Available 4 files for Kyocera RC-2310L
Select Files
Company
Kyocera
Categories
Printers
Serie
Kyocera RC Series
Model
Kyocera RC-2310L
Description
PLC
Operating System
Windows 2000
Version
1.00
Size Driver
634KB
File Name
2310enmini2kr100.exe
Observations
1. Description
This application is a printer driver for Microsoft(R) Windows(TM) 2000.
2. Requirements
Software: Microsoft Windows 2000
Hardware: A true IBM PC/AT compatible computer
Minimum 133 MHz Pentium processor recommended
64 MB of RAM recommended
10 MB of free hard disk space
One IEEE1284 bi-directional parallel
printer cable
Printer: 2310/3010
3. Installation
To install this printer driver, please follow the instructions below:
From Add Printer
1) Start Windows.
2) Click the Start button, point to Settings, and then click
Printers.
3) Double-click Add Printer.
4) Follow the instructions on the screen.
5) When the driver files are required, please select "OEMPRINT.INF" file from
its printer driver folder.
6) When the "Digital Signature" screen appears during installation, please select "Yes"
and continue installing.
7) 2310/3010(PCL) printer as default printer.
If there are any optional devices (Paper Feeder,Output Device ) attached to your printer
or if you have extended the printer memory, please follow the next directions after
installing the printer driver.
8) Click "2310/3010(PCL)" icon with the right mouse button,
and click "Properties".
9) Set optional devices under "Installable Options".
10) Click "OK" or "Apply" and the setting willl become effective.
NOTE:
Please execute following operations to upgrade printer driver from old one to new one.
1.Before installing new driver, please remove old driver,
and restart the PC.
2.Please refer to "4. Uninstall" when removing the old driver.
3.We recommend you to restart your PC after removing the old driver.
(The driver file may not be completely removed from your PC.)
4. Uninstall
To uninstall this driver, please follow the instructions below:
1) Click the Start button, point to "Settings", and then click "Printers".
Click "2310/3010(PCL)" icon with the right mouse button,
and click "Delete".
2) Follow the instructions on the screen.
3) Next, remove the unnecessary Driver File (Driver File:3a0pcl.dll, 3a0pclua.gpd)
from your PC.
Click "File" button, and point "Server Properties".
Click "Driver" Tab in the display.
Select "2310/3010(PCL)", and then point "Remove".
5. Notes and restrictions
Notes
1) If you print a job using the Sort mode on this printer,
do not select Collate option in the Print dialog box of
the application software.
2) If you want to print a job using the Sort mode,
open the Printer Driver screen and click "Advanced" button.
"Collated" will appear if you set Copy Count at "2" or more but this does not
mean that Sort mode is ready.
For this printer, please select "On" under "Collate at Printer" in the same screen.
Company
Kyocera
Categories
Printers
Serie
Kyocera RC Series
Model
Kyocera RC-2310L
Description
PLC
Operating System
Windows 3.x
Version
1.10
Size Driver
898KB
File Name
2310enmini3xr110.exe
Observations
1. Description
This application are PCL5e / PCL6 printer driver
for Microsoft(R) Windows(TM) 3.1x.
2. Requirements
Software: Microsoft Windows 3.1x
Hardware: A true IBM PC/AT compatible computer
Minimum 90 MHz Pentium processor recommended
32 MB of RAM recommended
10 MB of free hard disk space
One IEEE1284 bi-directional parallel
printer cable
Printer: 2310/3010
3. Installation
Before printing on this printer, you should install
this printer driver software.
Please look at the Instraction Hand book.
4. Uninstall
Remove the printer driver before starting print jobs.
If you remove it after printing, all files of the printer driver might
not be able to be deleted.
Please look at the Instraction Hand book.
5. Notes
1) If you print a job using the Group mode or Sort mode on
this printer, do not select Collate option in the Print
dialog box of the application software.
2) When printer error occurs, please cancel the print job by
pushing "Cancel Job" on printer display at the machine.
If you canceled your print job from your PC, be sure to
operate "reset" at printer display at the machine.
3) When using layout function with custom size paper,sometimes
will not print correctly.
4) If your PC is using ECP printer port, sometimes WinPanel
will not operate correctly. When WinPanel doesn't operate
correctly, change your PC setting to printer port.
5) When HDD is not installed, and there are not enough memory,
finisher may not recover jam correctly.
Company
Kyocera
Categories
Printers
Serie
Kyocera RC Series
Model
Kyocera RC-2310L
Description
PCL5e, PCL6, and PostScript Print Driver
Operating System
Windows 95-98
Version
1.20
Size Driver
856KB
File Name
2310enmini9xr120.exe
Observations
1. Description
This application are PCL5e / PCL6 / PS printer driver
for Microsoft(R) Windows(TM) 95/98.
