Genius AGP I740 Download Drivers

Available 5 files for AGP I740
Company
Genius
Categories
Graphics cards
Model
Genius AGP I740
Description
Drivers
Operating Systems
Windows 3.x
Version Driver
1
Size Driver
842Kb
File Name
i740-win31.exe
Info
1.0 Introduction
2.0 Release Notes
3.0 Intel740(tm) Graphic Accelerator Driver Installation Procedure
4.0 Web Site Location and Access


**********************************************************************
1.0 Introduction
**********************************************************************
This README file contains the installation procedure and usage
information for the Intel740(tm) graphics accelerator software.
The software and hardware requirements for this release are as follows:

## Software Drivers (SDR) Version: 1.4.7 , 6555X, 69K I740
## Operating System: Windows* 3.11
## Video BIOS version: 206, 208, 212
## Intel740 graphics accelerator stepping A2

----------------
Version number
----------------
## Driver Release Version # 1.4.7
Video BIOS/Driver compatible combination
VIDEO BIOS
----------
VB206
VB208
VB212

The Intel740(tm) graphics accelerator is optimized to run with the
following PC configurations:
(1) Processor: Intel(R) Pentium(R)II processors
(2) Motherboard: Based on the Intel(R) 440LX, 440BX, 440GX AGPset
or a later generation Intel AGPset, motherboard must have an
unpopulated AGP slot or the Intel740 chip must be down on the
motherboard
(3) Operating System: Windows* 3.11

**When loading the Intel740 drivers and Windows* 3.11 for the
first time, the software should be loaded in the following order:
(1) Load Windows* 3.11.
(2) Load the Intel740(tm) drivers.

Note: If this is not done in this order, then the Intel740 drivers
will not be loaded properly and the standard Microsoft VGA drivers
will be loaded instead.

Also included are release notes describing any problems or issues that
were known at the time of shipment.
**********************************************************************
2.0 Release Notes
**********************************************************************

---------------------------------------------
Production Version: 1.4.7 , 6555X, 69K, i740
Release Date: October 21, 1998
---------------------------------------------
The follwing Beta Version issues were resolved:

1. Fixed the Corel5 24 bits per pixel stretch bitblt problem.
2. Fixed the DOS Box to DOS full screen I740 flickering problem.
3. Fixed the I740 full screen DOS lockup problem in 1280x1024x8.
4. Changed Copyright from Chips and Technologies, Inc. to
Copyright (c) Chips and Technologies. A Subsidiary of Intel Corporation
5. Added control panel logo support for Intel740(TM).
Company
Genius
Categories
Graphics cards
Model
Genius AGP I740
Description
Drivers
Operating Systems
Windows 95 OSR 2
Version Driver
1
Size Driver
1Mb
File Name
i740-osr2.exe
Info
1.0 Introduction
2.0 Release Notes
3.0 Intel740(tm) Graphic Accelerator Driver Installation Procedure
4.0 Web Site Location and Access


**********************************************************************
1.0 Introduction
**********************************************************************
This README file contains the installation procedure and usage
information for the beta Intel740(tm) graphics accelerator
software, and latest version of DirectX*. The software and hardware
requirements for this release are as follows:

## Software Drivers Beta (SDR) Version: PV2.1
## Windows* 95 Version: OSR2.1 or 2.5**
## Windows* 98 Version: RCO (1691)
## DirectX* 5.0 Version: RC2-Gold (4.05.01.1650)
## Indeo CODEC 4.4, 4.5
## Video BIOS version: 212, 220, 230
## Intel740 graphics accelerator stepping A2

----------------
Version number
----------------
## Driver Release Version #
PV1.0 4.10.01.1516-980316
PV1.0a 4.10.01.1526-980326
PV1.5 4.10.01.1701-980501
PV2.0a 4.10.01.1915-980715
PV2.1 4.10.01.1927-980727
Video BIOS/Driver compatible combination
VIDEO BIOS PV 1.0 PV1.0a PV 1.5 PV 2.0a PV 2.1
---------- ------ ------ ------ ------- ------
VB212 yes yes yes yes yes
VB220 no no yes yes yes
VB230 no no no yes yes
The Intel740(tm) graphics accelerator is optimized to run with the
following PC configurations:
(1) Processor: Intel(R) Pentium(R)II processors
(2) Motherboard: Based on the Intel 440LX, 440BX, 440GX AGPset or a
later generation Intel AGPset, motherboard must have an
unpopulated AGP slot or the Intel740 chip must be down on the
motherboard
(3) Operating System: Windows* 95 OSR 2.1 or later (with USB
Supplement), Windows* 98, or Windows NT* 4.0 SP3 or later

