Emulex LP10000 Networks Cards > Downloads Drivers, Manual and Firmware

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Universal Boot

Operating System

Boot Code

Version

5.02a1

Size Driver

199KB

File Name

tu502a1.zip

Observations

Contains: x86 BootBIOS version 1.71a0, OpenBoot version 1.50a9 and EFI Boot 3.11a5 This Universal Boot version 5.02a1 contains:

(1) x86 BootBIOS version 1.71a0
(2) OpenBoot version 1.50a9
(3) EFIBoot version 3.11a5

For detailed information about x86 BootBIOS, please refer to section II below,
for OpenBoot, section III, and for EFIBoot, section IV. This Universal Boot can
boot on either Intel x86 Platform, Non-Intel Fcode, or EFI environment. In other
words, the platform is transparent and the user should not be concerned with any
differences with regard to x86 BootBIOS, OpenBoot, or EFIBoot.

Universal Boot is a complete image, whenever it is enabled by any Emulex OS
utility, the whole image (x86 BootBIOS, OpenBoot and EFIBoot) is enabled. This
is also true for disable.
Files included in this release:

\502a1.txt this file you are reading
\HU502a1.PRG LP9802 Universal Boot
\TU502a1.PRG LP10000 Universal Boot
\BU502a1.PRG LP11000 Universal Boot
\ZU502a1.PRG LPe11000 Universal Boot
\elxcli311a5.efi EFI 3.11a5 Driver
Universal Boot Load Procedure

The Light Pulse Universal Boot is distributed as a .PRG file. This file may be
downloaded to the Adapter using the firmware upgrade procedure with the following
Utility in Various systems.

1. "Drvcfg" : EFI based Systems.

Please refer to section 4 in EFIBoot for user interface how to download
Universal Boot in EFI based systems.

2. LP6DUTIL.EXE : DOS based utility.

Please refer to the LP6DUTIL version 9.0a13, or later, documentation for user
interface how to download EFIBoot in DOS PCI systems.

3. LPUTILNT : Windows Miniport Driver.

Please refer to the utility user manual for details on using the above tool.

4. Emulex Configuration Tool : Windows Port Driver.

Please refer to the elxcfg user manual for details on using the above tool.

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Firmware

Operating System

Firmware

Version

1.91a5

Size Driver

330KB

File Name

td191a5.zip

Observations

Compatibility:

This kit supports the LP10000, LP10000DC and LP10000ExDC
PCI host adapters.

This kit includes the following files:

README.TXT The file you are reading

TD191A5.ALL All firmware components, no boot code

LP6DUTIL.EXE DOS-based diagnostic utility 9.3a6
LP6DUTIL.DOC LP6DUTIL diagnostic utility document
SAMPLESCRIPT.TXT An example script for LP6DUTIL 9.3a6
Changes and Corrections:

-- Changes and corrections between 1.91a5 and 1.91a4:

Ensure proper DMA behavior upon channel reset. (CR 19091, 19096)

Pre-initialize configuration region to avoid errors if host reads it
before the initial configuration is complete. (CR 19177, 19187, 19188)

-- Changes and corrections between 1.91a4 and 1.91a3:

Several issues with FLASH access during reset of only one port have been
eliminated by synchronizing the flash access speed of both ports.
(CR 17472, 17475, 17539, 17542, 17625, 17626, 17647, 17648, 18212,
18213, 18307)

An exceptionally rigorous test produced a timeout where the rings other
than ring 0 were ignored. The firmware has been corrected to check all
four rings. (CR 15952, 16262, 16279, 16280, 16281, 16282, 16283)

Improved handling of queued data from tape. Recovery of CRC errors
no longer indirectly trigger an abort on slow PCI environments.
(CR 17410, 17510, 17520, 17608, 17610, 17633, 17634, 17635, 18280,
18343)

Changed handling of dropped FCP-2 tape data frames. Upon detecting a
missing frame, the firmware now automatically requests a retransmission
from the drive. (CR 14851, 15184, 16975, 18329)

The firmware now correctly handles intentional IOCB starvation.
(CR 16818, 16873, 16972, 17211)

An I/O timeout during tape operation was eliminated by delaying
processing of any FCP2 errors during discovery. (CR 17363, 18287, 18288)

Improved handling of linked FCP commands in order to avoid timeouts.
(CR 15602, 16114)

Implemented a workaround to avoid a hardware DMA overrun condition.
(CR 17780, 17834, 17908)

To avoid buffer deadlocks, the HBA now completes any existing DMA for
an exchange prior to allocating more free buffers. (CR 16862, 16874,
16973, 18347)

