Available 1 files for Sony USM256F

Select Files
Company
Sony
Categories
backs
Serie
Sony USM Serie
Model
Sony USM256F
Description
Micro Vault Driver
Operating System
Windows 98-98Se
Size Driver
30Mb
File Name
usm_f_software20050512.zip
Observations
1. When using the Micro Vault with Windows Me/2000/XP or Macintosh OS 9.0 and higher, it is not necessary to install this device driver. As soon as the Micro Vault is connected to a USB port on the computer, the computer will recognize the Micro Vault automatically and install the device driver. However, with soMe USB2.0 Cards or boards, manual Installation may be required.
2. The Micro Vault may not function correctly if it is connected to the computer, after the computer is started, restarted, or restored fRom sleep mode. Please disconnect the Micro Vault fRom the computer before performing any of the operation above.
Device Driver for Windows® 98 and 98SE / Fingerprint Access software / Fingerprint Sensor Driver
Download Procedures
1. Create a folder to store the downloaded file.
2. Save the downloaded file (USM_F_Software20050512.zip ) in this folder.
3. When the download is completed, use Windows Explorer to browse to the folder where the file is saved. Click View and click Details. If the file size is the saMe download size as above [30,730KB], the downloading has been completed correctly. If the size is different, please delete the file and download it again.
Installation Procedure
1. After the USM_F_Software20050512.zip file is downloaded, unzip the file. A USM_F_Software20050512 folder appears after the downloaded file is unzipped.
2. Double click the Setup.exe file in the USM_F_Software20050512 folder. An Installation Wizard screen appears.
Step 3 and Step 4 are appliCable only for Windows 98/98SE operating systems.
3. At the Installation Wizardscreen, select Install Win98 Storage Media Driver to install the necessary drivers for Windows 98/98SE.
4. Follow the instructions on screen to complete the drivers Installation
5. Click Install Fingerprint Sensor Driver. Follow the on screen instructions to complete the driver Installation.
6. When the Fingerprint Sensor Driver is installed. Connect the Micro Vault to the computer. (Windows will detect the fingerprint sensor)
7. Click Install Fingerprint Access Software in the Installation Menu.
8. Click Next. The software license agreeMents appears.
9. Read the license agreeMent carefully. Select "I accept the terms in the license agreeMent" to agree and then click Next.
10. Select the check box of the software features for Installation.
11. Click Next. Read the information carefully and click Next. The finger selection screen appears.
12. Click the finger on screen to register the fingerprint and then click Next. (The fingerprint capture screen appears)
Note: If this is not the first tiMe installing the software and a registered fingerprint already exist, an identity confirmation screen appears.
13. Place the finger that you selected in step 12 on the fingerprint sensor.
14. Click Finish. The password and nicknaMe input screen appears.
15. Type all the necessary information, and then click Next. (The last screen of the Installation wizard appears)
16. Click Finish to close the Installation wizard.
The fingerprint access feature is now available for usage.
2. Save the downloaded file in this folder.
3. When the download is completed, use Windows Explorer to browse to the folder where the file is saved. Click Views and click Details . If the file size is the saMe download size as above [1.38MB (1.40MB)], the downloading has been completed correctly. If the size is different, please delete the file and download it again.
Installation Procedure
1. Install the program to any location on the computer.
2. Remove the cap fRom the Micro Vault and connect the Micro Vault to the computer's USB port.
3. When the New Hardware wizard starts, click the Next button.
4. Click Specify a location and click the Browse button. When the dialog box appears, specify the folder where the Installation program is stored and click the OK button to close the dialog box. Click the next button.
5. Ensure that the Sony Storage USB Driver is displayed and click the Next button.
6. Click the Finish button.
7. When the next New Hardware wizard starts, click the Next button.
8. Click Specify a location and click the Browse button. When the dialog box appears, specify the folder where the Installation program is stored, click the OK button to close the dialog box, and then click the next button.
9. Ensure that the Sony Storage Device Disk Driver is displayed and click the Next button.
10. Click the Finish button.
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.