Lanier 5415 Download Drivers

Available 6 files for 5415
Company
Lanier
Categories
Printers
Model
Lanier 5415
Description
PCL5e
Operating Systems
Windows 2000
Version Driver
1.1
Size Driver
65Kb
File Name
5415_w2kpcl5en.exe
Info
These files are Windows 2000 drivers version 1.1 for the 5415 and 5415MFD
Company
Lanier
Categories
Printers
Model
Lanier 5415
Description
PCL5e
Operating Systems
Windows 95
Version Driver
3.90
Size Driver
290Kb
File Name
5415_w95pcl5.exe
Info
This floppy contains the PCL5e Printer Driver files for Windows95/98/NT4.0, and this document contains the following information:
1. Installation
2. Using the features
3. Network Printing
4. Canceling Printing
5. Error Recovery
1. Installation
1-1. It is recommended that you close all the applications before the installation, and the floppy is inserted in your PC.
(1) Select the "Setting" from "Start" button on the Windows.
(2) Click the "Printers" on the "Setting" menu.
(3) Click the "Add Printer" and follow the "Add Printer Wizard". The printer driver is available in the floppy. For the detailed instructions on the installing the printer driver,
please refer to the Operator's Manual.
1-2. To re-install the printer driver, it is recommended that you uninstall the current driver first. Remember you must always restart your computer when uninstall is completed.

2. Using the features
2-1. The optional memory is available to increase the performance and also optional tray2 is available.
2-2. Before you use the "custom" size shown on the driver, you need to define the paper size on the "User-Defined Size" dialog to the same setting as the copier machine. If the paper size is not the same as the machine setting,
the "Paper Size Error" will be occurred every page.
2-3. When the paper size on the copier machine is different from the driver setting, the print out image will be formatted based on the Tray 1 paper size setting from the machine panel.
2-4. It is recommended that you check the paper before printing from any paper source.
2-5. It is recommended that you only set 1 sheet of paper for each printing when you select the Bypass printing.
2-6. The printer driver for Windows NT doesn't support the soft font downloading and free size printing.
2-7. The memory size show on PC driver is not related to memory size on PCL5e board and this function is not support.

3. Network Printing
3-1. When you install the driver and are connecting it to the printer via peer-to-peer (P2P) port, you have to install the driver to the LPT port first, then install the peer-to-peer (P2P) utility.
3-2. When you install the Network Printer, it is recommended that you select the Local Printer and LPT port at first during installation, then change to your appropriate network port later, using the driver properties menu.
3-3. For highest transfer speed at printing via the NetWare Print Server from Windows NT 4.0, it is recommended that you uninstall the peer-to-peer (P2P) utility first.
You can use the "Add/Remove Programs" from the Windows Control Panel to uninstall the IP-P2P utility;
but always use uninstall feature in the directory of the IPX-P2P utility.

4. Canceling Printing
4-1. If you want to stop the printing during multiple-copy printing, it is recommended that you will cancel the active job from the machine panel.
After completion of the active page in the memory,the remained pages will be deleted automatically.If the succeed jobs are stored in the printer,
these jobs will be deleted also. To cancel the printing correctly,
please confirm that no job is transferred. And please cancel the print job in the queue on the host at first, when the host is transferring the job.

5. Error Recovery
5-1. When a paper jam occurs, the machine will stop printing immediately. After recovery, the printing will be resumed from jammed page.
5-2. When the specified paper goes empty, the machine will change the paper source automatically if the "Auto Select" is selected on the Printer driver.
At paper empty, the "Paper Empty" LED and "Paper Empty" message will be indicated on the machine panel.
When the paper is refilled,the remained pages or jobs will be printed automatically.

