BenQ CRW 1032A CD & DVD > Downloads Drivers, Manual and Firmware

Company

BenQ

Categories

CD & DVD

Model

BenQ CRW 1032A

Description

Firmware upgrade

Operating System

Firmware upgrade

Version

7.GZ

Size Driver

201KB

File Name

1032a1.zip

Observations

Firmware upgrade and laser recalibration program. Be sure to read the readme.txt inside! Firmware upgrade and adjusting laser power tool**

This file can re-adjust the laser power and upgrade firmware to 7.GZ.

1. Un-zip the 1032A.exe, and you would see three files as follows,

1032-7gz.exe => firmware upgrade tool
service.bin => laser adjust tool
readme.txt => this file

2. Boot the PC with MS-DOS mode.
(Attention ! : Upgrade utility cannot work on MS-DOS window.)

3. Execute 1032-7gz.exe

Attention !
1. Tray will open when adjusting laser power, please don't close the tray.
2. There are three phases in the process and it would cost almost 2 minutes.
3. When you see " Please restart your computer ", it means the process is O.K.

Company

BenQ

Categories

CD & DVD

Model

BenQ CRW 1032A

Description

CDROM-DVDROM-CDREWRITER MS-DOS Driver

Operating System

MS-DOS

Version

2.14

Language Driver

English, Spanish, German, Italian, and French

Size Driver

177KB

File Name

apicd214.exe

Observations

CDROM / DVDROM / CDREWRITER MS-DOS Driver . Self-extracting ZIP file containing device driver file for MS-DOS Only

A B O U T C D - R O M D E V I C E D R I V E R
=======================================================================

To install the CD-ROM device driver, the syntax in CONFIG.SYS
is as follows:

DEVICE=VIDE-CDD.SYS /D:MSCD001 [/P:xxx,yy] [/L:xx]

where [/P:xxx,yy]
specifies the IDE port which is connected to the drive and the
interrupt request.

'xxx' is the base address (hexadecimal notation) of IDE port.
xxx = 1f0 : Port 1
170 : Port 2
1e8 : Port 3
168 : Port 4

'yy' is the interrupt number (decimal notation) of the
corresponding IDE port.

[/L:xx]
specifies the message language. Available options are listed
as below:

xx = US : English (the default language)
GR : German
FR : French
SP : Spanish
IT : Italian
JP : Japanese

For example, when eight drives are installed, the command
line in the CONFIG.SYS file could be entered as follows:

DEVICE=VIDE-CDD.SYS /D:MSCD001 /P:1f0,14 /P:170,15 /P:1e8,12 /P:168,10

NOTE:

Our device driver will automatically search the drives for 4 ports
up to 8 drives, and the ports are 0x1f0, 0x170, 0x1e8 and 0x168 with
interrupt number 14, 15, 12 and 10 as default, respectively. If your
IDE ports and their respective interrupt numbers are the same as
those mentioned above, you don't have to specify them verbosely.

Access to Official Website BenQ

Home English Home Spanish Home French Home German Drivers English Drivers Spanish Drivers French Drivers German

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 19 files for BenQ CRW 1032A

Select Files