Minolta DeskLaser 2000 > Download Drivers


3 files availables for DeskLaser 2000
3 files availables for DeskLaser 2000

Company
Minolta
Categories
Printers
Model
Minolta DeskLaser 2000
Description
Drivers GDI
Operating Systems
Windows 95-98
Language Driver
Multilingual
Size Driver
2.1Mb
File Name
dl2000-w9x.zip
Company
Minolta
Categories
Printers
Model
Minolta DeskLaser 2000
Description
Drivers GDI
Operating Systems
Windows NT3.51
Language Driver
Multilingual
Version Driver
3.25
Size Driver
927Kb
File Name
dl2000-nt351.zip
Company
Minolta
Categories
Printers
Model
Minolta DeskLaser 2000
Description
Drivers GDI
Operating Systems
Windows NT4
Language Driver
Multilingual
Version Driver
3.50
Size Driver
1.5Mb
File Name
dl2000-nt4.zip

Before installing this printer driver Minolta DeskLaser 2000, read the following precautions:



  • Before starting the installation of drivers, connect your printer Minolta DeskLaser 2000 to your computer, and that the printer is powered On. See your printer manual for details.

    Important! Do not turn printer off, remove cables, or unplug the printer, or interrupt it in any way during the driver installation process.

  • Close virus protection programs or other software programs that are running on your computer.

  • You must have full-control access to DeskLaser 2000 printer settings to carry out an installation. Before starting the installation of drivers, log in as a member of the Administrators group.

  • If you have an earlier version of the Minolta printer driver installed on your computer, you must remove it with the uninstaller before installing the new driver for Minolta DeskLaser 2000.

  • Click on Download Now and a File Download box will appear.
    Select Save This Program to Disk and a Save As box will appear.
    Select a directory to save the driver in and click Save.
    Locate the driver file using Windows Explorer when the download has completed.

  • Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the printer model that was downloaded (i.e., c:\DeskLaser 2000). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the driver file.

  • Open the Printers Window (Click Start-Settings-Printers).

  • Update the printer driver if it was previously installed

  • Right click on the printer and select Properties from the pop menu.

  • On the General tab, select New Driver.

  • Click on the Warning Box that pops up.

  • A printer listing box will appear. Select Have Disk.

  • Another box Install from Disk appears.

  • Click the Browse to locate the expanded files directory (i.e., c:\DeskLaser 2000).

  • Click on the file ending with .inf .

  • Click Open and then Okay and let driver files install.

  • Add the printer DeskLaser 2000 if it hasn't been installed yet.

  • Click Add New Printer

  • Follow the instructions of the Add Printer Driver Wizard.

  • Search and consult the Readme file for additional installation drivers instructions for your printer Minolta DeskLaser 2000.



Depending on the environment that you are using, a Windows printer driver provided by Microsoft may be installed automatically on your computer. However, it is recommended that you use this official printer driver provided by Minolta for DeskLaser 2000 printer.
HelpDrivers Since March 2000