Mediaforte Legancy 128 Download Drivers

Available 2 files for Legancy 128
Company
Mediaforte
Categories
Sound Card & Multimedia & MP3
Model
Mediaforte Legancy 128
Description
Drivers
Operating Systems
Windows 95-98
Size Driver
4.4Mb
File Name
fmd2_95.zip
Info
Sound Blaster 16 Readme File
============================

This file contains additional information to supplement the manual.
Please read all the sections before you proceed with the installation.

This file contains the following sections:

1. Installation
2. Uninstallation
3. DOS Environment settings
4. DOS Audio Driver Support under Windows 95 DOS Box
5. Using CREATIVE IDE CD-ROM drive in MS-DOS Mode
6. BLASTER settings under MS-DOS Mode
7. Full-Duplex Constraints
8. Online Documentation
9. Acknowledgments
1. INSTALLATION

The full installation option requires about 6 MBytes of hard disk
space for the program files and an additional 2 MBytes for working space.
You might need more if your drive is in compressed form.
2. UNINSTALLATION

Before uninstalling the software package, ensure that all Sound
Blaster 16 applications are closed. Any Sound Blaster 16 application
that is running while uninstallation is in progress will not be deleted
Also, files that are added to the Sound Blaster 16 directory after
the initial software installation will not be deleted by the
uninstallation process. You will have to manually delete these files
after the uninstallation process is completed.

Some of the files in the Windows directory can be shared by other
applications. The uninstallation will prompt you when it tries to
delete these files. You should choose not to delete the files unless
you are very sure that the files are no longer used by Windows.
3. DOS ENVIRONMENT SETTINGS

Some of the existing DOS programs require the presence of MIDI and
SOUND environments in order for them to work. The Setup program will
add the SET MIDI and SET SOUND environment lines at the beginning of
the AUTOEXEC.BAT file.
4. DOS AUDIO DRIVER SUPPORT UNDER WINDOWS 95 DOS BOX

Some of the DOS applications are developed with Creative's Sound
Blaster Developer Kit. These applications require the low-level
DOS audio device drivers to be loaded. To load the DOS audio
drivers, you need to add the following lines to the CONFIG.SYS file:

DEVICE=\DRV\CTSB16.SYS /UNIT=0 /BLASTER=A:220 I:5 D:1 H:5 /WIN95
DEVICE=\DRV\CTMMSYS.SYS

Remarks:

a. is the sound directory where the audio software is located.

b. The /BLASTER parameter specifies the Sound Blaster base I/O port
address (A), interrupt request line (I), low 8-bit DMA channel (D)
and high 16-bit DMA channel (H).

c. The settings in the /BLASTER parameter must tally with the actual
settings allocated by Windows 95. To find out the actual settings,
go into Windows 95 DOS box, and type SET and press at the
DOS prompt. You will see one of the lines displayed is:
Company
Mediaforte
Categories
Sound Card & Multimedia & MP3
Model
Mediaforte Legancy 128
Description
Drivers
Operating Systems
Windows NT4
Version Driver
03.01
Size Driver
90Kb
File Name
fmd2nt4.zip
HelpDrivers Since March 2000