5-3. When the toner goes empty, the current job and received jobs already will be printed correctly. After completion, the printing will stop.
And the machine waits for the new cartridge.
Company
Lanier
Categories
Printers
Model
Lanier 5415
Description
PCL5e
Operating Systems
Windows 98
Version Driver
3.90
Size Driver
293Kb
File Name
5415_w98pcl5.exe
Info
This floppy contains the PCL5e Printer Driver files for Windows95/98/NT4.0, and this document contains the following information:
1. Installation
2. Using the features
3. Network Printing
4. Canceling Printing
5. Error Recovery
1. Installation
1-1. It is recommended that you close all the applications before the installation, and the floppy is inserted in your PC.
(1) Select the "Setting" from "Start" button on the Windows.
(2) Click the "Printers" on the "Setting" menu.
(3) Click the "Add Printer" and follow the "Add Printer Wizard". The printer driver is available in the floppy. For the detailed instructions on the installing the printer driver,
please refer to the Operator's Manual.
1-2. To re-install the printer driver, it is recommended that you uninstall the current driver first. Remember you must always restart your computer when uninstall is completed.

2. Using the features
2-1. The optional memory is available to increase the performance and also optional tray2 is available.
2-2. Before you use the "custom" size shown on the driver, you need to define the paper size on the "User-Defined Size" dialog to the same setting as the copier machine. If the paper size is not the same as the machine setting,
the "Paper Size Error" will be occurred every page.
2-3. When the paper size on the copier machine is different from the driver setting, the print out image will be formatted based on the Tray 1 paper size setting from the machine panel.
2-4. It is recommended that you check the paper before printing from any paper source.
2-5. It is recommended that you only set 1 sheet of paper for each printing when you select the Bypass printing.
2-6. The printer driver for Windows NT doesn't support the soft font downloading and free size printing.
2-7. The memory size show on PC driver is not related to memory size on PCL5e board and this function is not support.

3. Network Printing
3-1. When you install the driver and are connecting it to the printer via peer-to-peer (P2P) port, you have to install the driver to the LPT port first, then install the peer-to-peer (P2P) utility.
3-2. When you install the Network Printer, it is recommended that you select the Local Printer and LPT port at first during installation, then change to your appropriate network port later, using the driver properties menu.
3-3. For highest transfer speed at printing via the NetWare Print Server from Windows NT 4.0, it is recommended that you uninstall the peer-to-peer (P2P) utility first.
You can use the "Add/Remove Programs" from the Windows Control Panel to uninstall the IP-P2P utility;
but always use uninstall feature in the directory of the IPX-P2P utility.

4. Canceling Printing
4-1. If you want to stop the printing during multiple-copy printing, it is recommended that you will cancel the active job from the machine panel.
After completion of the active page in the memory,the remained pages will be deleted automatically.If the succeed jobs are stored in the printer,
these jobs will be deleted also. To cancel the printing correctly,
please confirm that no job is transferred. And please cancel the print job in the queue on the host at first, when the host is transferring the job.

5. Error Recovery
5-1. When a paper jam occurs, the machine will stop printing immediately. After recovery, the printing will be resumed from jammed page.
5-2. When the specified paper goes empty, the machine will change the paper source automatically if the "Auto Select" is selected on the Printer driver.
At paper empty, the "Paper Empty" LED and "Paper Empty" message will be indicated on the machine panel.
When the paper is refilled,the remained pages or jobs will be printed automatically.

5-3. When the toner goes empty, the current job and received jobs already will be printed correctly. After completion, the printing will stop.
And the machine waits for the new cartridge.
Company
Lanier
Categories
Printers
Model
Lanier 5415
Description
Twain
Operating Systems
Windows 98
Version Driver
1.0
Size Driver
712Kb
File Name
5415_w98twain.exe
Info
The TWAIN_32 Driver Installation

On Windows 95, 98, NT4.0
1. Download the TWAIN driver
2. Run the self-extracting executable file from in the directory to which
you downloaded it.
3. Once the files are extracted, run the Setup.exe command icon.
4. The Driver installation menu will appear on the screen. Follow the
on-screen prompts until the installation is complete.

How to setup the Driver

When you run a program supported by the TWAIN_32 function, the program
will launch the TWAIN_32 Driver Interface. You can press SETUP. Then you
will see a small window, you can select the COM-port, and set the baud rate.
When you finish the setting, press "OK" to return the main screen.

