7 files availables for HP LaserJet 1020
7 files availables in English for HP LaserJet 1020
Select another language here :
Company
Hewlett Packard
Categories
Printers
Model
Hewlett Packard HP LaserJet 1020
Description
Full Feature Software and Drivers
Operating Systems
Windows 2000-2003-XP
Language Driver
English
Version Driver
4.0
Size Driver
367.8Mb
File Name
hp_lj_1020-1022_full_solution.exe
Info
The full software solution provides print functionality. This software solution is the same solution as the Version 4.0 in-box CD that came with your HP LaserJet 1020/1022.
This is not a software upgrade of the software prior to 4.0. If a prior version of the HP LaserJet 1020/1022 software is currently installed, it must be uninstalled before installing this version.
NOTE: This package does NOT support Windows Vista.
Incorrect margin on paper when using A4 paper to print
Windows Logo Testing error during installation
Operating system(s): Microsoft Windows 2000, Microsoft Windows XP, Microsoft Windows Server 2003
Download file size: 367.86M
System Requirements
Approximately 1 GB of hard disk space is require to use this download
Minimum Installation Requirements:
A Pentium (133 MHz) processor or greater
128 MB of RAM
368 MB of available hard disk space
SVGA 800x66 16-bit color display
Typical Installation Requirements:
A Pentium II (233 MHz) processor or greater
256 MB of RAM
1 GB of available hard disk space
SVGA 800x600 16-bit color display
Installation Instructions
This section will help you in the download of the software to your computer and start you on the install process. Below are easy-to-follow instructions for downloading and installing printer drivers.
Approximately 1 GB of hard disk space is required to use this download.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the hp_LJ1020-1022_Full_Solution.exe file using Windows Explorer when the download has completed and double-click it to extract its contents.
The files in the package will be extracted c:\hp_LJ1020-1022_Full_Solution by default. During extraction, you can change the folder to extract the files to if necessary.
The install will be started automatically at the end of the extraction process.
Follow the on-screen instructions.
To use the already extracted files for another installation, begin the install by double-clicking on the autorun.exe file in the extraction folder.
NOTE: After the installation is complete the downloaded hp_LJ1020-1022_Full_Solution.exe file and the extraction folder (by default: C:\hp_LJ1020-1022_Full_Solution) can be deleted to up 935 MB of hard disk space.
This is not a software upgrade of the software prior to 4.0. If a prior version of the HP LaserJet 1020/1022 software is currently installed, it must be uninstalled before installing this version.
NOTE: This package does NOT support Windows Vista.
Incorrect margin on paper when using A4 paper to print
Windows Logo Testing error during installation
Operating system(s): Microsoft Windows 2000, Microsoft Windows XP, Microsoft Windows Server 2003
Download file size: 367.86M
System Requirements
Approximately 1 GB of hard disk space is require to use this download
Minimum Installation Requirements:
A Pentium (133 MHz) processor or greater
128 MB of RAM
368 MB of available hard disk space
SVGA 800x66 16-bit color display
Typical Installation Requirements:
A Pentium II (233 MHz) processor or greater
256 MB of RAM
1 GB of available hard disk space
SVGA 800x600 16-bit color display
Installation Instructions
This section will help you in the download of the software to your computer and start you on the install process. Below are easy-to-follow instructions for downloading and installing printer drivers.
Approximately 1 GB of hard disk space is required to use this download.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the hp_LJ1020-1022_Full_Solution.exe file using Windows Explorer when the download has completed and double-click it to extract its contents.
The files in the package will be extracted c:\hp_LJ1020-1022_Full_Solution by default. During extraction, you can change the folder to extract the files to if necessary.
The install will be started automatically at the end of the extraction process.
Follow the on-screen instructions.
To use the already extracted files for another installation, begin the install by double-clicking on the autorun.exe file in the extraction folder.
NOTE: After the installation is complete the downloaded hp_LJ1020-1022_Full_Solution.exe file and the extraction folder (by default: C:\hp_LJ1020-1022_Full_Solution) can be deleted to up 935 MB of hard disk space.
Company
Hewlett Packard
Categories
Printers
Model
Hewlett Packard HP LaserJet 1020
Description
Basic Plug and Play Driver
Operating Systems
Windows 2000-2003-XP-Vista
Language Driver
English
Version Driver
20070518
Size Driver
4.7Mb
File Name
lj1020-hb-pnp-winxp2kv32-en.exe
Info
This download is intended for first time installation of the HP LaserJet 1020 printer driver via a USB connection. If you are upgrading the print driver, use the "HP LaserJet 1020 Driver" package rather than this "Plug and Play Package". The drivers contained in this download are the same drivers found on HP LaserJet 1020 version 5.0 CD that is currently available on the web and is scheduled to soft roll in the box with the printer. Use this software for first time USB installations only. Do NOT attach USB cable until prompted by the installation program.
