Available 6 files for Labway XWave 4000

 

Select Files

Company

Labway

Categories

Sound Card & Multimedia & MP3

Model

Labway XWave 4000

Description

Drivers

Operating System

MS-Dos

Version

1.0

Size Driver

212KB

File Name

als_4000_dos.zip

Observations

DOS and Windows 3.1 Installation for ALS4000:
====================================================

[SETUP.EXE for Windows 3.1]

The SETUP.EXE is a Windows 3.1 setup program that installs DOS and Windows
3.1 drivers and utilities.

The user can run SETUP.EXE by selecting File|Run... and typing "A:SETUP" on
the command line under Windows 3.1 Program Manager, or by typing "A:SETUP" at
DOS prompt if Windows directory is in the PATH. The SETUP.EXE copies all the
DOS drivers and utilities to the directory that user specifies during the
setup program. All the Windows 3.1 drivers and VxDs are copied to the
Windows system directory. When the user installs the Avance Sound System
for the first time the APCONFIG.EXE is started to configure the board setting
after the Setup program is finished.

[DOSINST.EXE for DOS Only installation]

The DOSINST.EXE is a DOS installation program that copies all the DOS drivers
and utilities to the directory that user specifies. When the user installs
the Avance Sound System for the first time the APCONFIG.EXE is started to
configure the board setting after the Setup program is finished. DOSINST.EXE
can be installed by typing A:DOSINST.EXE at the DOS prompt.
Troubleshooting:
================

This appendix provides some tips and information for some of the
problems you might encounter with your ALS4000 sound card either during
installation or normal use.

[Problems in DOS]

Problem: No sound in a DOS application
Cause: There could be conflicts in the SB16 settings.
Solution: Rerun the AVCONFIG.EXE and try another Port,
DMA, or IRQ.

[Problems in Windows 3.1]

Problem: There is no "Sound..." or "MIDI Sequencer..." item
under the menu "Device" in the Media Player.
Cause: Mixer driver is not loaded.
Solution: Open the SYSTEM.INI file with any file editor. You
should see the following:
[drivers]
Wave=avpci31.drv
Aux=avpci31.drv
Mixer=avpci31.drv
Midi=avpci31.drv

[386Enh]
device=avsndsys.386

[boot]
drivers=mmsystem.dll msmixmgr.dll
Problem: Third party mixer application with Sound Blaster compatibility
will not run with Avance Sound System.
Cause: Avance Sound System is Microsoft Sound System compatible. Avance
Logic, Inc. does not support previous Sound Blaster Mixer Interface.
Solution: Use ALSRACK.EXE application that is shipped with this disk.
Problem: CD audio will not play after the ALS drivers are installed.
Cause: The user did not install the [MCI]CD-AUDIO driver.

Company

Labway

Categories

Sound Card & Multimedia & MP3

Model

Labway XWave 4000

Description

Drivers

Operating System

Windows 2000

Version

1.0

Size Driver

38KB

File Name

als_4000_w2kdrv.zip

Observations

[Version]
CatalogFile=als4000.cat
Signature="$CHICAGO$"
Class=MEDIA
ClassGUID={4d36e96c-e325-11ce-bfc1-08002be10318}
LayoutFile=layout.inf, layout1.inf, layout2.inf
provider=%ALI%
DriverVer= 11/24/1999,5.00.2128.1

[SourceDisksFiles]
als4000.sys=4000,,
alsgame.sys=4000,,

[SourceDisksNames]
4000=%DiskName%,,,

[Manufacturer]
%ALIMfgName%=AvanceLogicInc

;;---------------------------------------------------------------;
;;
;; D E V I C E C A L L O U T S E C T I O N
;;

[AvanceLogicInc]
%ALS4000.DeviceDesc% =WDM_ALS4000, MF\ALS4000_AUDIO
%ALS_GAME.DeviceDesc%=ALS_GAME, MF\ALS4000_GAMEPORT

;;---------------------------------------------------------------;
;;
;; D I R E C T O R Y S E C T I O N
;;

