Jaton 3Dforce S-16-32 Download Drivers

[Version]
Signature="$CHICAGO$"
Class=Modem
ClassGUID={4D36E96D-E325-11CE-BFC1-08002BE10318}
Provider=%Oem%
CatalogFile=Intels51.cat
DriverVer=05/10/2002, 4.43.1

;----------------------------------------------------------------------------
;
; Modifiable strings used by this INF file
;
;----------------------------------------------------------------------------
[Strings]
Oem = "Intel Corporation"
ModemName = "Intel(R) 536EP V.92 Modem"
InstDiskName = "Intel(R) 536EP Installation Disk"
ModemHardwareID = "PCI\VEN_8086&DEV_1040&SUBSYS_10008086&REV_00, PCI\VEN_8086&DEV_1040"

;----------------------------------------------------------------------------

[Manufacturer]
%Oem% = Oem

[DestinationDirs]
CopyFileSection = 12
DefaultDestDir = 12

[SourceDisksNames]
1=%InstDiskName%,,

[SourceDisksFiles]
Intels51.sys=1
[CopyFileSection]
Intels51.sys,,,2

[ControlFlags]
ExcludeFromSelect=PCI\VEN_8086&DEV_1040
ExcludeFromSelect=PCI\VEN_8086&DEV_1040&SUBSYS_10008086&REV_00

[Oem]
%ModemName% = Intels51, PCI\VEN_8086&DEV_1040&SUBSYS_10008086&REV_00, PCI\VEN_8086&DEV_1040

[Intels51.NT]
AddReg = Modem.AddReg,Intels51.AddReg,Voice.AddReg
CopyFiles = CopyFileSection

;----------------------------------------------------------------------------
; install modem driver as a service under services\%ModemName%
; refers to lower section for details of service key entry
;----------------------------------------------------------------------------
[Intels51.NT.Services]
AddService = Intels51, 0x00000000, Intels51_Service_Inst, Intels51_EventLog_Inst

;----------------------------------------------------------------------------
; type=kernel driver start=manual, pnp will start
;----------------------------------------------------------------------------
[Intels51_Service_Inst]
DisplayName = %ModemName%
ServiceType = 1
StartType = 3
ErrorControl = 1
ServiceBinary = %12%\Intels51.sys
LoadOrderGroup= Base
AddReg = Intels51_Service_Inst_Addreg

[Version]
Signature = "$CHICAGO$"
Class = Modem
ClassGUID = {4D36E96D-E325-11CE-BFC1-08002BE10318}
Provider = %Oem%
DriverVer=05/10/2002, 4.43.1

;----------------------------------------------------------------------------
;
; Modifiable strings used by this INF file
;
;----------------------------------------------------------------------------
[Strings]
Oem = "Intel Corporation"
;Oem = "Your Company Name"
ModemName = "Intel(R) 536EP V.92 Modem"
;ModemName = "Your Modem Name"
CurrentCountry = 1

;do not edit ServiceName
ServiceName = "Intels"
;----------------------------------------------------------------------------

[Manufacturer]
%Oem% = Oem

[Oem]
%ModemName% = Intels, ROOT\UNIMODEM74ED5A83, UNIMODEM74ED5A83
%ModemName% = Intels, ROOT\UNIMODEM74ED5A83\COM1, UNIMODEM74ED5A83
%ModemName% = Intels, ROOT\UNIMODEM74ED5A83\COM2, UNIMODEM74ED5A83
%ModemName% = Intels, ROOT\UNIMODEM74ED5A83\COM3, UNIMODEM74ED5A83
%ModemName% = Intels, ROOT\UNIMODEM74ED5A83\COM4, UNIMODEM74ED5A83
%ModemName% = Intels, ROOT\UNIMODEM74ED5A83\COM5, UNIMODEM74ED5A83
%ModemName% = Intels, ROOT\UNIMODEM74ED5A83\COM6, UNIMODEM74ED5A83
%ModemName% = Intels, ROOT\UNIMODEM74ED5A83\COM7, UNIMODEM74ED5A83
%ModemName% = Intels, ROOT\UNIMODEM74ED5A83\COM8, UNIMODEM74ED5A83

[Intels.NT]
AddReg = Modem.AddReg, Intels.AddReg, Service.AddReg

;----------------------------------------------------------------------------
; Service Registry Sections
;
; The [Service.Reg] section has settings the Intels service will use.
;
;----------------------------------------------------------------------------
[Service.AddReg]
HKLM,SYSTEM\CurrentControlSet\Services\%ServiceName%\Parameters,DeviceDesc,,"%ModemName%"
HKLM,SYSTEM\CurrentControlSet\Services\%ServiceName%\Parameters,Mfg,,"%Oem%"

;Uncomment the following line if Handset Hook detection is not supported
;HKLM,SYSTEM\CurrentControlSet\Services\%ServiceName%\Parameters, gpio_lpohd, 1, 0

;Control V92 Reporting
; 1 = quickconnect, pcm upstream, & modem on hold
; 0 = pcm upstream only
HKLM,SYSTEM\CurrentControlSet\Services\%ServiceName%\Parameters, v92rptopt, 1, 1

Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
9) Disclaimers

--------------
1. Quick Start
--------------

1) This version of SmartUSB56 drivers is only compatible with
Microsoft Windows XP and Windows 2000.

2) If any type of Smart Link modem is already installed in your
system and you want to update its' device driver, first
uninstall existing drivers (See Uninstall Procedure), and only
then proceed to install the new drivers.
To install your modem drivers for the first time:
-------------------------------------------------
a) Plug in the modem into a USB port.

b) Windows will instantly detect the modem and will start software
installation.

c) When requested, point to the drivers installtion directory on
the floppy disk or CD-ROM.

d) Modem drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------

To verify that the modem is installed correctly, follow these steps:

a) Click "Start > Settings > Control Panel > Modem": check for the
presence of a "SmartUSB56 Modem".

b) In "Control Panel > Modems > Properties > Diagnostics" click on
"Query Modem" button and check that the modem responds.

To Check that the modem is working properly:

a) Open "Hyper Terminal".
b) Select the "SmartUSB56 Modem" or "Direct to port" option.
c) Type ATI1, ATI2 or ATI3 and make sure you receive the modem IDs.
Dial any accessible phone number, and see that that phone rings.
Dial to another modem (ATDTxxx or via the dial button of the
TAPI interface) and see that a modem session is established.

If you have successfully connected, then the modem has been
successfully installed.
----------------------
3. Uninstall Procedure
----------------------
a) Click "Start > Settings > Control Panel > Add/Remove Programs".

b) Select "SmartUSB56 Modem".

c) Click the "Add/Remove" button.

d) Modem drivers will be uninstalled. You may un-plug the modem
from the USB port.