Diamond DT0297F Download Drivers

Available 1 files for DT0297F
Company
Diamond
Categories
Sound Card & Multimedia & MP3
Model
Diamond DT0297F
Description
Drivers
Operating Systems
MS-Dos-Windows 3.1-95-98-98Se-NT4
Size Driver
624Kb
File Name
diamond0297f.zip
Info
Diamond Technologies Sound System Software
Installation and Setup
DOS and Windows 3.1 Installation:
=================================
[SETUP.EXE for Windows 3.1]
The SETUP.EXE is a Windows 3.1 setup program that installs DOS and Windows
3.1 drivers and utilities.
The user can run SETUP.EXE by selecting File|Run... and typing "A:SETUP" on
the command line under Windows 3.1 Program Manager, or by typing "A:SETUP" at
DOS prompt if Windows directory is in the PATH. The SETUP.EXE copies all the
DOS drivers and utilities to the directory that user specifies during the
setup program. All the Windows 3.1 drivers and VxDs are copied to the
Windows system directory. When the user installs the Diamond Sound System
for the first time the D3CONFIG.EXE is started to configure the board setting
after the Setup program is finished.
[DOSINST.EXE for DOS Only installation]
The DOSINST.EXE is a DOS installation program that copies all the DOS drivers
and utilities to the directory that user specifies. When the user installs
the Diamond Sound System for the first time the D3CONFIG.EXE is started to
configure the board setting after the Setup program is finished. DOSINST.EXE
can be installed by typing A:DOSINST.EXE at the DOS prompt.

Windows 95 installation:
========================
1. After user installs the Diamond sound card into the ISA slot in the computer
and powers on the system, Windows 95 will prompt user with a "New Hardware
Found" dialog box since the Diamond sound card is ISA plug and play. To
install the Windows 95 drivers, select "Driver from disk provided by
hardware manufacturer" and click on OK.
2. Insert the "Diamond Sound DOS/Win3.1/Win 95 Drivers and Utilities" diskette
into the appropriate drive and select that drive from the prompted dialog
box and click on OK. Windows 95 will copy all the needed files and set up
all the logic devices on the board automatically.

Windows NT4.0 Driver installation:
==================================
1. Start Windows NT and Insert the "Diamond DOS/Win3.1/Win 95/Win NT Drivers
and Utilities" Disk into A (or B) drive.
2. Click Start-Run, Type in A:\nt\setupnt then click "OK". Back to NT and do
the following:
(1) Click "Add..." within CONTROL PANEL/Multimedia/Devices page.
(2) Choose Unlisted or Updated DRIVER and press "OK".
(3) Type in C:\dt297\ in Install Driver dialog box then click "Ok".
(4) Click "Ok" in Add Unlisted or Updated Driver dialog box.
(5) Continue to finish Installation then Restart Windows NT.
** While installing, "Driver Exists" warning message will appear if
an old version was detected and make sure to select New driver
(or re-install), otherwise Midi will not function properly.
** You may asked to remove the old driver befor update to new one.
Do the following to remove the old driver:
a. Double click on 'Audio Devices' in Multimedia/Devices page.
b. Highlight the Audio device listed then click Remove button.
c. Repead steps (1) to (5) above.
HelpDrivers Since March 2000