[DestinationDirs]
DefaultDestDir = 11
WDM_ALS4000.CopyList = 10,system32\drivers ; %SystemRoot%\system32\drivers
GAMEENUM.CopyList = 10,system32\drivers ;

[PreCopySection]
HKR,,NoSetupUI,,1

;;---------------------------------------------------------------;
;;
;; D R I V E R C A L L O U T S E C T I O N
;;

[WDM_ALS4000]
;;AlsoInstall=KS.Registration(ks.inf), WDMAUDIO.Registration(wdmaudio.inf)
Include=ks.inf, wdmaudio.inf
Needs=KS.Registration, WDMAUDIO.Registration
CopyFiles=WDM_ALS4000.CopyList
AddReg=WDM_ALS4000.AddReg

[WDM_ALS4000.Interfaces]
AddInterface=%KSCATEGORY_AUDIO%,%KSNAME_Wave%,WDM.Interface.Wave
AddInterface=%KSCATEGORY_RENDER%,%KSNAME_Wave%,WDM.Interface.Wave
AddInterface=%KSCATEGORY_CAPTURE%,%KSNAME_Wave%,WDM.Interface.Wave
AddInterface=%KSCATEGORY_AUDIO%,%KSNAME_Topology%,WDM.Interface.Topology
AddInterface=%KSCATEGORY_TOPOLOGY%,%KSNAME_Topology%,WDM.Interface.Topology
AddInterface=%KSCATEGORY_AUDIO%,%KSNAME_FMSynth%,WDM.Interface.FMSynth
AddInterface=%KSCATEGORY_RENDER%,%KSNAME_FMSynth%,WDM.Interface.FMSynth
AddInterface=%KSCATEGORY_AUDIO%,%KSNAME_UART%,WDM.Interface.UART
AddInterface=%KSCATEGORY_RENDER%,%KSNAME_UART%,WDM.Interface.UART
AddInterface=%KSCATEGORY_CAPTURE%,%KSNAME_UART%,WDM.Interface.UART

[WDM.Interface.Wave]
AddReg=WDM.Interface.Wave.AddReg

[WDM.Interface.Wave.AddReg]
HKR,,CLSID,,%Proxy.CLSID%
HKR,,FriendlyName,,%WDM.Wave.szPname%

[WDM.Interface.Topology]

Company

Labway

Categories

Sound Card & Multimedia & MP3

Model

Labway XWave 4000

Description

Drivers

Operating System

Windows 3.1

Version

1.0

Size Driver

769KB

File Name

als_4000_win31drv.zip

Observations

DOS and Windows 3.1 Installation for ALS4000:
====================================================

[SETUP.EXE for Windows 3.1]

The SETUP.EXE is a Windows 3.1 setup program that installs DOS and Windows
3.1 drivers and utilities.

The user can run SETUP.EXE by selecting File|Run... and typing "A:SETUP" on
the command line under Windows 3.1 Program Manager, or by typing "A:SETUP" at
DOS prompt if Windows directory is in the PATH. The SETUP.EXE copies all the
DOS drivers and utilities to the directory that user specifies during the
setup program. All the Windows 3.1 drivers and VxDs are copied to the
Windows system directory. When the user installs the Avance Sound System
for the first time the APCONFIG.EXE is started to configure the board setting
after the Setup program is finished.

[DOSINST.EXE for DOS Only installation]

The DOSINST.EXE is a DOS installation program that copies all the DOS drivers
and utilities to the directory that user specifies. When the user installs
the Avance Sound System for the first time the APCONFIG.EXE is started to
configure the board setting after the Setup program is finished. DOSINST.EXE
can be installed by typing A:DOSINST.EXE at the DOS prompt.
Troubleshooting:
================

This appendix provides some tips and information for some of the
problems you might encounter with your ALS4000 sound card either during
installation or normal use.

[Problems in DOS]

Problem: No sound in a DOS application
Cause: There could be conflicts in the SB16 settings.
Solution: Rerun the AVCONFIG.EXE and try another Port,
DMA, or IRQ.

