Exsys EX-1302IS Download Drivers and Manual

Available 4 files for EX-1302IS
Company
Exsys
Categories
USB
Model
Exsys EX-1302IS
Description
USB 1.1 to 1S RS-232 port (FTDI Chip-Set)
Operating Systems
Manual
Size Manual
206Kb
File Name
ex-1302is.pdf
Info
HARDWARE INSTALLATION :
Attention! If you use Windows 98, ME, 2000 without service pack 4 or XP without
service pack. Please install the drivers for the card first.
If you use Windows 2000 including service pack 4, or Windows XP including
service pack 1 & 2. Or you already installed the drivers please proceed with the
following instructions for hardware installation.
If you are ready with the jumper settings for the card, please proceed with the following
installation instructions. Because the designs of computers are different, only general
installation instructions are given. Please refer your computer’s reference manual whenever
in doubt.
1. Turn off the power to your computer and any other connected peripherals.
2. Remove the mounting screws located at the rear and/or sides panels of your Computer
and gently slide the cover off.
3. If necessary please install now the external power supply to the card like shown at
JP1 & J6 above.
4. Locate an available PCI expansion slot and remove its covers from the rear panel of
your computer.
5. Align the card with the expansion slot, and then gently but firmly, insert the card.
Make sure the card is seated and oriented correctly.
6. Then connect the card with a screw to the rear panel of the computer.
7. Gently replace your computer’s cover and the mounting screws.
DRIVER INSTALLATION :
Windows 98 and ME
Please insert the driver CD into your CD-Rom drive (for example D:\ ) and open the
folder D:\USB 2.0\NEC\WIN9.x on the CD.
Now start the file “U2v2_1.exe“ by double click on your mouse and follow the setup
program to finish installation process. After that shut down windows and follow the
instructions for the Hardware installation. After installing the card simply start your
computer and the card will be installed automatically by your system.
CHECK INSTALLED DRIVER:
Open the >Device manager< . Now you should see at „USB Devices“ the following new
entry: Root Hub Device> .
If you see this or a similar information the card is installed correctly.
Windows 2000 and 2000 Server
Should you use Windows 2000 with service pack 4 you don’t need any drivers. The
drivers are already integrated in Windows and the card will be installed automatically.
Should you use Windows 2000 without service pack 4 please insert the driver CD into your
CD-Rom drive (for example D:\ ) and open the folder D:\USB 2.0\NEC\WIN9.x on the CD.
Now start the file “U2v2_1.exe“ by double click on your mouse and follow the setup
program to finish installation process. After that shut down windows and follow the
instructions for the Hardware installation. After installing the card simply start your
computer and the card will be installed automatically by your system.
CHECK INSTALLED DRIVER:
Open the >Device manager< . Now you should see at „USB Devices“ the following new
entry: Root Hub Device> .
If you see this or a similar information the card is installed correctly.
DRIVER INSTALLATION :
Windows XP Server 2003 and Vista
Should you use Vista or Windows XP with service pack 1 you don't need any drivers.
The drivers are already integrated in Windows and the card will be installed automatically.
Should you use Windows XP without any service pack please insert the driver CD into
your CD-Rom drive (for example D:\ ) and open the folder D:\USB 2.0\NEC\WIN9.x on the
CD.
Now start the file “U2v2_1.exe“ by double click on your mouse and follow the setup
program to finish installation process. After that shut down windows and follow the
instructions for the Hardware installation. After installing the card simply start your
computer and the card will be installed automatically by your system.
CHECK INSTALLED DRIVER:
Open the >Device manager< . Now you should see at „USB Devices“ the following new
entry: Root Hub Device> .
If you see this or a similar information the card is installed correctly.
MAC:
The drivers are already integrated in MAC OS and the card will be installed automatically.
In doubt please refer to the installation manual from your MAC OS version !
LINUX:
Because each individual distribution and kernel version of Linux is different, sadly we
cant provide a installation instruction here. Please refer to the installation manual for
USB ports from your Linux version !
Company
Exsys
Categories
USB
Model
Exsys EX-1302IS
Description
USB 1.1 to 1S RS-232 port (FTDI Chip-Set)
Operating Systems
Manual
Size Manual
206Kb
File Name
ex-1302is.pdf
Info
HARDWARE INSTALLATION :
Attention! If you use Windows 98, ME, 2000 without service pack 4 or XP without
service pack. Please install the drivers for the card first.