Dump command now correctly dumps memory above 1MB. (CR 18374)

Improved buffer handling logic during error conditions to avoid aborted
exchanges. (CR 17701, 18291, 18292, 18349)

Improved handling of erroneously-sized ECHO responses. (CR 18330,
18332, 18333)

The HBA now transmits all outstanding ACKs before processing any
previously blocked data. (CR 16354, 18334, 18335)

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Basic Troubleshooting Manual

Information

Hardware Manuals

Operating System

Manual

Size Driver

157KB

File Name

troubleshooting_basic.pdf

Observations

Emulex Product Installation, Upgrades, and Configuration
Installing, upgrading and configuring Emulex products can be easily accomplished by following the checklists provided at the end of this document.
A word about Emulex configuration parameters:
Emulex drivers and software provide a great degree of configurability. In particular, each driver has a number of configuration parameters that allow the customization of the behavior of the driver. Because these parameters can significantly change the behavior of the Emulex product, great care must be taken in the setting of the parameters. Storage and system providers put forth great effort in determining what particular configuration parameters must be set to in order to provide optimal SAN performance.
For best results, never change the driver configuration parameters from their default values or the values that are specified by the storage and systems providers. Doing so can alter to performance of the SAN and possibly place the SAN in a configuration that is not supported or cause it not to operate properly.
How Emulex device driver configuration parameters work
It is very important to understand that Emulex configuration parameters are stored in the server in which the HBA is installed into. The parameters are acted upon by the device driver. Emulex configuration parameters are NOT stored in the HBA flash memory. Unlike some other SCSI and Fibre Channel HBAs, Emulex does not store any configuration information such as timers, Fibre Channel topology or link speed in the HBA flash. When an Emulex HBA is installed into a server, there is no separate configuration step required for the HBA. Proper driver configuration is all that is required. The exception is booting from SAN. In this case, the HBA BIOS utility must be used to configure the boot device. Said differently, the HBA must be told which Fibre Channel device contains the boot volume, and that information is stored in the flash. These settings are only in effect at boot time. Once the operating system loads the device driver, most settings of the driver are used and the HBA BIOS no longer functions.

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Boot Code Update Manual

Information

Boot Code

Operating System

Manual

Size Driver

4.9MB

File Name

bootcode.pdf

Observations

Introduction..............................................................................................................1
Emulex Boot Code Files....................................................................................1
Boot from SAN.........................................................................................................2
Windows Server 2008 and Windows Server 2003.............................................2
Configure Boot from SAN on Windows Server 2008 and Windows Server 2003 (x86 and x64)..........................................................2
Configure Boot from SAN on Windows Server 2008 and Windows Server 2003 (Itanium)..................................................................3
New Installation of Windows 2008 UEFI- Aware Operating System
on a UEFI-based x64 Server.................................................................3
Direct a UEFI-Based Server to a Windows Server 2008 OS Image (Installed as UEFI-Aware) Already Installed on the SAN.......................4
The GUID Partition Table......................................................................4
Install Windows Server 2008 on an FC Boot Disk (x86, x64 and Itanium)...5
Install Windows Server 2003 on an FC Boot Disk (x86, and x64
and Itanium)................................................................................................6
Linux and VMware.............................................................................................7
Configure Boot from SAN on Linux or VMware (x86 and x64).....................7
Configure Boot from SAN on Linux (PowerPC)...........................................7
Configure Boot from SAN on Linux (Itanium)..............................................7
Solaris...............................................................................................................8
Configure Boot from SAN on Solaris SFS (x86 and x64)............................8
Determine LUNs to Select for Boot from SAN.......................................8
Configure Boot from SAN on Solaris SFS (SPARC)....................................8
Configure Boot from SAN on Solaris LPFC (SPARC)..................................9
Install Solaris from a Network Image..................................................10
Install Solaris by Migrating an Image from a Local SCSI Disk.............11
Install, Update and Enable Boot Code...................................................................14
BIOS Utility............................................................................................................15
Start the BIOS Utility.................................................................................15
Enable an Adapter to Boot from SAN........................................................17
Configure Boot Devices...................................................................................17
Configure Adapter Parameters........................................................................21
Change the Default AL_PA (Arbitrated Loop Physical Address)................22
Change the PLOGI Retry Timer................................................................23
Change Topology......................................................................................24
Enable or Disable the Spinup Delay..........................................................25
Set Auto Scan...........................................................................................26
Enable or Disable EDD 3.0.......................................................................27
Enable or Disable the Start Unit Command...............................................28
Enable or Disable the Environment Variable.............................................29
Enable or Disable Auto Boot Sector..........................................................30
Change Link Speed...................................................................................31
Reset to Default Values.............................................................................32
Use Multi-Path Boot from SAN..................................................................33
OpenBoot..............................................................................................................34
Attribute Commands.................................................................................34
Functional Commands..............................................................................35
EFIBoot.................................................................................................................37
Install the EFI Utility..................................................................................37
Start the EFI Utility....................................................................................38