[Problems in Windows 3.1]

Problem: There is no "Sound..." or "MIDI Sequencer..." item
under the menu "Device" in the Media Player.
Cause: Mixer driver is not loaded.
Solution: Open the SYSTEM.INI file with any file editor. You
should see the following:
[drivers]
Wave=avpci31.drv
Aux=avpci31.drv
Mixer=avpci31.drv
Midi=avpci31.drv

[386Enh]
device=avsndsys.386

[boot]
drivers=mmsystem.dll msmixmgr.dll
Problem: Third party mixer application with Sound Blaster compatibility
will not run with Avance Sound System.
Cause: Avance Sound System is Microsoft Sound System compatible. Avance
Logic, Inc. does not support previous Sound Blaster Mixer Interface.
Solution: Use ALSRACK.EXE application that is shipped with this disk.
Problem: CD audio will not play after the ALS drivers are installed.
Cause: The user did not install the [MCI]CD-AUDIO driver.

Company

Labway

Categories

Sound Card & Multimedia & MP3

Model

Labway XWave 4000

Description

Drivers

Operating System

Windows 95-98

Version

1.0

Size Driver

2.7MB

File Name

als_4000_win98wdm.zip

Observations

Windows98(WDM) Driver & Application Installation/Removal Procedure For ALS4000:
=================================================================================

First Time Driver/Application Installation:

Step 1. After installing the ALS4000 sound card into the PCI slot of your
computer, turn on the system power. Windows 98 will prompt you with
a "New Hardware Found" dialog box. To install the Windows 98 driver,
please select "Driver from disk provided by hardware manufacturer"
option and click on [OK].

Step 2. Insert the "ALS4000 Windows98 Driver and Utilities" CD-ROM/disk into the
appropriate drive and select that drive from the prompted dialog box and
click on [OK]. Windows 98 will copy all the needed files and set up all
the logic devices on the board automatically.

Step 3. Install the application(ALSRACK Player) by running the SETUP.EXE file
(included in the " Windows98 Drivers and Utilities" CD-ROM/disk) from
the Windows 98 START MENU|RUN. In selecting a setup type, please choose
"Install Application Only..." and click on [Next]. By doing so, setup
will install the bundled application into you computer system.

Note: See below for full description of ALSRACK functions.

Driver/Application Removal & Installation:

Step 1. To remove an existing driver/application and install with the latest
driver/application, please run SETUP.EXE file(inlcuded in the " Windows98
Drivers and Utilities" CD-ROM/disk) from the Windows 98 START MENU|RUN.

Step 2. In selecting a setup type, please choose "Remove and Install Software.."
and click on [Next]. When asked with "Do you want to install the bundled
application?" Select "Yes, I do." to install ALSRACK Player or "No, I
don't." if not. Click on [Next] and the program will install both the driver
and application automatically.

Note: If you have not installed the bundled application(ALSRACK Player) in step
#2 and wish to install later, you can run SETUP.EXE again and select "Install
Application Only.."
Driver/Application Removal ONLY:

Step 1. If you want to remove an existing driver/application ONLY, you may do so by
running SETUP.EXE file (inlcuded in the " Windows98 Drivers and Utilities"
CD-ROM/disk) from the Windows 98 START MENU|RUN.

Step 2. In selecting a setup type, please choose "Remove Software.." and click on
[Next]. The program will remove all existing and associated driver files
automatically.

Troubleshooting:
================================================================================
If no sound or device does not function properly, please check
CONTROL PANEL|SYSTEM|DEVICE MANAGER. The list of audio related devices appear
under the category of "SOUND, VIDEO & Game Controller.." should include the followings:

Avance PCI Sound Device (WDM)
Avance Game Port

Note: If any of the above devices has an yellow exclamation mark next to it or appear
to be missing, please run SETUP.EXE again and choose "Removal and Install Software.."
to insure the above devices are properly installed.

