Available 5 files for Casio EX-S20U
Select Files
Company
Casio
Categories
Cameras
Model
Casio EX-S20U
Description
Re-installing the USB Driver when Upgrading from Windows2000 to WindowsXP
Operating System
Windows 2000-XP
Size Driver
22.9KB
File Name
win2kup.exe
Observations
Supported Models
QV-2300UX, QV-2400UX, QV-2800UX, QV-2900UX, QV-3EX, QV-3000EX/Ir, QV-3500EX, QV-4000, QV-5700, QV-R3, QV-R4, QV-R40, QV-R41, QV-R51, QV-R52, QV-R61, QV-R62,
GV-10, GV-20,
EX-S1, EX-S2, EX-S3, EX-S20, EX-S20U, EX-S100, EX-M1, EX-M2, EX-M20, EX-M20U, EX-Z3, EX-Z4, EX-Z4U, EX-Z30, EX-Z40, EX-Z50, EX-Z55, EX-Z57, EX-P600, EX-P700
[ Description ]
After you upgrade to Windows XP on a Windows 2000 computer where the QV Digital Camera USB driver was originally installed using plug and play, the standard USB driver may not install properly when you connect a USB cable. If you experience problems performing USB data communication after upgrading to Windows XP, perform the steps provided below to install the USB driver.
[ When installation is not required ]
The standard USB driver should install automatically the first time you connect a USB cable to your computer after upgrading to Windows XP from a Windows 2000 configuration like the once described below.
QV Digital Camera USB driver was not installed under Windows 2000.
Windows 2000 USB Filter Driver, downloaded from the CASIO Website, was installed under Windows 2000.
QV Digital Camera driver was installed using Setup on the CD-ROM that comes bundled with the QV Digital Camera.
Important!
You may still experience USB data communication problems even if you uninstall the QV Digital Camera USB driver from Windows 2000 before upgrading to Windows XP.
[ Symptoms of USB Data Communication Problems ]
The USB data communication problem being described here exists if the message "Cannot Install this Hardware CASIO DIGITAL CAMERA" (Figure 1) appears on your computer screen the first time you connect the USB cable after upgrading from Windows 2000 to Windows XP. If this happens, click [Finish] and then perform the installation procedure below.
Figure 1
[ To install the USB driver ]
1. Go here and download the file named win2kup.exe(22.9KB) .
Double-click the file with your mouse, which will extract a file named win2kup.inf.
On some computers, the extracted file name will appear as win2kup instead of win2kup.inf.
2.
Copy win2kup.inf to a floppy diskette, and insert the diskette into your computer's disk drive (A:).
Figure 2
3. Turn on your QV Digital Camera and connect it to your computer using the USB cable.
4.
Select My Computer, right-click and then select Properties.
On the dialog box that appears, select Hardware Device Manager Universal Serial Bus controllers.
5. Select CASIO DIGITAL CAMERA, which should have a yellow exclamation mark (!) next to it (Figure 3). Right-click with your mouse and then select Update Driver.
Figure 3
6. Under What do you want the wizard to do? on the Hardware Update Wizard screen, select Install from a list or specific location (Advanced) and then click Next.
Figure 4
7. For Please choose your search and installation option, select Don't search. I will choose the driver to install and then click Next.
Figure 5
8. For Hardware Type, select Universal Serial Bus controllers and then click Next.
Figure 6
9. For Model under Select the device driver you want to install for this hardware, select CASIO DIGITAL CAMERA, and then click Have Disk.
Figure 7
10. When the Install From Disk screen appears, make sure that A:/ is selected for Copy manufacture's files from: and then click OK. If A:/ is not selected, click Browse and then select A:/.
Figure 8
11. This should cause Select the device driver you want to install for this hardware to change to Casio Digital Camera, so click Next.
Figure 9
12. This will cause the message has not passed Windows Logo testing to verify its compatibility with Windows XP to appear on the Hardware Installation screen. Simply click Continue Anyway.
