Available 1 files for MP 6000- MP Design SP1 1.4.59 SP1
Imaje MP 6000- MP Design SP1 1.4.59 SP1
(Note: Windows NT 4.0 Terminal Server is not supported)
Before installing this printer driver Imaje MP 6000- MP Design SP1 1.4.59 SP1, read the following precautions:
Before starting the installation of drivers, connect your printer Imaje MP 6000- MP Design SP1 1.4.59 SP1 to your computer, and that the printer is powered On.
See your printer manual for details.
Important! Do not turn printer off, remove cables, or unplug the printer, or interrupt it in any way during the driver installation process.
Close virus protection programs or other software programs that are running on your computer.
You must have full-control access to MP 6000- MP Design SP1 1.4.59 SP1 printer settings to carry out an
installation. Before starting the installation of drivers, log in as a member of the
If you have an earlier version of the Imaje printer driver installed on your
computer, you must remove it with the uninstaller before installing
the new driver for Imaje MP 6000- MP Design SP1 1.4.59 SP1.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the driver in and click Save.
Locate the driver file using Windows Explorer when the download has completed.
Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive.
The directory these driver are extracted to will have a similar name to the printer model that was downloaded (i.e., c:\MP 6000- MP Design SP1 1.4.59 SP1). The setup program will also automatically begin running after extraction.
However, automatically running setup can be unchecked at the time of extracting the driver file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer driver if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\MP 6000- MP Design SP1 1.4.59 SP1).
Click on the file ending with .inf .
Click Open and then Okay and let driver files install.
Add the printer MP 6000- MP Design SP1 1.4.59 SP1 if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Driver Wizard.
Search and consult the Readme file for additional installation drivers instructions for your printer Imaje MP 6000- MP Design SP1 1.4.59 SP1.
Depending on the environment that you are using, a Windows printer driver provided by Microsoft may be installed automatically on your computer. However, it is recommended that you use this official printer driver provided by Imaje for MP 6000- MP Design SP1 1.4.59 SP1 printer.