Company

Labway

Categories

Sound Card & Multimedia & MP3

Model

Labway XWave 4000

Description

Drivers

Operating System

Windows Me

Version

1.0

Size Driver

2.7MB

File Name

als_4000_winme.zip

Observations

[Version]
CatalogFile=als4000.cat
Signature="$CHICAGO$"
Class=MEDIA
ClassGUID={4d36e96c-e325-11ce-bfc1-08002be10318}
LayoutFile=layout.inf, layout1.inf, layout2.inf
provider=%ALI%
DriverVer= 12/27/1999,5.00.2400.1

[SourceDisksFiles]
als4000.sys=4000,,
alsgame.sys=4000,,

[SourceDisksNames]
4000=%DiskName%,,,

[Manufacturer]
%ALIMfgName%=AvanceLogicInc

;;---------------------------------------------------------------;
;;
;; D E V I C E C A L L O U T S E C T I O N
;;

[AvanceLogicInc]
%ALS4000.DeviceDesc% =WDM_ALS4000, MF\ALS4000_AUDIO
%ALS_GAME.DeviceDesc%=ALS_GAME, MF\ALS4000_GAMEPORT

;;---------------------------------------------------------------;
;;
;; D I R E C T O R Y S E C T I O N
;;

[DestinationDirs]
DefaultDestDir = 11
WDM_ALS4000.CopyList = 10,system32\drivers ; %SystemRoot%\system32\drivers
GAMEENUM.CopyList = 10,system32\drivers ;

[PreCopySection]
HKR,,NoSetupUI,,1

;;---------------------------------------------------------------;
;;
;; D R I V E R C A L L O U T S E C T I O N
;;

[WDM_ALS4000]
;;AlsoInstall=KS.Registration(ks.inf), WDMAUDIO.Registration(wdmaudio.inf)
Include=ks.inf, wdmaudio.inf
Needs=KS.Registration, WDMAUDIO.Registration
CopyFiles=WDM_ALS4000.CopyList
AddReg=WDM_ALS4000.AddReg

[WDM_ALS4000.Interfaces]
AddInterface=%KSCATEGORY_AUDIO%,%KSNAME_Wave%,WDM.Interface.Wave
AddInterface=%KSCATEGORY_RENDER%,%KSNAME_Wave%,WDM.Interface.Wave
AddInterface=%KSCATEGORY_CAPTURE%,%KSNAME_Wave%,WDM.Interface.Wave
AddInterface=%KSCATEGORY_AUDIO%,%KSNAME_Topology%,WDM.Interface.Topology
AddInterface=%KSCATEGORY_TOPOLOGY%,%KSNAME_Topology%,WDM.Interface.Topology
AddInterface=%KSCATEGORY_AUDIO%,%KSNAME_FMSynth%,WDM.Interface.FMSynth
AddInterface=%KSCATEGORY_RENDER%,%KSNAME_FMSynth%,WDM.Interface.FMSynth
AddInterface=%KSCATEGORY_AUDIO%,%KSNAME_UART%,WDM.Interface.UART
AddInterface=%KSCATEGORY_RENDER%,%KSNAME_UART%,WDM.Interface.UART
AddInterface=%KSCATEGORY_CAPTURE%,%KSNAME_UART%,WDM.Interface.UART

[WDM.Interface.Wave]
AddReg=WDM.Interface.Wave.AddReg

[WDM.Interface.Wave.AddReg]
HKR,,CLSID,,%Proxy.CLSID%
HKR,,FriendlyName,,%WDM.Wave.szPname%

Company

Labway

Categories

Sound Card & Multimedia & MP3

Model

Labway XWave 4000

Description

Drivers

Operating System

Windows NT4

Version

1.0

Size Driver

57KB

File Name

als_4000_nt40.zip

Observations

[Source Media Descriptions]
1 = "Avance Logic, Inc. Sound Driver" , TAGFILE = disk1

[Installable.Drivers]
alsound = 1:als4000.dll, "wave,MIDI,aux,mixer", "Avance Logic, Inc. ALS4000" ,,,

[alsound]
1:als4000.sys
1:midimap.cfg

Access to Official Website Labway

Sorry, Labway Official Website has disappeared!

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.