Available 6 files for E-Tech IPCM04
Select Files
Company
E-Tech
Categories
Cameras
Model
E-Tech IPCM04
Description
IP Camera III Wireless
Operating System
IP Detect tool v1.5
Size Driver
1.2MB
File Name
ip-detect-1.5.zip
Observations
Programma om uw camera op te sporen in het netwerk.
Tool to detect your camera in your network.
Company
E-Tech
Categories
Cameras
Model
E-Tech IPCM04
Description
IP Camera III Wireless
Operating System
IPCM04 Firmware versie 2.8
Version
2.8 10-Jan-2008
Size Driver
1.6MB
File Name
ipcm04-firmware-2-8.zip
Observations
IPCM03/IPCM04 firmware update
Attention! This firmware update is not suitable for the IPCM01/IPCM02
The following steps in the upgrade procedure of firmware version 2.8 have been improved:
• Problems with sending e-mail messages using the web interface have been solved
• Improved version of the ActiveX module
• Problem with ‘Video without password’ has been solved
Removing current ActiveX component
Remove the current ActiveX component before upgrading the firmware. This file can be found on your
computer and is not automatically updated.
Follow the instructions below to remove this file.
1. Click Start, then ‘Search’.
2. Click ‘Files or Folders’.
3. Enter ‘camimage’ in the search field.
4. Click ‘Search’ to start searching.
5. Click ‘Stop’ when the file is shown in the list.
6. Right click ‘Camimage Class’ and choose ‘Remove’.
7. Confirm with ‘Yes’
The file has now been removed. In the next chapter we will explain how to update the camera itself.
Connecting to the camera
Make sure the camera is connected to a router or directly to a computer using a cable. When directly
connected to a computer you will need to manually set an IP address on your network connection.
Follow the instructions below (Windows 2000/XP/Vista):
1. Go to Start, Control Panel and then Network Connections (Vista: Go to Network Centre and
click ‘Manage network connections’).
2. Use the right mouse button to summon the Properties of the network connection.
3. Select Internet Protocol (TCP/IP) (Vista: Version 4)
4. Click Properties to change the settings of this protocol.
5. Enter an IP address, for instance 192.168.1.120.
6. Enter the Subnet mask 255.255.255.0.
7. Gateway and DNS addresses are not required.
8. Click OK to confirm the settings.
9. Click OK/Close to close the Properties of the connection.
10. Close all windows.
Executing firmware update
Take notice of the following before executing the firmware update!
• Do not install this firmware version on a IPCM01/IPCM02.
• The firmware update needs to be executed using a cabled connection. Do not try to
update firmware using a wireless connection!
• Set the switches on the camera to RJ45 and IP. Only then you may turn on the
camera to proceed with the update.
• During the upgrade the connection with the camera needs to stay active. Do NOT
turn of your camera or router during the procedure. Do NOT restart your computer
during the upgrade.
• When the upgrade is done the default settings will automatically be restored.
1. Open the web page of the camera. The default address is http://192.168.1.100. Search for
the camera using the IP Detect tool if the camera can not be found.
2. Select English and click ‘Ip Camera Settings’.
3. Click ‘Admin’ in the left column.
4. The following screen is shown:
5. Click the invisible ‘Software Update’ button next to ‘ReleaseTime’.
6. The following screen is shown:
7. Click ‘Browse’ and select the file. (IPCamEUOV_2_8.bin)
8. Click ‘Upload’ to start the upgrade procedure.
9. The camera will run the update and will show the following screen:
10. After 3 minutes the upgrade is finished. The camera will ask for a restart. This takes about 1
minute. After restarting the upgrade is done. The camera will be accessible using the address
192.168.1.100.
Company
E-Tech
Categories
Cameras
Model
E-Tech IPCM04
Description
IP Camera III Wireless
Operating System
USB Driver
Size Driver
1.7MB
File Name
ipcm03_04_ov530_usb.zip
Company
E-Tech
Categories
Cameras
Model
E-Tech IPCM04
Description
IP Camera III Wireless
Operating System
Walkguard Software 7.0
Size Driver
25.5MB
File Name
walkguard_7.0.zip
Observations
Walkguard software 7.0 Ook geschikt voor Vista
Walkguard software 7.0 Also suitable for Vista
Company
E-Tech
Categories
Cameras
Model
E-Tech IPCM04
Description
IP Camera III Wireless
Information
Handleiding (NL)
Operating System
Manual
Language Manual
Dutch
Size Driver
240KB
File Name
ipcam04_manual_nl_a4.pdf
Observations
Handleiding, Nederlands
Dutch Manual
Company
E-Tech
Categories
Cameras
Model
E-Tech IPCM04
Description
IP Camera III Wireless
Information
Handleiding (UK)
Operating System
Manual
Language Manual
English
Size Driver
240KB
File Name
ipcam04_manual_nl_a4.pdf
Observations
Handleiding, Engels
English Manual
Access to Official Website E-Tech
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.