Supports two External Ports and two Internal Ports Special Shell SATA connectors on External Port to support Mobile HDD, Mobile CD-ROM, Mobile DVD and Mobile CD-RW
Company
Bafo
Categories
HD Controller & Removable drive
Model
Bafo BF-5318
Description
Raid SATA 2+2-Port PCI Host
Operating System
Windows 98Se-Me-2000-XP
Size Driver
130KB
File Name
5318_98me2kxp_v1.0.zip
Observations
Table of Contents -----------------
1) Windows NT 4.0 and Windows 2000/XP Fresh Installation.
2) Adding the SiI RAID controller to an existing Windows NT installation.
3) Adding the SiI RAID controller to an existing Windows 2000/XP installation.
4) Verifying controller installation under Windows NT, 2000 and XP.
5) Update SiI RAID driver on Windows NT 4.0 with existing Silicon Image driver.
6) Update SiI RAID driver on Windows 2000/XP with existing Silicon Image driver.
7) Windows 98SE and Windows ME Fresh Installation Instructions.
8) First time installing SiI RAID driver with existing Windows 98SE/ME.
9) Update SiI RAID driver on Windows 98SE/ME with existing Silicon Image driver.