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Manual Installation, Configuration and Troubleshooting for Windows Server 2003

Information

Windows 2000-2003

Operating System

Manual

Version

5.10a10 32-Bit

Size Driver

2.8MB

File Name

manual_ws3.pdf

Observations

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Quick Install

Information

Windows 2003

Operating System

Manual

Version

1.10a4 32/64-bit

Size Driver

498KB

File Name

quick_installation.pdf

Observations

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Manual

Information

Windows 2003

Operating System

Manual

Version

1.20a7

Size Driver

3.6MB

File Name

storport120manual.pdf

Observations

Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note The KB916048 update to the Microsoft Storport driver is required.
Installation, Configuration and Troubleshooting (3,264 KB)

Introduction.............................................................................................................. 1
Important Considerations......................................................................................... 2
Changing Driver Types...................................................................................... 2
Microsoft Storport Driver Update ....................................................................... 2
Updating the Storport Miniport Driver Using AutoPilot Installer.......................... 2
Definitions................................................................................................................ 2
Storport Miniport Driver Information ......................................................................... 3
Prerequisites ..................................................................................................... 3
Compatibility...................................................................................................... 3
New in This Release ......................................................................................... 3
Known Issues .................................................................................................... 3
Files Included in this AutoPilot Installer ............................................................. 4
Distribution Executable File Overview ..................................................................... 5
Running the Distribution Executable File ........................................................... 5
AutoPilot Installer..................................................................................................... 6
Introduction ....................................................................................................... 6
Prerequisites ............................................................................................... 6
AutoPilot Installer Features ......................................................................... 6
Configuration Questions.............................................................................. 6
Installation Planning .......................................................................................... 6
AutoPilot Installation Procedures ............................................................................. 7
Hardware-First Installation................................................................................. 7
If the Installation Fails ................................................................................. 8
Software-First Installation .................................................................................. 8
Installing the HBAnyware Security Configurator ...................................................... 9
Unattended Installation .......................................................................................... 10
AutoPilot Configuration File Format................................................................. 10
Mandatory Configuration File Changes ........................................................... 10
Deleting Questions in the APInstall.cfg File ..................................................... 11
Optional Configuration File Changes............................................................... 11
Setting Up Driver Parameters.......................................................................... 14
Setting Up System Parameters ....................................................................... 14
Unattended Error Codes Reference Table....................................................... 14
Invoking AutoPilot Installer .............................................................................. 15
Batch File Example ......................................................................................... 15
Manually Installing or Updating the Storport Miniport Driver .................................. 17
Overview ......................................................................................................... 17
Removing the Adjunct Driver Registry Key...................................................... 17
Manually Installing the Emulex PLUS (ElxPlus) Driver .................................... 17
Manually Updating the Emulex PLUS (ElxPlus) Driver .................................... 18
Manually Installing or Updating the Storport Miniport Driver ............................ 19
Manually Installing the Driver Utilities .............................................................. 20
Uninstalling the Utility Package ....................................................................... 20
Uninstalling the Emulex Drivers....................................................................... 22
Configuration ...........................................................................................................23
Introduction............................................................................................................ 23
Starting HBAnyware from the Desktop ............................................................ 24

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Manual Installation, Configuration and Troubleshooting for Windows 2000 Server

Information

Windows 2000-2003

Operating System

Manual

Version

5.10a10 32-Bit

Size Driver

2.9MB

File Name

manual_w2k.pdf

Observations

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Manual

Information

Windows 2003

Operating System

Manual

Version

1.11x1 32/64-bit

Size Driver

2.7MB

File Name

manual.pdf

Observations

Qualification: The Storport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms and Windows Server 2003 x64 Editions. The 64-bit Itanium Storport Miniport driver is also Microsoft WHQL qualified and digitally signed for Windows Server 2003, Datacenter Edition.
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Manual

Information

Windows 2003

Operating System

Manual

Version

1.10a4 32/64-bit

Size Driver

2.8MB

File Name

manual.pdf

Observations

Qualification: The Storport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 and Windows Server 2003, Datacenter Editions on x86, x64 and Itanium 64-bit platforms.
If you are not using Windows Server 2003 Service Pack 1 or KB891793 is required.
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Manual