Figure 10
13. On the Completing the Hardware Update Wizard screen, click Finish.
Figure 11
14. Next, open Device Manager again.
15. In Universal Serial Bus controllers, select Casio Digital Camera, right-click with your mouse, and then select Update Driver.
Figure 12
16. When Hardware Update Wizard appears, select Install the software automatically (Recommended) for What do you want the wizard to do?, and then click Next.
Figure 13
17. On the Completing the Hardware Update Wizard screen, click Finish.
Figure 14
18. This completes the installation procedure. Next you should perform the steps below to confirm that the driver is selected correctly.
>[ To check if the USB driver is selected ]
1. Select Device Manager Universal Serial Bus controllers Casio Digital Camera.
2.
Right-click with the mouse to display Properties.
3. Select Driver Driver Details.
4.
Confirm that the qv2kux.sys file is selected under Driver files:, and then click OK.
If qv2kux.sys file is not selected, click OK and perform the entire procedure under "To install the USB driver" again.
Figure 15
Company
Casio
Categories
Cameras
Model
Casio EX-S20U
Description
Firmware Update Software for North American customers
Operating System
Macintosh
Version
1.01
Language Firmware
Feb.2004
Size Driver
1.64MB
File Name
ex-s20u_1011.sit
Observations
To install the update software on your camera
• If firmware update installation is interrupted due to low battery power, your camera will no longer be able to operate. Be sure to load a fresh set of new batteries into the camera before starting the firmware update installation procedure.
• After copying the EX-S20.BIN or EX-M20.BIN software to camera built-in memory or memory card, remove the camera from its USB cradle before installing the firmware onto the camera. This firmware update cannot be installed while the camera is on the USB cradle.
1) Extract the file you downloaded.
Windows Users
* Double-click the file you downloaded, and it will self-extract. EX-S20U_101.exe extracts to EX-S20.BIN, while EX-M20U_101.exe extracts to EX-M20.BIN.
Macintosh Users
* Use Stuffit Expander or some other similar application to extract the file you downloaded. EX-S20U_101.sit extracts to EX-S20.BIN, while EX-M20U_101.sit extracts to EX-M20.BIN.
2) Place the camera onto its USB cable and establish a USB connection with your computer.
3) Copy the extracted file (EX-S20.BIN or EX-M20.BIN) to the root directory (the top directory on the drive) in camera built-in memory or on a memory card.
Windows
Macintosh
4) Remove the camera from its USB cradle.
5) On your camera, hold down the [MENU] button (Figure 1) as you press the [POWER] button (Figure 2) to turn on the camera. Keep the [MENU] button depressed until the message "PROGRAM UPDATE" (Figure 3) appears on the monitor screen.
(Figure 1)
(Figure 2)
(Figure 3)
6) On the "PROGRAM UPDATE" screen, move the highlighting from [NO] to [YES] by pressing (Figure 4). Next, press the [SET] button (Figure 5).
(Figure 4)
(Figure 5)
7) This starts installation of the update firmware, which is indicated by the message "NOW LOADING" on the camera monitor screen. The message "COMPLETE" (Figure 6) appears when installation is complete.
(Figure 6)
8) After installation is complete, turn off the camera.
9) Check if the firmware version has been updated.
* If you copied the firmware update file (EX-S20.BIN or EX-M20.BIN) directly into camera memory, delete the copied file from camera memory. Next, hold down the camera's [MENU]button as you press the [POWER] button to turn on the camera. Keep [MENU]depressed until the version of your camera's firmware appears on the monitor screen. If "Ver.1.01" appears, it means that firmware update installation was successful.
* If you copied the firmware update file (EX-S20.BIN or EX-M20.BIN) to a memory card, remove the memory card from the camera. Next, hold down the camera's [MENU] button as you press the [POWER] button to turn on the camera. Keep [MENU] depressed until the version of your camera's firmware appears on the monitor screen. If "Ver.1.01" appears, it means that firmware update installation was successful.