2. Requirements
Software: Microsoft Windows 95/98
Hardware: A true IBM PC/AT compatible computer
Minimum 90 MHz Pentium processor recommended
32 MB of RAM recommended
10 MB of free hard disk space
One IEEE1284 bi-directional parallel
printer cable
Printer: 2310/3010
3. Installation
There are two way to install these driver.
Before printing on this printer, you should install
this printer driver software.
(A)From Add Printer
1) Start Windows and insert CD-ROM into the appropriate
drive.
2) Click the Start button, point to Settings, and then click
Printers.
3) Double-click Add Printer.
4) Follow the instructions on the screen.
5) When you are required the driver files, you select
"
6) Set 2310/3010 PCL5e, 2310/3010 PCL6 or 2310/3010 PS
printer as default printer.
(B)From install.exe
Please look at the Instraction Hand book.
4. Uninstall
There are two way to uninstall these driver.
Remove the printer driver before starting print jobs.
If you remove it after printing, all files of the printer driver might
not be able to be deleted.
--In case you install by method (A)--
1) Click the Start button, point to Settings, and then click
Printers.
Click 2310/3010 PCL5e, 2310/3010 PCL6 or 2310/3010 PS icon
with the right mouse button, and click Delete.
2) Follow the instructions on the screen.
--In case you install by method (B)--
Please look at the Instraction Hand book.
5. Notes
1) If you print a job using the Group mode or Sort mode on
this printer, do not select Collate option in the Print
dialog box of the application software.
2) When using layout function with custom size paper,sometimes
will not print correctly.
3) If your PC is using ECP printer port, sometimes WinPanel
will not operate correctly. When WinPanel doesn't operate
correctly, change your PC setting to printer port.
4) When HDD is not installed, and there are not enough memory,
finisher may not recover jam correctly.
5) Printer function settings are not available in printing with
PS driver in Adobe Pagemaker.
Follow the procedure below to use function settings.
1.Copy \Disks\English\Pmppd\Pmps.ppd from
CD-ROM(Ver1.20 or later) to the folder Pagemaker
is installed in.
(Ex.As for Ver6.5, C:\Pm65\Rsrc\**English\Ppd4\..)
Company
Kyocera
Categories
Printers
Serie
Kyocera RC Series
Model
Kyocera RC-2310L
Description
PCL5e, PCL6, and PostScript Print Driver
Operating System
Windows NT
Version
1.10
Size Driver
782KB
File Name
2310enminintr110.exe
Observations
1. Description
This application are PCL5e / PCL6 / PS printer driver
for Microsoft(R) Windows(TM) NT4.0.
2. Requirements
Software: Microsoft Windows NT4.0
Hardware: A true IBM PC/AT compatible computer
Minimum 90 MHz Pentium processor recommended
32 MB of RAM recommended
10 MB of free hard disk space
One IEEE1284 bi-directional parallel
printer cable
Printer: 2310/3010
3. Installation
There are two way to install these driver.
Before printing on this printer, you should install
this printer driver software.
(A)From Add Printer
1) Start Windows and insert CD-ROM into the appropriate
drive.
2) Click the Start button, point to Settings, and then click
Printers.
3) Double-click Add Printer.
4) Follow the instructions on the screen.
5) When you are required the driver files, you select
"
6) Set 2310/3010 PCL5e, 2310/3010 PCL6 or 2310/3010 PS
printer as default printer.
(B)From install.exe
Please look at the Instraction Hand book.
4. Uninstall
There are two way to uninstall these driver.
Remove the printer driver before starting print jobs.
If you remove it after printing, all files of the printer driver might
not be able to be deleted.
--In case you install by method (A)--
1) Click the Start button, point to Settings, and then click
Printers.
Click 2310/3010 PCL5e, 2310/3010 PCL6 or 2310/3010 PS icon
with the right mouse button, and click Delete.
2) Follow the instructions on the screen.
--In case you install by method (B)--
Please look at the Instraction Hand book.
5. Notes
1) If you print a job using the Group mode or Sort mode on
this printer, do not select Collate option in the Print
dialog box of the application software.
2) When using layout function with custom size paper,sometimes
will not print correctly.
3) If your PC is using ECP printer port, sometimes WinPanel
will not operate correctly. When WinPanel doesn't operate
correctly, change your PC setting to printer port.
4) When HDD is not installed, and there are not enough memory,
finisher may not recover jam correctly.
5) Printer function settings are not available in printing with
PS driver in Adobe Pagemaker.
Follow the procedure below to use function settings.
1.Copy \Disks\English\Pmppd\Pmps.ppd from
CD-ROM(Ver1.20 or later) to the folder Pagemaker
is installed in.
(Ex.As for Ver6.5, C:\Pm65\Rsrc\**English\Ppd4\..)
Access to Official Website Kyocera
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.