Intergraph RealiZm Z13-Z25 Download Drivers

Available 1 files for RealiZm Z13-Z25
Company
Intergraph
Categories
Graphics cards
Model
Intergraph RealiZm Z13-Z25
Description
Drivers
Operating Systems
Windows NT4-2000-XP
Size Driver
829Kb
File Name
dec_pwrstr40.zip
Info
The Intergraph RealiZm Display Driver utilizes the Intergraph
RealiZm display adapter on the TD class of workstations.
This driver will not run on the Intergraph 433, 466, or any
other machine which does not have PCI backplane hardware.

See MANIFEST.TXT for list of delivered files.

To retrieve this version of the Intergraph RealiZm Display
Driver, use the floppy provided or insert a blank formatted
floppy into drive A: and copy all files listed in the
MANIFEST.TXT file onto the floppy.
WINDOWS NT 4.0 SETUP - PLEASE READ CAREFULLY!
---------------------------------------------

1) Log into the system as using an account that has
Administrator privileges.

2) To select the Intergraph RealiZm Display Driver, select
the Display icon of the Control Panel.

3) Choose the "Settings" Tab.

4) Select the "Display Type" button.

5) Select the "Change" button.

6) Select the "Have Disk" button.

7) A dialog will appear asking for the full path for the OEM
display driver files. The default path given will be A: Select 'OK' when ready.

8) A dialog will appear indicating the driver to be loaded. The
selection should be "Intergraph RealiZm Z13/Z25". Choose OK.

9) A dialog will appear asking to proceed with the third party
driver installation. Choose "YES".

10) A dialog box should appear telling that the drivers were
successfully loaded. Select "OK."

11) Select the "Close" button on the "Display Type" dialog.

12) Select the "Close" button on the "Display Properties" dialog.

13) A final dialog box pops up at this point with the message
that the display settings have changed and restarting
Windows NT will be necessary for the new settings to take
effect. If you have an Intergraph InterVue monitor then
select "No" and change the monitor type per the following
instructions. Otherwise, select "Yes".

13a) Re-select the Display icon of the Control Panel

13b) Select the "Hardware Settings" Tab and choose the
Intergraph InterVue monitor.

13c) Select the "Close" button on the "Display Properties"
dialog.

13d) Reboot the system.

NOTE: Remember to eject floppy before shutdown.

14) The Intergraph RealiZm Display Driver will be loaded during
system boot but will only be in 1024 x 768 resolution. After
logging on, the resolution can be changed in the "Display
Properties" dialog.
HelpDrivers Since March 2000