The HP LaserJet Basic Plug and Play Bundle provides the following:
An EZInstall program to assist with installation.
Plug and Play installable printer driver (same drivers found on version 5.0 CD inbox with printer.)
A silent install is provided by running the program from a DOS prompt with the following command line parameters: lj1020-HB-pnp-win2kxpv32-en.exe -s -a -silent
Original Software/Drivers
Operating system(s): Microsoft Windows 2000, Microsoft Windows XP, Microsoft Windows Vista, Microsoft Windows Server 2003
Download file size: 4.8M
System Requirements
No additional prerequisites
Installation Instructions
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Close any software programs running on your computer.
Click the Download button and a File Download box will appear.
Select Save and a Save As box will appear.
Select a directory to save the file in and click Save. Remember the location of the saved file.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The default directory is C:\Program Files\Hewlett-Packard\LaserJet 1020 Drivers. However, you can change the path and directory name at the time of extracting the file.
Click Next after the file extraction is complete and follow the instructions presented by the EZInstall program. Do NOT attach the USB cable to the printer until prompted by the EZInstall program.
The HP LaserJet Basic Plug and Play Bundle provides the following:
An EZInstall program to assist with installation.
Plug and Play installable printer driver (same drivers found on version 5.0 CD inbox with printer.)
A silent install is provided by running the program from a DOS prompt with the following command line parameters: lj1020-HB-pnp-win2kxpv32-en.exe -s -a -silent
Original Software/Drivers
Operating system(s): Microsoft Windows 2000, Microsoft Windows XP, Microsoft Windows Vista, Microsoft Windows Server 2003
Download file size: 4.8M
System Requirements
No additional prerequisites
Installation Instructions
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Close any software programs running on your computer.
Click the Download button and a File Download box will appear.
Select Save and a Save As box will appear.
Select a directory to save the file in and click Save. Remember the location of the saved file.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The default directory is C:\Program Files\Hewlett-Packard\LaserJet 1020 Drivers. However, you can change the path and directory name at the time of extracting the file.
Click Next after the file extraction is complete and follow the instructions presented by the EZInstall program. Do NOT attach the USB cable to the printer until prompted by the EZInstall program.
Company
Hewlett Packard
Categories
Printers
Model
Hewlett Packard HP LaserJet 1020
Description
Basic Print Driver
Operating Systems
Windows 2000-2003-XP-Vista
Language Driver
English
Version Driver
20070518
Size Driver
4.7Mb
File Name
lj1020-hb-pd-winxp2kv32-en.exe
Info
Use this software for first time USB installations only. Do NOT attach a USB cable until prompted by the installation program. The driver contained in this download package is the host-based printer driver for Microsoft Windows 2000, XP (32-bit), Server 2003 (32-bit) and Vista 32 bit.
An installation program to assist with installation.
Driver package with silent installer.
Original Software/Drivers
Operating system(s): Microsoft Windows 2000, Microsoft Windows XP, Microsoft Windows Vista, Microsoft Windows Server 2003
Download file size: 4.8M
System Requirements
No additional prerequisites
Installation Instructions
Before proceeding with the software installation, the printer must first be properly set up.
Close any software programs running on your computer.
Click the Download button and a File Download box will appear.
Select Save and a Save As box will appear.
Select a directory to save the file in and click Save. Remember the location of the saved file.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The default directory is C:\Program Files\Hewlett-Packard\LaserJet 1020 Drivers. However, you can change the path and directory name at the time of extracting the file.
Click Next after the file extraction is complete and follow the instructions presented by the install program. Do NOT attach the USB cable to the printer until prompted by the install program.
If a "Found new Hardware" screen appears, click "Locate and install driver software (recommended). (Windows Vista only).
After the installation is complete you can delete the file "lj1020-HB-pd-winxp2kv32-xx.exe" if desired.
An installation program to assist with installation.
Driver package with silent installer.
Original Software/Drivers
Operating system(s): Microsoft Windows 2000, Microsoft Windows XP, Microsoft Windows Vista, Microsoft Windows Server 2003
Download file size: 4.8M
System Requirements
No additional prerequisites
Installation Instructions
Before proceeding with the software installation, the printer must first be properly set up.
Close any software programs running on your computer.
Click the Download button and a File Download box will appear.
