Colortrac SmartLF Gx+ Download Drivers, Utilities and Firmware

The following is the important information of Colortrac SmartLF Gx+ installation driver.

• Click on Download Now and a File Download box will appear.
  Select Save This Program to Disk and a Save As box will appear.
  Select a directory to save the driver in and click Save.
  Locate the driver file using Windows Explorer when the download has completed.
  
  
• Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the SmartLF Gx+ model that was downloaded (for example c:\SmartLF Gx+). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the driver file.
  
  
• Before starting the installation of drivers, connect your scanner Colortrac SmartLF Gx+ to your computer, and that the scanner is powered On. See your printer manual for details.
  
  
• Remove any previus Colortrac SmartLF Gx+ driver from Windows control panel and reboot the system.
  
  
• Windows now detects Colortrac SmartLF Gx+ and searchs for a driver: you must stop any request and hit on "Cancel button".
  
  
• Double click on Setup.exe (or similar file xxx.exe) located in c:\SmartLF Gx+ folder
  
  
• Follow the on screen istructions
  
  
• If during installation in Windows, you will be prompted with a message warning that the driver software for SmartLF Gx+ has not passed Windows Logo testing. Select Continue Anyway and proceed with the installation. The driver is completely tested and verified by Colortrac, and safe to use.
  
  
• Reboot the system
  
  
• Congratulations, the drivers for scanner Colortrac SmartLF Gx+ is installed.
  
  
• Search and consult the Readme file for additional installation drivers instructions for your scanner SmartLF Gx+.