If you use Windows 2000 including service pack 4, or Windows XP including
service pack 1 & 2. Or you already installed the drivers please proceed with the
following instructions for hardware installation.
If you are ready with the jumper settings for the card, please proceed with the following
installation instructions. Because the designs of computers are different, only general
installation instructions are given. Please refer your computer’s reference manual whenever
in doubt.
1. Turn off the power to your computer and any other connected peripherals.
2. Remove the mounting screws located at the rear and/or sides panels of your Computer
and gently slide the cover off.
3. If necessary please install now the external power supply to the card like shown at
JP1 & J6 above.
4. Locate an available PCI expansion slot and remove its covers from the rear panel of
your computer.
5. Align the card with the expansion slot, and then gently but firmly, insert the card.
Make sure the card is seated and oriented correctly.
6. Then connect the card with a screw to the rear panel of the computer.
7. Gently replace your computer’s cover and the mounting screws.
DRIVER INSTALLATION :
Windows 98 and ME
Please insert the driver CD into your CD-Rom drive (for example D:\ ) and open the
folder D:\USB 2.0\NEC\WIN9.x on the CD.
Now start the file “U2v2_1.exe“ by double click on your mouse and follow the setup
program to finish installation process. After that shut down windows and follow the
instructions for the Hardware installation. After installing the card simply start your
computer and the card will be installed automatically by your system.
CHECK INSTALLED DRIVER:
Open the >Device manager< . Now you should see at „USB Devices“ the following new
entry: Root Hub Device> .
If you see this or a similar information the card is installed correctly.
Windows 2000 and 2000 Server
Should you use Windows 2000 with service pack 4 you don’t need any drivers. The
drivers are already integrated in Windows and the card will be installed automatically.
Should you use Windows 2000 without service pack 4 please insert the driver CD into your
CD-Rom drive (for example D:\ ) and open the folder D:\USB 2.0\NEC\WIN9.x on the CD.
Now start the file “U2v2_1.exe“ by double click on your mouse and follow the setup
program to finish installation process. After that shut down windows and follow the
instructions for the Hardware installation. After installing the card simply start your
computer and the card will be installed automatically by your system.
CHECK INSTALLED DRIVER:
Open the >Device manager< . Now you should see at „USB Devices“ the following new
entry: Root Hub Device> .
If you see this or a similar information the card is installed correctly.
DRIVER INSTALLATION :
Windows XP Server 2003 and Vista
Should you use Vista or Windows XP with service pack 1 you don't need any drivers.
The drivers are already integrated in Windows and the card will be installed automatically.
Should you use Windows XP without any service pack please insert the driver CD into
your CD-Rom drive (for example D:\ ) and open the folder D:\USB 2.0\NEC\WIN9.x on the
CD.
Now start the file “U2v2_1.exe“ by double click on your mouse and follow the setup
program to finish installation process. After that shut down windows and follow the
instructions for the Hardware installation. After installing the card simply start your
computer and the card will be installed automatically by your system.
CHECK INSTALLED DRIVER:
Open the >Device manager< . Now you should see at „USB Devices“ the following new
entry: Root Hub Device> .
If you see this or a similar information the card is installed correctly.
MAC:
The drivers are already integrated in MAC OS and the card will be installed automatically.
In doubt please refer to the installation manual from your MAC OS version !
LINUX:
Because each individual distribution and kernel version of Linux is different, sadly we
cant provide a installation instruction here. Please refer to the installation manual for
USB ports from your Linux version !
Company
Exsys
Categories
USB
Model
Exsys EX-1302IS
Description
USB 1.1 to 1S RS-232 port (FTDI Chip-Set)
Operating Systems
Windows 98-98Se-Me-2000-XP-2003-Vista-Linux-MacOs
Size Driver
3.4Mb
File Name
ex-1302is.zip
Company
Exsys
Categories
USB
Model
Exsys EX-1302IS
Description
USB 1.1 to 1S RS-232 port (FTDI Chip-Set)
Operating Systems
Windows 98-98Se-Me-2000-XP-2003-Vista-Linux-MacOs
Size Driver
3.4Mb
File Name
ex-1302is.zip
HelpDrivers Since March 2000