Information

Windows 2000-2003

Operating System

Manual

Version

5.30a2

Size Driver

4.3MB

File Name

manual.pdf

Observations

Qualification: The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms. The 64-bit Itanium SCSIport Miniport driver is also Microsoft WHQL qualified and digitally signed for Windows Server 2003, Datacenter Edition. The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Manual

Information

Windows 2003

Operating System

Manual

Version

1.02a5 64-bit

Size Driver

1.7MB

File Name

set.pdf

Observations

Qualification: The 64-bit Storport Miniport driver is Microsoft WHQL qualified for both Windows Server 2003 and Windows Server 2003, Datacenter Edition.
Note KB891793, which updates Microsoft's storport.sys file, is required.
Installation, Configuration and Troubleshooting (1,821 KB)

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Manual

Information

Windows 2000-2003

Operating System

Manual

Version

5.20a10 64-Bit

Size Driver

2.9MB

File Name

manual.pdf

Observations

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Manual

Information

Solaris 2.6-7-8-9-10

Operating System

Manual

Version

6.02h

Size Driver

2.7MB

File Name

manual.pdf

Observations

Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Manual

Information

Windows 2000-2003

Operating System

Manual

Version

5.10a10 64-Bit

Size Driver

2.8MB

File Name

manual_ws3.pdf

Observations

Qualification: The 64-bit SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for both Windows Server 2003 and Windows Server 2003, Datacenter Edition.
Note New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these
Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note The installation procedure for the driver and utilities has changed from earlier versions. For installation information, see the online Installation manual.
Installation, Configuration and Troubleshooting (2,869 KB)

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Manual

Information

HP-UX

Operating System

Manual

Version

5.31.09

Size Driver

1.3MB

File Name

manual.pdf

Observations

64-bit Itanium Processor Family: Provides SCSI functionality over Fibre Channel arbitrated loops and fabric topologies.
OS Version: HP-UX 11iv2 (11.23)
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Manual

Information

HP-UX

Operating System

Manual

Version

4.31.09 (PA-RISC)

Size Driver

1.8MB

File Name

manual.pdf

Observations

HP-UX 11iv2 (11.23)
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Installation Manual

Information

Hardware Manuals

Operating System

Manual

Size Driver

364KB

File Name

install_lp10000.pdf

Observations

Table of ContentsInstallationFeaturesCompatibilityPrerequisitesSet JumpersInstall HBAAttach MediaApply PowerView LEDsReferenceSpecificationsFCC StatementDeclaration of ConformityLaser Safety

Features
The LP10000 host bus adapter offers a highly integrated 2Gb/s Fibre Channel HBA for use in servers based on either the conventional PCI or PCI-X 1.0a expansion bus architectures. The LP10000 delivers exceptional performance through the use of a sixth generation Emulex Thor controller. The Thor high-performance controller is a highly integrated device that combines industry standard embedded ARM9 processors, 1Gig/2Gig SERDES and protocol technology into a single module. The LP10000 is a single-channel HBA in a low-profile PCI (MD2) compliant card format.
Major Features
l
Full duplex 2Gb/s Fibre Channel delivering up to 400MB/s
l
Superior transaction processing performance
l
Automatic speed negotiation
l
Automatic topology detection
l
Full fabric support using F_Port and FL_port connections
l
Onboard hardware context cache for superior fabric performance
l
Support for use of multiple concurrent protocols (SCSI and IP)
l
Full support for both FC service class 2 and 3
l
Full fabric support in x86, Itanium and SPARC environments
l
Support for FC-Tape (FCP-2) devices
l
66/100/133 MHz PCI-X 1.0a and PCI 2.3 compatibility
l
End-to-end parity protection for high data integrity
l
Robust suite of software supporting Windows Server 2003, Windows 2000, Windows NT, Linux, NetWare and Solaris
l
3.3V signaling, 5V tolerant
l
Optical small form factor (LC) interface

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Driver Kit

Operating System

Solaris 2.6-7-8-9-10

Version

6.02h

Size Driver

12MB

File Name

solaris-2.1a18-6.02h-1a.tar

Observations

Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Base driver, HBAnyware utility 2.1a18, HBAnyware Security Configurator 2.1a18 and lputil 2.0a9

HBAnyware 2.1a18 Solaris Installation Instructions

Dependencies:

lpfcdriver 6.02c, or later
hbaapi 2.0e

Java Runtime Environment

Version 1.4 or later of the Java Runtime Environment (JRE) must
be installed. HBAnyware will not run under earlier versions of
the JRE.

HBAnyware and hbacmd currently will not run under Solaris 6.