Select Save and a Save As box will appear.
Select a directory to save the file in and click Save. Remember the location of the saved file.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The default directory is C:\Program Files\Hewlett-Packard\LaserJet 1020 Drivers. However, you can change the path and directory name at the time of extracting the file.
Click Next after the file extraction is complete and follow the instructions presented by the install program. Do NOT attach the USB cable to the printer until prompted by the install program.
If a "Found new Hardware" screen appears, click "Locate and install driver software (recommended). (Windows Vista only).
After the installation is complete you can delete the file "lj1020-HB-pd-winxp2kv32-xx.exe" if desired.
Company
Hewlett Packard
Categories
Printers
Model
Hewlett Packard HP LaserJet 1020
Description
Basic Driver Printer
Operating Systems
Windows 98-Me
Language Driver
English
Version Driver
4.26.1022.310
Size Driver
1.3Mb
File Name
lj1020-1022-pcl5-win9x-en.exe
Info
Use this download package if you are updating the printer driver from a previous install or you want to add the printer driver. The driver contained in this download package is the driver compatible with Windows 98 and Windows ME.
As of June 30, 2007, HP's license to redistribute Microsoft's USB files for Windows 98 has expired and cannot be renewed. Thus, this Windows 98 driver does not include the Microsoft's USB files. The driver will install successfully on the USB port of a Windows 98 system if an HP printer has been successfully installed on the USB port on the system previously. The successful previous installation would have copied the USB files onto the Windows 98 operating system. So, if the Microsoft USB files are already on the Windows 98 system, then this driver, which does not include the Microsoft USB files, will install successfully.
Installing the printer over network (TCP/IP) or on the LPT port successfully does not require the Microsoft USB files. Since the Windows Millennium operating system has the Microsoft USB files, this driver should install successfully without a previous installation of an HP printer.
Original Software/Drivers
Operating system(s): Microsoft Windows 98, Microsoft Windows ME
Download file size: 1.38M
System Requirements
Microsoft Windows 98/ Windows Me
Installation Instructions
Before proceeding with the software installation, the printer must first be properly set up and powered on. An HP printer must have been previously installed on the USB port successfully and the computer rebooted. Note: this applies to all three printer models.
Close any programs running on your computer.
Click the Download button and a File Download box will appear.
Select Save and a Save As box will appear.
Select a folder into which to save the printer driver package and click Save. Make note of the folder path for later use.
Locate the downloaded file using Windows Explorer (after the download has completed).
Connect the printer to the system via USB and power it on.
Windows Found New Hardware Wizard should appear.
Click Next.
On the next screen ensure the radio button labeled "Search for the best driver for this device?" is selected,
Click Next.
Please verify only the checkbox labeled "Specify a Location" is checked.
Fill in the edit box with the path noted in step 5. Click Next.
Click Finish.
Now, the New Hardware Found Wizard will repeat the process for the printer driver portion of the install. Repeat steps 8-13 above for this portion. For Step 12 the path to the driver should already be filled out with the same path you used in the previous portion of the install, which is acceptable.
A new dialog will appear to name the printer. Leave the name as listed and simply click the Finish button.
Click Finish.
As of June 30, 2007, HP's license to redistribute Microsoft's USB files for Windows 98 has expired and cannot be renewed. Thus, this Windows 98 driver does not include the Microsoft's USB files. The driver will install successfully on the USB port of a Windows 98 system if an HP printer has been successfully installed on the USB port on the system previously. The successful previous installation would have copied the USB files onto the Windows 98 operating system. So, if the Microsoft USB files are already on the Windows 98 system, then this driver, which does not include the Microsoft USB files, will install successfully.
Installing the printer over network (TCP/IP) or on the LPT port successfully does not require the Microsoft USB files. Since the Windows Millennium operating system has the Microsoft USB files, this driver should install successfully without a previous installation of an HP printer.
Original Software/Drivers
Operating system(s): Microsoft Windows 98, Microsoft Windows ME
Download file size: 1.38M
System Requirements
Microsoft Windows 98/ Windows Me
Installation Instructions
Before proceeding with the software installation, the printer must first be properly set up and powered on. An HP printer must have been previously installed on the USB port successfully and the computer rebooted. Note: this applies to all three printer models.
Close any programs running on your computer.
Click the Download button and a File Download box will appear.
Select Save and a Save As box will appear.
Select a folder into which to save the printer driver package and click Save. Make note of the folder path for later use.
Locate the downloaded file using Windows Explorer (after the download has completed).
Connect the printer to the system via USB and power it on.