Important!
* Before installing the firmware update, be sure you back up the data in camera memory to a memory card or your computer's hard disk.
* Installing the update software can cause changes in the camera's image memory size, camera startup time, recording time, recording interval, user settings, etc.
* If firmware update installation is interrupted due to low battery power, your camera will no longer be able to operate. Be sure to load a fresh set of new batteries into the camera before starting the firmware update installation procedure.
* If you are unable to restart your camera after installing the update software, contact your local Authorized Service Center of Casio distributor or Casio Techno Technical Center. Tell them you need assistance because your camera will not restart after installing EX-S20U or EX-M20U firmware.
* Note that installation of the update software cannot be undone. Once you install the update software, there is no way to restore your camera to its original firmware version.
Company
Casio
Categories
Cameras
Model
Casio EX-S20U
Description
Firmware Update Software for North American customers
Operating System
Macintosh
Version
1.01
Language Firmware
Feb.2004
Size Driver
1.64MB
File Name
ex-s20u_101.sit
Observations
To install the update software on your camera
• If firmware update installation is interrupted due to low battery power, your camera will no longer be able to operate. Be sure to load a fresh set of new batteries into the camera before starting the firmware update installation procedure.
• After copying the EX-S20.BIN or EX-M20.BIN software to camera built-in memory or memory card, remove the camera from its USB cradle before installing the firmware onto the camera. This firmware update cannot be installed while the camera is on the USB cradle.
1) Extract the file you downloaded.
Windows Users
* Double-click the file you downloaded, and it will self-extract. EX-S20U_101.exe extracts to EX-S20.BIN, while EX-M20U_101.exe extracts to EX-M20.BIN.
Macintosh Users
* Use Stuffit Expander or some other similar application to extract the file you downloaded. EX-S20U_101.sit extracts to EX-S20.BIN, while EX-M20U_101.sit extracts to EX-M20.BIN.
2) Place the camera onto its USB cable and establish a USB connection with your computer.
3) Copy the extracted file (EX-S20.BIN or EX-M20.BIN) to the root directory (the top directory on the drive) in camera built-in memory or on a memory card.
Windows
Macintosh
4) Remove the camera from its USB cradle.
5) On your camera, hold down the [MENU] button (Figure 1) as you press the [POWER] button (Figure 2) to turn on the camera. Keep the [MENU] button depressed until the message "PROGRAM UPDATE" (Figure 3) appears on the monitor screen.
(Figure 1)
(Figure 2)
(Figure 3)
6) On the "PROGRAM UPDATE" screen, move the highlighting from [NO] to [YES] by pressing (Figure 4). Next, press the [SET] button (Figure 5).
(Figure 4)
(Figure 5)
7) This starts installation of the update firmware, which is indicated by the message "NOW LOADING" on the camera monitor screen. The message "COMPLETE" (Figure 6) appears when installation is complete.
(Figure 6)
8) After installation is complete, turn off the camera.
9) Check if the firmware version has been updated.
* If you copied the firmware update file (EX-S20.BIN or EX-M20.BIN) directly into camera memory, delete the copied file from camera memory. Next, hold down the camera's [MENU]button as you press the [POWER] button to turn on the camera. Keep [MENU]depressed until the version of your camera's firmware appears on the monitor screen. If "Ver.1.01" appears, it means that firmware update installation was successful.
* If you copied the firmware update file (EX-S20.BIN or EX-M20.BIN) to a memory card, remove the memory card from the camera. Next, hold down the camera's [MENU] button as you press the [POWER] button to turn on the camera. Keep [MENU] depressed until the version of your camera's firmware appears on the monitor screen. If "Ver.1.01" appears, it means that firmware update installation was successful.
Important!
* Before installing the firmware update, be sure you back up the data in camera memory to a memory card or your computer's hard disk.
* Installing the update software can cause changes in the camera's image memory size, camera startup time, recording time, recording interval, user settings, etc.