How to see the help file

Press the help button to see the help.
==============================================================================
This document contains information about Lanier 5415 MFD TWAIN_32 Driver.
Topics discussed in this document include:

*Files needed to be installed in your Windows environment.
*Specification
*Trouble Shooting

------------------------------------------------------------------------------
Files needed to be installed in your Windows environment
------------------------------------------------------------------------------
The following files will be install in your system.
LANI5415.ds
LANI5415.dll
Twa4mfc.hlp
Twain.dll
Twain_32.dll
Twunk_32.EXE

------------------------------------------------------------------------------
Specifications
------------------------------------------------------------------------------
Lanier 5415 MFD TWAIN_32 Driver is for Windows95, 98, NT V4.0 or up

It supports B/W and photo mode.

Resolutions:
1. 200 dpi x 100 dpi.
2. 200 dpi x 200 dpi.
3. 300 dpi x 300 dpi.

Paper Sizes:
There are three paper sizes supported: A4, Letter and Legal.

Baud Rate:
38400 bps.
19200 bps.

Port: COM1, COM2, COM3, COM4, are all supported.

------------------------------------------------------------------------------
Troubleshooting
------------------------------------------------------------------------------
1. After correctly installing the Lanier 5415MFD TWAIN_32 Driver, try using
an application to activate the TWAIN_32 Driver by selecting "Select Source"
which is usually found in the File menu.
When a dialog box appears choose "Lanier 5415MFD" and close this dialog box.

*If "Lanier 5415 MFD" does not exist, please make sure the following items
exist in your Windows\Twain_32\Mfd directory, LANI5415.ds, LANI5415.dll,
Twa4mfc.hlp files. If not, please quit all applications and reinstall
Lanier 5415 MFD TWAIN_32 Driver.
Company
Lanier
Categories
Printers
Model
Lanier 5415
Description
PCL5e
Operating Systems
Windows NT4
Version Driver
3.91
Size Driver
258Kb
File Name
5415_nt4pcl5.exe
Info
This floppy contains the PCL5e Printer Driver files for Windows95/98/NT4.0, and this document contains the following information:
1. Installation
2. Using the features
3. Network Printing
4. Canceling Printing
5. Error Recovery
1. Installation
1-1. It is recommended that you close all the applications before the installation, and the floppy is inserted in your PC.
(1) Select the "Setting" from "Start" button on the Windows.
(2) Click the "Printers" on the "Setting" menu.
(3) Click the "Add Printer" and follow the "Add Printer Wizard". The printer driver is available in the floppy. For the detailed instructions on the installing the printer driver,
please refer to the Operator's Manual.
1-2. To re-install the printer driver, it is recommended that you uninstall the current driver first. Remember you must always restart your computer when uninstall is completed.

2. Using the features
2-1. The optional memory is available to increase the performance and also optional tray2 is available.
2-2. Before you use the "custom" size shown on the driver, you need to define the paper size on the "User-Defined Size" dialog to the same setting as the copier machine. If the paper size is not the same as the machine setting,
the "Paper Size Error" will be occurred every page.
2-3. When the paper size on the copier machine is different from the driver setting, the print out image will be formatted based on the Tray 1 paper size setting from the machine panel.
2-4. It is recommended that you check the paper before printing from any paper source.
2-5. It is recommended that you only set 1 sheet of paper for each printing when you select the Bypass printing.
2-6. The printer driver for Windows NT doesn't support the soft font downloading and free size printing.
2-7. The memory size show on PC driver is not related to memory size on PCL5e board and this function is not support.

