Lexmark 4076 Execjet IIc Download Drivers

Available 2 files for 4076 Execjet IIc
Company
Lexmark
Categories
Printers
Model
Lexmark 4076 Execjet IIc
Description
4076 Execjet IIc
Operating Systems
MS-Dos
Language Driver
English
Version Driver
1
Size Driver
18Kb
File Name
76dexx3e.exe
Company
Lexmark
Categories
Printers
Model
Lexmark 4076 Execjet IIc
Description
4076 Execjet IIc
Operating Systems
Windows 3.x-95
Language Driver
English
Version Driver
1.1.6
Size Driver
348Kb
File Name
7cwn3x3e.exe
Information
I. Lexmark 4076 Color Printer Driver for Microsoft Windows 3.1, 3.11
and Windows 95.
----------------------------------------------------------------
This driver will print with either the color or black cartridge by
changing driver setup.

************************* IMPORTANT NOTICE *************************
BEFORE USE OF THE PRODUCT YOU SHOULD CAREFULLY READ THE TERMS AND
CONDITIONS IN THE LICENSE.TXT FILE. USE OF THE PRODUCT INDICATES
YOUR ACCEPTANCE OF THESE TERMS & CONDITIONS. IF YOU DO NOT AGREE
WITH THESE TERMS & CONDITIONS, YOU SHOULD NOT INSTALL THIS PRODUCT.

II. INSTALLATION INSTRUCTIONS FOR WINDOWS 95

PART 1:
1. Before installing the driver, connect your ExecJet IIc to your computer
as directed in your User's Guide. Power on the printer and install the
color cartridge. After you start Windows 95, you will see a screen with
the following information:

New Hardware Found
ExecJet 4076 II

Note: If you do not see a screen entitled "New Hardware Found", skip the
rest of this section and go to the next section labeled PART 2.

2. Choose "Driver from disk provided by hardware manufacturer" and click OK.
3. Insert the diskette provided by Lexmark into your diskette drive when
prompted or enter the directory on your hard file where the driver files
are located (C:\LXKIIc).
4. Follow the instructions on the next screens to complete the installation
of your printer. When you see the printer name displayed, click "Next>",
and continue through the screens. You may choose to print a Test Page
with information about this driver if you like.
5. Windows 95 will copy the driver files to your system and then print the
test page if you have selected that option. The driver installation is
now complete. You should see the Lexmark 4076 ColorFine icon in your
Printer folder. Right click this icon and select "properties" to change
any settings in your driver. You do not need to continue to the
section labeled PART 2.

Notes: If your test page doesn't print correctly, check the front panel
of your printer. If the ink low and busy lights are flashing, this could
be an indication that you need to change your print cartridge. After
checking your cartridge, retry the test page.

If you see the New Hardware screen that is described above more than
once, click "Do not install a driver (Windows will not prompt you again)",
then click OK.

PART 2:
Complete this procedure only if you did not complete the installation
in PART 1 above.
1. Click START.
2. Choose "Settings", then "Printers".
3. Double-click "Add Printer".
4. Follow the instructions on the next screens to complete the
installation of your printer. Click "Have Disk" and insert a
diskette with this driver or point to the driver's location on your
hard disk (C:\LXKIIc) when prompted. When you see the printer name displayed,
click "Next>", and continue through the screens. If you want to
print a test page, make sure your printer is powered on and a color
print cartridge is installed.
5. Windows 95 will copy the driver files to your system and then print
the test page if you have selected that option. The driver
installation is now complete. You should see the Lexmark 4076
ColorFine icon in your Printer folder. Right-click this icon and
select "Properties" to change any settings in your driver.

Note: If you see a 'New Hardware Found' screen when you restart Windows 95,
click "Do not install a driver (Windows will not prompt you again)",
then click OK.
HelpDrivers Since March 2000