* If firmware update installation is interrupted due to low battery power, your camera will no longer be able to operate. Be sure to load a fresh set of new batteries into the camera before starting the firmware update installation procedure.
* If you are unable to restart your camera after installing the update software, contact your local Authorized Service Center of Casio distributor or Casio Techno Technical Center. Tell them you need assistance because your camera will not restart after installing EX-S20U or EX-M20U firmware.
* Note that installation of the update software cannot be undone. Once you install the update software, there is no way to restore your camera to its original firmware version.
Company
Casio
Categories
Cameras
Model
Casio EX-S20U
Description
Firmware Update Software for North American customers
Operating System
Windows
Version
1.01
Language Firmware
Feb.2004
Size Driver
1.82MB
File Name
ex-s20u_1011.exe
Observations
To install the update software on your camera
• If firmware update installation is interrupted due to low battery power, your camera will no longer be able to operate. Be sure to load a fresh set of new batteries into the camera before starting the firmware update installation procedure.
• After copying the EX-S20.BIN or EX-M20.BIN software to camera built-in memory or memory card, remove the camera from its USB cradle before installing the firmware onto the camera. This firmware update cannot be installed while the camera is on the USB cradle.
1) Extract the file you downloaded.
Windows Users
* Double-click the file you downloaded, and it will self-extract. EX-S20U_101.exe extracts to EX-S20.BIN, while EX-M20U_101.exe extracts to EX-M20.BIN.
Macintosh Users
* Use Stuffit Expander or some other similar application to extract the file you downloaded. EX-S20U_101.sit extracts to EX-S20.BIN, while EX-M20U_101.sit extracts to EX-M20.BIN.
2) Place the camera onto its USB cable and establish a USB connection with your computer.
3) Copy the extracted file (EX-S20.BIN or EX-M20.BIN) to the root directory (the top directory on the drive) in camera built-in memory or on a memory card.
Windows
Macintosh
4) Remove the camera from its USB cradle.
5) On your camera, hold down the [MENU] button (Figure 1) as you press the [POWER] button (Figure 2) to turn on the camera. Keep the [MENU] button depressed until the message "PROGRAM UPDATE" (Figure 3) appears on the monitor screen.
(Figure 1)
(Figure 2)
(Figure 3)
6) On the "PROGRAM UPDATE" screen, move the highlighting from [NO] to [YES] by pressing (Figure 4). Next, press the [SET] button (Figure 5).
(Figure 4)
(Figure 5)
7) This starts installation of the update firmware, which is indicated by the message "NOW LOADING" on the camera monitor screen. The message "COMPLETE" (Figure 6) appears when installation is complete.
(Figure 6)
8) After installation is complete, turn off the camera.
9) Check if the firmware version has been updated.
* If you copied the firmware update file (EX-S20.BIN or EX-M20.BIN) directly into camera memory, delete the copied file from camera memory. Next, hold down the camera's [MENU]button as you press the [POWER] button to turn on the camera. Keep [MENU]depressed until the version of your camera's firmware appears on the monitor screen. If "Ver.1.01" appears, it means that firmware update installation was successful.
* If you copied the firmware update file (EX-S20.BIN or EX-M20.BIN) to a memory card, remove the memory card from the camera. Next, hold down the camera's [MENU] button as you press the [POWER] button to turn on the camera. Keep [MENU] depressed until the version of your camera's firmware appears on the monitor screen. If "Ver.1.01" appears, it means that firmware update installation was successful.
Important!
* Before installing the firmware update, be sure you back up the data in camera memory to a memory card or your computer's hard disk.
* Installing the update software can cause changes in the camera's image memory size, camera startup time, recording time, recording interval, user settings, etc.
* If firmware update installation is interrupted due to low battery power, your camera will no longer be able to operate. Be sure to load a fresh set of new batteries into the camera before starting the firmware update installation procedure.