Windows Found New Hardware Wizard should appear.
Click Next.
On the next screen ensure the radio button labeled "Search for the best driver for this device?" is selected,
Click Next.
Please verify only the checkbox labeled "Specify a Location" is checked.
Fill in the edit box with the path noted in step 5. Click Next.
Click Finish.
Now, the New Hardware Found Wizard will repeat the process for the printer driver portion of the install. Repeat steps 8-13 above for this portion. For Step 12 the path to the driver should already be filled out with the same path you used in the previous portion of the install, which is acceptable.
A new dialog will appear to name the printer. Leave the name as listed and simply click the Finish button.
Click Finish.
Company
Hewlett Packard
Categories
Printers
Model
Hewlett Packard HP LaserJet 1020
Description
Basic Driver Printer
Operating Systems
Windows 98-Me
Language Driver
English
Version Driver
20060721.000
Size Driver
41.4Mb
File Name
lj1020-win9xme.exe
Info
Use this download package if you are updating the printer driver from a previous install or you want to add the printer driver. The driver contained in this download package is the driver compatible with Windows 98 and Windows ME.
As of June 30, 2007, HP's license to redistribute Microsoft's USB files for Windows 98 has expired and cannot be renewed. Thus, this Windows 98 driver does not include the Microsoft's USB files. The driver will install successfully on the USB port of a Windows 98 system if an HP printer has been successfully installed on the USB port on the system previously. The successful previous installation would have copied the USB files onto the Windows 98 operating system. So, if the Microsoft USB files are already on the Windows 98 system, then this driver, which does not include the Microsoft USB files, will install successfully.
Installing the printer over network (TCP/IP) or on the LPT port successfully does not require the Microsoft USB files. Since the Windows Millennium operating system has the Microsoft USB files, this driver should install successfully without a previous installation of an HP printer.
Original Software/Drivers
Operating system(s): Microsoft Windows 98, Microsoft Windows ME
Download file size: 41.47M
System Requirements
Microsoft Windows 98/ Windows Me
Installation Instructions
Before proceeding with the software installation, the printer must first be properly set up and powered on. An HP printer must have been previously installed on the USB port successfully and the computer rebooted. Note: this applies to all three printer models.
Close any programs running on your computer.
Click the Download button and a File Download box will appear.
Select Save and a Save As box will appear.
Select a folder into which to save the printer driver package and click Save. Make note of the folder path for later use.
Locate the downloaded file using Windows Explorer (after the download has completed).
Connect the printer to the system via USB and power it on.
Windows Found New Hardware Wizard should appear.
Click Next.
On the next screen ensure the radio button labeled "Search for the best driver for this device?" is selected,
Click Next.
Please verify only the checkbox labeled "Specify a Location" is checked.
Fill in the edit box with the path noted in step 5. Click Next.
Click Finish.
Now, the New Hardware Found Wizard will repeat the process for the printer driver portion of the install. Repeat steps 8-13 above for this portion. For Step 12 the path to the driver should already be filled out with the same path you used in the previous portion of the install, which is acceptable.
A new dialog will appear to name the printer. Leave the name as listed and simply click the Finish button.
Click Finish.
As of June 30, 2007, HP's license to redistribute Microsoft's USB files for Windows 98 has expired and cannot be renewed. Thus, this Windows 98 driver does not include the Microsoft's USB files. The driver will install successfully on the USB port of a Windows 98 system if an HP printer has been successfully installed on the USB port on the system previously. The successful previous installation would have copied the USB files onto the Windows 98 operating system. So, if the Microsoft USB files are already on the Windows 98 system, then this driver, which does not include the Microsoft USB files, will install successfully.
Installing the printer over network (TCP/IP) or on the LPT port successfully does not require the Microsoft USB files. Since the Windows Millennium operating system has the Microsoft USB files, this driver should install successfully without a previous installation of an HP printer.
Original Software/Drivers
Operating system(s): Microsoft Windows 98, Microsoft Windows ME
Download file size: 41.47M
System Requirements
Microsoft Windows 98/ Windows Me
Installation Instructions
Before proceeding with the software installation, the printer must first be properly set up and powered on. An HP printer must have been previously installed on the USB port successfully and the computer rebooted. Note: this applies to all three printer models.
Close any programs running on your computer.
Click the Download button and a File Download box will appear.
Select Save and a Save As box will appear.
Select a folder into which to save the printer driver package and click Save. Make note of the folder path for later use.
Locate the downloaded file using Windows Explorer (after the download has completed).
Connect the printer to the system via USB and power it on.
