BTC 1820T Download Drivers

Available 3 files for 1820T
Company
BTC
Categories
Sound Card & Multimedia & MP3
Model
BTC 1820T
Description
Drivers
Operating Systems
MS-DOS
Size Driver
343Kb
File Name
1820td31.zip
Info
1. If your MITSUMI CD-ROM drive doesn't work with the DMA driver,
select 'Non DMA' during installation.

2. Use the CD-ROM driver that comes with your CD-ROM driver to
install if your CD-ROM drive doesn't work with the CD-ROM
driver that comes with MOZART sound card.
The following are CD-ROM installation procedures assuming you
choose to use the CD-ROM interface on the sound card.

Step 1 : Install CD-ROM drive according to manufacturer's
procedures.
a. Connect power cable to CD-ROM drive.
b. Connect AT-Bus cable and audio cable between Sound
card and CD-ROM drive.

Step 2 : Install CD-ROM drivers which come with the drive.
a. Install drivers that come with your CD-ROM drive by
running the "install" or "setup" in the program disk. Make
sure the device drivers are added to your "CONFIG.SYS"
and "AUTOEXEC.BAT" files. Please refer User's Guide of
Installation & Drivers for more details.
Note:
The name for CD-ROM drive varies with respect to makers.
The path name may vary according to its installation
Make sure you have RESET your computer after two files
were altered.

Step 3 : Choose the correct CD-ROM type in the installation program
which comes with the sound card.
a. Run Sound Card Installation program.
b. Choose the correct CD-ROM drive maker.

Step 4 : Windows users will have to add CD AUDIO driver in to Windows
drivers list. (CD AUDIO driver is in the Windows SETUP diskettes.)
a. Run Windows and open "Control Panel".
b. Double click on "Drivers" and select "Add".
c. Choose "[MCI] CD Audio" and click on OK button.
d. Put in the correct disk when Windows instructs you to do so.
e. Screen will show "One CD-ROM drive was detected.
Installation is complete."
Company
BTC
Categories
Sound Card & Multimedia & MP3
Model
BTC 1820T
Description
Drivers
Operating Systems
Windows 3.1
Size Driver
343Kb
File Name
1820td31.zip
Info
1. If your MITSUMI CD-ROM drive doesn't work with the DMA driver,
select 'Non DMA' during installation.

2. Use the CD-ROM driver that comes with your CD-ROM driver to
install if your CD-ROM drive doesn't work with the CD-ROM
driver that comes with MOZART sound card.
The following are CD-ROM installation procedures assuming you
choose to use the CD-ROM interface on the sound card.

Step 1 : Install CD-ROM drive according to manufacturer's
procedures.
a. Connect power cable to CD-ROM drive.
b. Connect AT-Bus cable and audio cable between Sound
card and CD-ROM drive.

Step 2 : Install CD-ROM drivers which come with the drive.
a. Install drivers that come with your CD-ROM drive by
running the "install" or "setup" in the program disk. Make
sure the device drivers are added to your "CONFIG.SYS"
and "AUTOEXEC.BAT" files. Please refer User's Guide of
Installation & Drivers for more details.
Note:
The name for CD-ROM drive varies with respect to makers.
The path name may vary according to its installation
Make sure you have RESET your computer after two files
were altered.

Step 3 : Choose the correct CD-ROM type in the installation program
which comes with the sound card.
a. Run Sound Card Installation program.
b. Choose the correct CD-ROM drive maker.

Step 4 : Windows users will have to add CD AUDIO driver in to Windows
drivers list. (CD AUDIO driver is in the Windows SETUP diskettes.)
a. Run Windows and open "Control Panel".
b. Double click on "Drivers" and select "Add".
c. Choose "[MCI] CD Audio" and click on OK button.
d. Put in the correct disk when Windows instructs you to do so.
e. Screen will show "One CD-ROM drive was detected.
Installation is complete."
Company
BTC
Categories
Sound Card & Multimedia & MP3
Model
BTC 1820T
Description
Drivers
Operating Systems
Windows 95
Size Driver
720Kb
File Name
1820w95.zip
Info
Table of Content

1. Welcome
2. Install and configure Mozart Windows 95 driver
2.1 Remove existing Mozart driver.
2.2 How to install Mozart Windows 95 driver.
2.3 Install Joystick driver.
3. CD-ROM connected to the Mozart interface.
3.1 Procedure for installing CD-ROM driver.
3.2 Supported CD-ROM models.
HelpDrivers Since March 2000