**When loading the Intel740 drivers and OSR2.1 or OSR 2.5 for the
first time, the software should be loaded in the following order:
(1) Load OSR2.0 or OSR 2.5
(2) Load the "USB Supplement" (brings it up to OSR2.1 level or
OSR2.5)
(3) Load the Intel740(tm) drivers.
Note: If this is not done in this order, then the Intel740 drivers
will not be loaded properly and the standard Microsoft VGA drivers
will be loaded instead.

Also included are release notes describing any problems or issues that
were known at the time of shipment.
Company
Genius
Categories
Graphics cards
Model
Genius AGP I740
Description
Drivers
Operating Systems
Windows NT 3.51
Version Driver
1
Size Driver
102Kb
File Name
i740-nt35.exe
Info
1.0 Introduction
2.0 Release Notes
3.0 Intel740(tm) Graphic Accelerator Driver Installation Procedure
4.0 Web Site Location and Access
**********************************************************************
1.0 Introduction
**********************************************************************
This README file contains the installation procedure and usage
information for the beta Intel740(tm) graphics accelerator
software, and latest version of DirectX*. The software and hardware
requirements for this release are as follows:

## Software Drivers (SDR) Version: PV2.0
## Windows* NT Version: 3.51
## Video BIOS version: 212, 220, 230
## Intel740 graphics accelerator stepping A2

----------------
Version number
----------------
## Driver Release Version #
PV2.0 3.10.1715-980515-OPT,4.0.32

Video BIOS/Driver compatible combination
VIDEO BIOS PV 2.0
---------- ------
VB212 yes
VB220 yes
VB230 yes
This Intel740(tm) graphics accelerator driver is optimized to run
with the following PC configurations:
(1) Processor: Intel(R) Pentium(R)II processors
(2) Motherboard: Based on the Intel(r) 440LX AGPset, 440BX AGPset,
440GX AGPset or a later generation Intel AGPset, motherboard
must have an unpopulated AGP slot or the Intel740 chip must be
down on the motherboard
(3) Operating System: Windows* NT 3.51

Also included are release notes describing any problems or issues that
were known at the time of shipment.
**********************************************************************
2.0 Release Notes
**********************************************************************

------------------------
Production Version 2.0
------------------------
(1) Supports all 2D operations

(2) Performance will suffer on the Windows* NT 3.51 driver since
native support for the AGP bus is not present in the operating system.

Please see the Intel740(tm) Graphics Accelerator Specification Update
documents for the most up-to-date information concerning Intel740(tm)
graphics accelerator hardware and driver issues and errata.
**********************************************************************
3.0 Intel740(tm) Graphics Accelerator Driver Installation Procedure
**********************************************************************

----------------------------
General Installation Notes
----------------------------
** The operating system must be installed on the system prior to
installation of the Intel740(tm) graphics accelerator.
Company
Genius
Categories
Graphics cards
Model
Genius AGP I740
Description
Drivers
Operating Systems
Windows NT 3.51
Version Driver
1
Size Driver
102Kb
File Name
i740-nt35.exe
Info
1.0 Introduction
2.0 Release Notes
3.0 Intel740(tm) Graphic Accelerator Driver Installation Procedure
4.0 Web Site Location and Access
**********************************************************************
1.0 Introduction
**********************************************************************
This README file contains the installation procedure and usage
information for the beta Intel740(tm) graphics accelerator
software, and latest version of DirectX*. The software and hardware
requirements for this release are as follows:

## Software Drivers (SDR) Version: PV2.0
## Windows* NT Version: 3.51
## Video BIOS version: 212, 220, 230
## Intel740 graphics accelerator stepping A2