* If you are unable to restart your camera after installing the update software, contact your local Authorized Service Center of Casio distributor or Casio Techno Technical Center. Tell them you need assistance because your camera will not restart after installing EX-S20U or EX-M20U firmware.
* Note that installation of the update software cannot be undone. Once you install the update software, there is no way to restore your camera to its original firmware version.
Company
Casio
Categories
Cameras
Model
Casio EX-S20U
Description
Firmware Update Software for North American customers
Operating System
Windows
Version
1.01
Language Firmware
Feb.2004
Size Driver
1.82MB
File Name
ex-s20u_101.exe
Observations
To install the update software on your camera
• If firmware update installation is interrupted due to low battery power, your camera will no longer be able to operate. Be sure to load a fresh set of new batteries into the camera before starting the firmware update installation procedure.
• After copying the EX-S20.BIN or EX-M20.BIN software to camera built-in memory or memory card, remove the camera from its USB cradle before installing the firmware onto the camera. This firmware update cannot be installed while the camera is on the USB cradle.
1) Extract the file you downloaded.
Windows Users
* Double-click the file you downloaded, and it will self-extract. EX-S20U_101.exe extracts to EX-S20.BIN, while EX-M20U_101.exe extracts to EX-M20.BIN.
Macintosh Users
* Use Stuffit Expander or some other similar application to extract the file you downloaded. EX-S20U_101.sit extracts to EX-S20.BIN, while EX-M20U_101.sit extracts to EX-M20.BIN.
2) Place the camera onto its USB cable and establish a USB connection with your computer.
3) Copy the extracted file (EX-S20.BIN or EX-M20.BIN) to the root directory (the top directory on the drive) in camera built-in memory or on a memory card.
Windows
Macintosh
4) Remove the camera from its USB cradle.
5) On your camera, hold down the [MENU] button (Figure 1) as you press the [POWER] button (Figure 2) to turn on the camera. Keep the [MENU] button depressed until the message "PROGRAM UPDATE" (Figure 3) appears on the monitor screen.
(Figure 1)
(Figure 2)
(Figure 3)
6) On the "PROGRAM UPDATE" screen, move the highlighting from [NO] to [YES] by pressing (Figure 4). Next, press the [SET] button (Figure 5).
(Figure 4)
(Figure 5)
7) This starts installation of the update firmware, which is indicated by the message "NOW LOADING" on the camera monitor screen. The message "COMPLETE" (Figure 6) appears when installation is complete.
(Figure 6)
8) After installation is complete, turn off the camera.
9) Check if the firmware version has been updated.
* If you copied the firmware update file (EX-S20.BIN or EX-M20.BIN) directly into camera memory, delete the copied file from camera memory. Next, hold down the camera's [MENU]button as you press the [POWER] button to turn on the camera. Keep [MENU]depressed until the version of your camera's firmware appears on the monitor screen. If "Ver.1.01" appears, it means that firmware update installation was successful.
* If you copied the firmware update file (EX-S20.BIN or EX-M20.BIN) to a memory card, remove the memory card from the camera. Next, hold down the camera's [MENU] button as you press the [POWER] button to turn on the camera. Keep [MENU] depressed until the version of your camera's firmware appears on the monitor screen. If "Ver.1.01" appears, it means that firmware update installation was successful.
Important!
* Before installing the firmware update, be sure you back up the data in camera memory to a memory card or your computer's hard disk.
* Installing the update software can cause changes in the camera's image memory size, camera startup time, recording time, recording interval, user settings, etc.
* If firmware update installation is interrupted due to low battery power, your camera will no longer be able to operate. Be sure to load a fresh set of new batteries into the camera before starting the firmware update installation procedure.
* If you are unable to restart your camera after installing the update software, contact your local Authorized Service Center of Casio distributor or Casio Techno Technical Center. Tell them you need assistance because your camera will not restart after installing EX-S20U or EX-M20U firmware.
* Note that installation of the update software cannot be undone. Once you install the update software, there is no way to restore your camera to its original firmware version.
Access to Official Website Casio
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.