Kyocera RC-2000d Download Drivers and Utilities

1. Description
This application is a printer driver for Microsoft(R) Windows(TM) 2000.

2. Requirements
Software: Microsoft Windows 2000
Hardware: A true IBM PC/AT compatible computer
Minimum 133 MHz Pentium processor recommended
64 MB of RAM recommended
10 MB of free hard disk space
One IEEE1284 bi-directional parallel
printer cable
Printer: Ai 2020 / 2000d

3. Installation
To install this printer driver, please follow the instructions below:

From Add Printer
1) Start Windows.
2) Click the Start button, point to Settings, and then click
Printers.
3) Double-click Add Printer.
4) Follow the instructions on the screen.
5) When the driver files are required, please select "OEMPRINT.INF" file from
its printer driver folder.
6) When the "Digital Signature" screen appears during installation, please select "Yes"
and continue installing.
7) Ai 2020 / 2000d(PCL) printer as default printer.

If there are any optional devices (Paper Feeder) attached to your printer
or if you have extended the printer memory, please follow the next directions after
installing the printer driver.
8) Click "Ai 2020 / 2000d (PCL)" icon with the right mouse button,
and click "Properties".
9) Set optional devices under "Installable Options".
10) Click "OK" or "Apply" and the setting willl become effective.

NOTE:
Please execute following operations to upgrade printer driver from old one to new one.
1.Before installing new driver, please remove old driver,
and restart the PC.
2.Please refer to "4. Uninstall" when removing the old driver.
3.We recommend you to restart your PC after removing the old driver.
(The driver file may not be completely removed from your PC.)

4. Uninstall
To uninstall this driver, please follow the instructions below:
1) Click the Start button, point to "Settings", and then click "Printers".
Click "Ai 2020 / 2000d(PCL)" icon with the right mouse button,
and click "Delete".
2) Follow the instructions on the screen.
3) Next, remove the unnecessary Driver File (Driver File:3ajpcl.dll, 3ajpclua.gpd)
from your PC.
Click "File" button, and point "Server Properties".
Click "Driver" Tab in the display.
Select "Ai 2020 / 2000d(PCL)", and then point "Remove".


5. Notes and restrictions

Notes
1) Other printer drivers may affect a print job, which can cause improper printout.
Remove some or all your other printer drivers and start the print job again.

2) In some cases, you may fail to reach the printer driver screen
from the printing option in the application. If you desire to change
printer settings, please go to "Printer" which you can find
in "My Computer".
Click "Ai 2020 / 2000d(PCL)" icon with the right mouse button,
click "Printing Preferances.." and set the printer feature.

[Version]
Signature=$CHICAGO$
Class=Printer
Provider=%String0%

[ClassInstall]

[Manufacturer]
%String1%=DRIVER

[DRIVER]
%String2%=PCL3AJ.DRV,LPTENUM\PRINTING_SYSTEM_(E)880D,PRINTINGSYSTEM(E)

[PCL3AJ.DRV]
CopyFiles=DriverFiles
DataSection=DriverData

[DriverFiles]
PCL3AJ.DRV
PCL3AJ.HLP
PCL3AJ.INI

[ControlFlags]

[DefaultInstall]
CopyFiles=DriverFiles

[DriverData]
DefaultDataType=EMF

[SourceDisksNames]
1=%DiskID1%,DISK_1,0000-0000

[SourceDisksFiles]
PCL3AJ.DRV=1

[Strings]
String0="MITA"
String1="MITA"
String2="Ai 2020 / 2000d"
DiskID1="Ai 2020 / 2000d"

Ai2020/RC-2000d Windows NT IP Configurator for Peer to Peer Networking.

1. Description
This printer driver is compatible for use with Microsoft(R) Windows(TM) NT 4.0
This Read Me file includes notes and restrictions on its use.

Windows NT is a registered trademark of Microsoft Corporation.

2. Minimum System Requirements for Ai 2020 / 2000d printer

The minimum requirements are:
- Windows NT 4.0
- 486DX/33MHz processor or greater
- 8MB RAM
- 10MB Disk space
- Bi-Directional Centronics Cable

3. Notes and restrictions

Please make sure that the box marked "Always spool RAW data" in the Ai-2020 print driver
properties\Print Proccesor. If this is not checked unexpected results may occur!!

Microsoft Word
If the "Collate" function is selected in the print dialogue box and if many
copies are printed, the document will be printed incorrectly as follows:-

1. In the case of printing a document containing an odd number of pages:
in the duplex printing, the first page will be printed on the back of the
last page.
in the 2up printing, the first page will be printed next to the last page.

2. In the case of printing a document containing pages which are not a multi-
plication of 4 in the 4up printing, the first page will be printed after the
last page.
Please deselect the "Collate" function before printing the document.
A watermark may be printed in an incorrect position with the following settings.
Orientation: Landscape / Page Layout: 2up