Genius SoundMaker Live 5.1 Download Drivers

[1] Installation Procedure for SM Live NT2.00d
==========================================

[1.1] Install Using Setup Program
---------------------------
For Typical Driver Directory in CD, D:\Winnt40 (Assuming D: is the CD-ROM drive),
1) Turn off Machine
2) Insert SM Live Card
3) Turn on Machine and reboot computer
4) If you have installed any earlier version of SM Live driver, remove it before your
installation (Following directions in [1.4]).
5) Run Windows Explorer
6) Double click the directory containing the device driver (D:\Winnt40)
in this example.
7) Run Setup.exe by double click the icon beside Setup.exe.
8) Reboot the computer after installation.

[1.2] Install Using Control Panel
---------------------------
For typical device driver directory in CD, D:\Winnt40 (Assuming D: is your CD-ROM drive),
1) Turn off Machine
2) Insert SM Live PCI Card
3) Turn on Machine and reboot system
4) Open Control Panel following Start\Settings\Control Panel.
5) Run Multimedia applet by double click the Multimedia icon.
6) Install Wave, Mixer, Fm-Syn driver:
a. Select the "Devices" tab
b. Click "Add" Button which locates at the bottom of the tab
c. An "Add" dialogue box is displayed, select the "Unlisted or Updated driver" item,
then click the "Ok" button.
d. An "Install Driver" dialogue box is displayed, enter D:\Winnt40 in the edit box,
then click the "Ok" button. Or, search the directory in which driver locates using "Browse", then
click the "Ok" button
e. An "Add unlisted or update driver" dialog box is displayed, select "SM Live Wave, Mixer, and FM-Syn" item,
then click the "Ok" button to install audio driver. After the driver is installed, system will prompt
to restart the computer. Click "Restart now" button.
f. After the driver is installed, an "System setting change" dialog box will pop up with two choose buttons
of "Don't Restart Now" and "Restart Now", to activate the change of the new installed driver, click the
"Restart Now" button to restart the computer.

[1.3] Install Joystick
Windows NT has provided joystick driver, path of the driver is \drvlib\multimed\joystick\x86 in the Windows NT
CD, following steps below to install it:
1) Open Control Panel following Start\Settings\Control Panel.
2) Run Multimedia applet by double click the Multimedia icon.
3) In Multimedia applet:
a. Select the "Devices" tab
b. Click "Add" Button which locates at the bottom of the tab
c. An "Add" dialogue box is displayed, select the "Unlisted or Updated driver" item,
then click the "Ok" button.
d. An "Install Driver" dialogue box is displayed, enter d:\drvlib\multimed\joystick\x86 in the edit
box (assume drive D: is where your Windows NT CD locates), then click the "Ok" button. Or, search
above directory in which driver locates using "Browse", then click the "Ok" button.

[1.4] Uninstall the SM Live Driver
--------------------------
1) Open Control Panel following Start\Settings\Control Panel.
2) Run Multimedia applet by double click the Multimedia icon.
3) In Multimedia applet:
a. Select the "Devices" tab
b. Double click the "MIDI Devices and Instruments" under "Multimedia Drivers"
c. Select "Audio for SM Live Wave, Mixer, and MIDI" entry
d. Click "Remove" button
e. After the driver is removed, an "System setting change" dialog box will pop up with two buttons
of choices "Don't Restart Now" and "Restart Now". To activate the change of the driver remove,
click the "Restart Now" button to restart the computer.

[1.5] Upgrade with new Driver
-----------------------
To upgrade driver, the first step is uninstall the existing driver (following
directions in [1.4]), then install the updated driver (following directions
in [1.1], or [1.2]).