The JRE and instructions for installation can be found at http://java.sun.com/downloads/index.html

JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be included in the PATH
environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include this path
in your PATH environment variable. (bash> export PATH="$PATH:/usr/java/bin")

HBAnyware is dependant on lpfcdriver being installed, so install lpfcdriver first if it is not already installed.

1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Copy the HBAnyware-2.1a18-sparc.tar.gz file to a directory on the install machine
3. cd to the directory which you copied the tar file
4. Unzip the file: gunzip HBAnyware-2.1a18-sparc.tar.gz
5. Untar the file: tar -xvf HBAnyware-2.1a18-sparc.tar
6. Run the pkgadd routine: pkgadd -d .
7. When prompted by pkadd, choose to install HBAnyware
Running the HBAnyware GUI

1. su to root
2. Run the script /usr/sbin/hbanyware/hbanyware
Helpful scripts

/usr/sbin/hbanyware/stop_hbanyware - This script will stop all HBAnyware daemons and GUIs.
Run this if you need to unload the driver.

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Driver Kit

Operating System

Windows 2000-2003

Version

5.20a10 64-Bit

Size Driver

13.8MB

File Name

scsiportminiportkit_5-20a10-1a.exe

Observations

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Driver Kit

Operating System

Windows 2000-2003

Version

5.30a2

Size Driver

18.4MB

File Name

scsiportminiportkit_5-30a2-1d.exe

Observations

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Driver Kit 32-bit

Operating System

Windows 2000-2003

Version

5.10a10 32-Bit

Size Driver

5.2MB

File Name

scsiport-5-5.10a10-sp1.zip

Observations

Qualification: The 32-bit SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003, and it is Microsoft WHQL qualified and digitally signed for Windows 2000 Server The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.

This kit contains the following components:

ns5510a10sc.zip - Emulex Fibre Channel SCSIport Miniport Driver
EmlxApps20a21-SP1.zip - Emulex Applications kit
readme.first.txt - this file

The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.

The installation for the Emulex Applications Kit has been updated
to install the hbaapi.dll file in the Emulex utilities directory
to be compatible with Windows Server 2003 Service Pack 1.

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the Emulex Driver Kit listed above.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
Applications Kit listed above.

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Driver Kit 64-bit

Operating System

Windows 2000-2003

Version

5.10a10 64-Bit

Size Driver

6.1MB

File Name

scsiport-6-5.10a10-sp1.zip

Observations

Qualification: The 64-bit SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for both Windows Server 2003 and Windows Server 2003, Datacenter Edition.

This kit contains the following components:

ns6510a10dc.zip - Emulex Fibre Channel SCSIport Miniport Driver
Emlx64Apps20a21-SP1.zip - Emulex Applications kit
readme.first.txt - this file

The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.

The installation for the Emulex Applications Kit has been updated
to install the hbaapi.dll file in the Emulex utilities directory
to be compatible with Windows Server 2003 Service Pack 1.

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the Emulex Driver Kit listed above.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
Applications Kit listed above.

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Driver Kit 64-bit

Operating System

Windows 2003

Version

1.02a5 64-bit

Size Driver

6.7MB

File Name

storport-6-1.02a5-1d.zip

Observations

Qualification: The 32-bit Storport Miniport driver is Microsoft WHQL qualified for both Windows Server 2003 and Windows Server 2003, Datacenter Edition.
Note KB891793, which updates Microsoft's storport.sys file, is required.
Base driver, HBAnyware utility 2.0a20 and lputilnt version 1.7a20

This kit contains the following components:

elxstorinstall5102a5c.zip - Emulex Fibre Channel Storport Miniport Driver
EmlxApps20a20-1a.zip - Emulex Applications kit
readme.first.txt - this file

The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
relnotes.doc file included in the elxstorinstall5102a5c.zip package.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the
EmlxApps20a20-1a.zip package.

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Driver Kit 32-bit

Operating System

Windows 2003

Version

1.02a5 32-bit

Size Driver

5.6MB

File Name

storport-5-1.02a5-1d.zip

Observations

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Driver Kit

Operating System

Windows 2003

Version

1.10a4 32/64-bit

Size Driver

14.6MB

File Name

storportminiportkit_1-10a4dc-2e.exe

Observations

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Driver Kit

Operating System

Windows 2003

Version

1.11x1 32/64-bit

Size Driver

15.1MB

File Name

storportminiportkit_1-11x1-1a.exe

Observations

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for HP

Model

Emulex LP10000

Description

Driver Kit

Operating System

Windows 2003

Version

1.20a7

Size Driver

17.9MB

File Name

storportminiportkit_1-20a7-1d.exe

Observations

Access to Official Website Emulex

Home English Drivers English

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 32 files for Emulex LP10000

Select Files