Available 2 files for Bafo BF-5311

Company

Bafo

Categories

HD Controller & Removable drive

Model

Bafo BF-5311

Description

SATA 2 Port Host Adapter

Operating System

Manual

Size Driver

54KB

File Name

5311_manual_v1.0.zip

Observations

1.1. Features
1.1.1. PCI Interface

Compliant with PCI Specification, revision 2.2

Integrated PCI DMA engines

32 bit, 33/66MHz fully compliant PCI host interface
1.1.2. High Speed Serial ATA Interface

Dual high speed Serial ATA interface Channels, each supporting 1st
generation Serial ATA data rates (1.5Gb/s)

Fully compliant with Serial ATA 1.0 specifications

Supports Spread Spectrum in receiver

Independent 256-byte FIFOs (32 bit * 64 deep) per Serial ATA channel for
host reads and writes
1.1.3. The Individual features for different Models
1.1.3.1. Model A: Serial ATA Internal 2 Ports

Supports Independent two Internal Ports
1.1.3.2. Model B: External 1 Port + Internal 1 Port

Supports one External Port and one Internal Port

One Special Shell SATA connector on External Port to support Mobile HDD,
Mobile CD-ROM, Mobile DVD and Mobile CD-RW
1.1.3.3. Model C: Internal 1 Port + External 1 Port + Bracket Power

Independent one Internal SATA Ports

One External Port and one Internal Port sharing one SATA Channel

One Special Shell SATA connector on External Port to support Mobile HDD,
Mobile CD-ROM, Mobile DVD and Mobile CD-RW

One USB-like Connector on board to provide 2A / 5V DC power output for
Mobile Storage Devices using
1.1.3.4. Model D: External 2 Ports + Bracket Power

Independent two External SATA Ports

Two Special Shell SATA connector on External Port to support Mobile HDD,
Mobile CD-ROM, Mobile DVD and Mobile CD-RW

Company

Bafo

Categories

HD Controller & Removable drive

Model

Bafo BF-5311

Description

SATA 2 Port Host Adapter

Operating System

Windows 98Se-Me-2000-XP

Size Driver

130KB

File Name

5311_98me2kxp_v1.0.zip

Observations

Table of Contents
-----------------

1) Windows NT 4.0 and Windows 2000/XP Fresh Installation.

2) Adding the SiI RAID controller to an existing Windows NT installation.

3) Adding the SiI RAID controller to an existing Windows 2000/XP installation.

4) Verifying controller installation under Windows NT, 2000 and XP.

5) Update SiI RAID driver on Windows NT 4.0 with existing Silicon Image driver.

6) Update SiI RAID driver on Windows 2000/XP with existing Silicon Image driver.

7) Windows 98SE and Windows ME Fresh Installation Instructions.

8) First time installing SiI RAID driver with existing Windows 98SE/ME.

9) Update SiI RAID driver on Windows 98SE/ME with existing Silicon Image driver.