Lexmark 4076 Execjet II Download Drivers

Available 2 files for 4076 Execjet II
Company
Lexmark
Categories
Printers
Model
Lexmark 4076 Execjet II
Description
4076 Execjet II
Operating Systems
MS-Dos
Language Driver
English
Version Driver
1
Size Driver
18Kb
File Name
76dexx3e.exe
Company
Lexmark
Categories
Printers
Model
Lexmark 4076 Execjet II
Description
4076 Execjet II
Operating Systems
Windows 3.x-95
Language Driver
English
Version Driver
1.6
Size Driver
319Kb
File Name
76wn313e.exe
Information
I. IBM 4076 ExecJet II Printer Driver and Lexmark 4076 Mono Printer
Driver for Microsoft Windows 3.1
----------------------------------------------------------------

II. VERSION HISTORY:
Fixed problems with 32 bit applications under MicroSoft
Windows 95.

III. INSTALLATION INSTRUCTIONS:

WINDOWS 95:

PART 1:
1. Before installing the driver, connect your ExecJet II to your computer
as directed in your User's Guide. Power on the printer and install the
color cartridge. After you start Windows 95, you will see a screen with
the following information:

New Hardware Found
ExecJet 4076 II

Note: If you do not see a screen entitled "New Hardware Found", skip the
rest of this section and go to the next section labeled PART 2.

2. Choose "Driver from disk provided by hardware manufacturer" and click OK.
3. Insert the diskette provided by Lexmark into your diskette drive when
prompted or enter the directory on your hard file where the driver files
are located (ex: C:\LXK4076\ ).
4. Follow the instructions on the next screens to complete the installation
of your printer. When you see the printer name displayed, click "Next>",
and continue through the screens. You may choose to print a Test Page
with information about this driver if you like.
5. Windows 95 will copy the driver files to your system and then print the
test page if you have selected that option. The driver installation is
now complete. You should see the Lexmark 4076 icon in your
Printer folder. Right click this icon and select "properties" to change
any settings in your driver. You do not need to continue to the
section labeled PART 2.

If you see the New Hardware screen that is described above more than
once, click "Do not install a driver (Windows will not prompt you again)",
then click OK.

PART 2:
Complete this procedure only if you did not complete the installation
in PART 1 above.
1. Click START.
2. Choose "Settings", then "Printers".
3. Double-click "Add Printer".
4. Follow the instructions on the next screens to complete the
installation of your printer. Click "Have Disk" and insert a
diskette with this driver or point to the driver's location on your
hard disk when prompted (ex: C:\LXK4076). When you see the printer name
displayed, click "Next>", and continue through the screens. If you want to
print a test page, make sure your printer is powered on and a
print cartridge is installed.
5. Windows 95 will copy the driver files to your system and then print
the test page if you have selected that option. The driver
installation is now complete. You should see the Lexmark 4076
icon in your Printer folder. Right-click this icon and
select "Properties" to change any settings in your driver.


WINDOWS 3.1x Installation

1. Start Windows and select and open the MAIN program group.

2. Select and open the CONTROL PANEL program.
HelpDrivers Since March 2000