----------------
Version number
----------------
## Driver Release Version #
PV2.0 3.10.1715-980515-OPT,4.0.32

Video BIOS/Driver compatible combination
VIDEO BIOS PV 2.0
---------- ------
VB212 yes
VB220 yes
VB230 yes
This Intel740(tm) graphics accelerator driver is optimized to run
with the following PC configurations:
(1) Processor: Intel(R) Pentium(R)II processors
(2) Motherboard: Based on the Intel(r) 440LX AGPset, 440BX AGPset,
440GX AGPset or a later generation Intel AGPset, motherboard
must have an unpopulated AGP slot or the Intel740 chip must be
down on the motherboard
(3) Operating System: Windows* NT 3.51

Also included are release notes describing any problems or issues that
were known at the time of shipment.
**********************************************************************
2.0 Release Notes
**********************************************************************

------------------------
Production Version 2.0
------------------------
(1) Supports all 2D operations

(2) Performance will suffer on the Windows* NT 3.51 driver since
native support for the AGP bus is not present in the operating system.

Please see the Intel740(tm) Graphics Accelerator Specification Update
documents for the most up-to-date information concerning Intel740(tm)
graphics accelerator hardware and driver issues and errata.
**********************************************************************
3.0 Intel740(tm) Graphics Accelerator Driver Installation Procedure
**********************************************************************

----------------------------
General Installation Notes
----------------------------
** The operating system must be installed on the system prior to
installation of the Intel740(tm) graphics accelerator.
Company
Genius
Categories
Graphics cards
Model
Genius AGP I740
Description
Drivers
Operating Systems
Windows NT4
Version Driver
1
Size Driver
631Kb
File Name
i740-nt40.exe
Info
1.0 Introduction
2.0 Release Notes
3.0 Intel740(tm) Driver Installation Procedure
4.0 Web Site Location and Access
**********************************************************************
1.0 Introduction
**********************************************************************

This README file contains the installation procedure and usage
information for the Intel740(tm) graphics accelerator Windows* NT 4.0
production software. The software and hardware requirements for this
release are as follows:

** Software Drivers Release (SDR) Version: PV 2.0
** Windows* NT 4.0 Version: Service Pack 3.0
** Video BIOS version: 212, 220, 230
** Intel740(tm) graphics accelerator stepping A2

----------------
Version number
----------------
## Driver Version #
PV1.0 3.10.1513-980313-optPC1, 4.0.32
PV1.5 3.10.1629-980429-opt, 4.0.32
PV2.0 4.0.1381.1902-980702

------------------------------------------
Video BIOS/driver compatible combination
------------------------------------------
VIDEO BIOS PV1.0 PV1.5 PV2.0
---------- ----- ----- -----
VB212 YES YES YES
VB220 NO YES YES
VB230 NO NO YES

The Intel740(tm) graphics accelerator is optimized to run with the
following PC configurations:
(1) Processor: Intel(R) Pentium(R)II processors.
(2) Motherboard: Based on the Intel(R) 440LX, 440BX, 440GX AGPset
or a later generation Intel AGPset, motherboard must have an
unpopulated AGP slot or the Intel740 chip must be down on the
motherboard.
(3) Operating System: Windows* 95 OSR 2.1 or later (with USB
Supplement), Windows* 98, or Windows* NT 4.0 SP3 or later
Peripherals: A CD-ROM drive to install software and drivers
(4) To support fully optimized AGP configuration, 32MB of system
memory is recommended.

Also included are release notes describing any problems or issues that
were known at the time of shipment.

**********************************************************************
2.0 Release Notes
**********************************************************************
---------------------
Product Version 1.0
---------------------
(1) Supports all 2D and 3D (OpenGL*) operations.
(2) The PV1.0 drivers do not function in a multiprocessor
environment. This includes a system with two or more processors or a
uniprocessor system that runs with a multiprocessor, NT 4.0 kernel.
Intel plans on fixing this issue in a future driver release.

---------------------
Product Version 1.5
---------------------
(1) Same as PV1.0 with additional bug fixes (including
multiprocessor issue #2 above.)
HelpDrivers Since March 2000