3. Network Printing
3-1. When you install the driver and are connecting it to the printer via peer-to-peer (P2P) port, you have to install the driver to the LPT port first, then install the peer-to-peer (P2P) utility.
3-2. When you install the Network Printer, it is recommended that you select the Local Printer and LPT port at first during installation, then change to your appropriate network port later, using the driver properties menu.
3-3. For highest transfer speed at printing via the NetWare Print Server from Windows NT 4.0, it is recommended that you uninstall the peer-to-peer (P2P) utility first.
You can use the "Add/Remove Programs" from the Windows Control Panel to uninstall the IP-P2P utility;
but always use uninstall feature in the directory of the IPX-P2P utility.

4. Canceling Printing
4-1. If you want to stop the printing during multiple-copy printing, it is recommended that you will cancel the active job from the machine panel.
After completion of the active page in the memory,the remained pages will be deleted automatically.If the succeed jobs are stored in the printer,
these jobs will be deleted also. To cancel the printing correctly,
please confirm that no job is transferred. And please cancel the print job in the queue on the host at first, when the host is transferring the job.

5. Error Recovery
5-1. When a paper jam occurs, the machine will stop printing immediately. After recovery, the printing will be resumed from jammed page.
5-2. When the specified paper goes empty, the machine will change the paper source automatically if the "Auto Select" is selected on the Printer driver.
At paper empty, the "Paper Empty" LED and "Paper Empty" message will be indicated on the machine panel.
When the paper is refilled,the remained pages or jobs will be printed automatically.

5-3. When the toner goes empty, the current job and received jobs already will be printed correctly. After completion, the printing will stop.
And the machine waits for the new cartridge.
Company
Lanier
Categories
Printers
Model
Lanier 5415
Description
Twain
Operating Systems
Windows NT4-2000
Version Driver
3.91
Size Driver
712Kb
File Name
5415_nt4w2ktwain.exe
Info
The TWAIN_32 Driver Installation

On Windows 95, 98, NT4.0
1. Download the TWAIN driver
2. Run the self-extracting executable file from in the directory to which
you downloaded it.
3. Once the files are extracted, run the Setup.exe command icon.
4. The Driver installation menu will appear on the screen. Follow the
on-screen prompts until the installation is complete.

How to setup the Driver

When you run a program supported by the TWAIN_32 function, the program
will launch the TWAIN_32 Driver Interface. You can press SETUP. Then you
will see a small window, you can select the COM-port, and set the baud rate.
When you finish the setting, press "OK" to return the main screen.

How to see the help file

Press the help button to see the help.
==============================================================================
This document contains information about Lanier 5415 MFD TWAIN_32 Driver.
Topics discussed in this document include:

*Files needed to be installed in your Windows environment.
*Specification
*Trouble Shooting

------------------------------------------------------------------------------
Files needed to be installed in your Windows environment
------------------------------------------------------------------------------
The following files will be install in your system.
LANI5415.ds
LANI5415.dll
Twa4mfc.hlp
Twain.dll
Twain_32.dll
Twunk_32.EXE

------------------------------------------------------------------------------
Specifications
------------------------------------------------------------------------------
Lanier 5415 MFD TWAIN_32 Driver is for Windows95, 98, NT V4.0 or up

It supports B/W and photo mode.

Resolutions:
1. 200 dpi x 100 dpi.
2. 200 dpi x 200 dpi.
3. 300 dpi x 300 dpi.

Paper Sizes:
There are three paper sizes supported: A4, Letter and Legal.

Baud Rate:
38400 bps.
19200 bps.

Port: COM1, COM2, COM3, COM4, are all supported.

------------------------------------------------------------------------------
Troubleshooting
------------------------------------------------------------------------------
1. After correctly installing the Lanier 5415MFD TWAIN_32 Driver, try using
an application to activate the TWAIN_32 Driver by selecting "Select Source"
which is usually found in the File menu.
When a dialog box appears choose "Lanier 5415MFD" and close this dialog box.

*If "Lanier 5415 MFD" does not exist, please make sure the following items
exist in your Windows\Twain_32\Mfd directory, LANI5415.ds, LANI5415.dll,
Twa4mfc.hlp files. If not, please quit all applications and reinstall
Lanier 5415 MFD TWAIN_32 Driver.
HelpDrivers Since March 2000