Windows Found New Hardware Wizard should appear.
Click Next.
On the next screen ensure the radio button labeled "Search for the best driver for this device?" is selected,
Click Next.
Please verify only the checkbox labeled "Specify a Location" is checked.
Fill in the edit box with the path noted in step 5. Click Next.
Click Finish.
Now, the New Hardware Found Wizard will repeat the process for the printer driver portion of the install. Repeat steps 8-13 above for this portion. For Step 12 the path to the driver should already be filled out with the same path you used in the previous portion of the install, which is acceptable.
A new dialog will appear to name the printer. Leave the name as listed and simply click the Finish button.
Click Finish.
Company
Hewlett Packard
Categories
Printers
Model
Hewlett Packard HP LaserJet 1020
Description
Basic Plug and Play Drivers
Operating Systems
Windows XP 64 bits-Vista 64 bits
Language Driver
English
Version Driver
20070518
Size Driver
5.5Mb
File Name
lj1020-hb-pnp-winv64-en.exe
Info
This download is intended for first time installation of the HP LaserJet 1020 printer driver via a USB connection. If you are upgrading the print driver, use the "HP LaserJet Basic Print Driver" package rather than this "Plug and Play Package". The drivers contained in this download are the same drivers found on HP LaserJet 1020 version 5.0 CD that is currently available on the web and is scheduled to soft roll in the box with the printer.Use this software for first time USB installations only. Do NOT attach USB cable until prompted by the installation program.
The HP LaserJet Basic Plug and Play Bundle provides the following:
An EZInstall program to assist with installation.
Plug and Play installable printer driver (same drivers found on version 5.0 CD inbox with printer.)
A silent install is provided by running the program from a DOS prompt with the following command line parameters: lj1020-HB-pnp-winv64-en.exe -s -a -silent
Original Software/Drivers
Operating system(s): Microsoft Windows Vista (64-bit), Microsoft Windows XP x64
Download file size: 5.54M
System Requirements
No additional prerequisites
Installation Instructions
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Close any software programs running on your computer.
Click the Download button and a File Download box will appear.
Select Save and a Save As box will appear.
Select a directory to save the file in and click Save. Remember the location of the saved file.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The default directory is C:\Program Files\Hewlett-Packard\LaserJet 1020 Drivers. However, you can change the path and directory name at the time of extracting the file.
Click Next after the file extraction is complete and follow the instructions presented by the EZInstall program. Do NOT attach the USB cable to the printer until prompted by the EZInstall program.
The HP LaserJet Basic Plug and Play Bundle provides the following:
An EZInstall program to assist with installation.
Plug and Play installable printer driver (same drivers found on version 5.0 CD inbox with printer.)
A silent install is provided by running the program from a DOS prompt with the following command line parameters: lj1020-HB-pnp-winv64-en.exe -s -a -silent
Original Software/Drivers
Operating system(s): Microsoft Windows Vista (64-bit), Microsoft Windows XP x64
Download file size: 5.54M
System Requirements
No additional prerequisites
Installation Instructions
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Close any software programs running on your computer.
Click the Download button and a File Download box will appear.
Select Save and a Save As box will appear.
Select a directory to save the file in and click Save. Remember the location of the saved file.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The default directory is C:\Program Files\Hewlett-Packard\LaserJet 1020 Drivers. However, you can change the path and directory name at the time of extracting the file.
Click Next after the file extraction is complete and follow the instructions presented by the EZInstall program. Do NOT attach the USB cable to the printer until prompted by the EZInstall program.
Company
Hewlett Packard
Categories
Printers
Model
Hewlett Packard HP LaserJet 1020
Description
Basic Print Driver
Operating Systems
Windows XP 64 bits-Vista 64 bits
Language Driver
English
Version Driver
20070518
Size Driver
5.5Mb
File Name
lj1020-hb-pd-winv64-en.exe
Info
Use this download package if
You are upgrading the printer driver from a previous install
You want to add the printer driver to the communications port that already exists (driver was deleted but port still exists).
You have connected the printer to the computer and a communication port has been created.
The driver contained in this download package is the host-based printer driver for Microsoft Vista 64 bit.
Original Software/Drivers
Operating system(s): Microsoft Windows Vista (64-bit), Microsoft Windows XP x64
Download file size: 5.54M
System Requirements
No additional prerequisites
Installation Instructions
Before proceeding with the software installation, the printer must first be properly set up and connected to the computer. The Add Printer Wizard must be used to install the driver in this package.
Close any software programs running on your computer.
Click the Download button on this page and a File Download box will appear.
Select Save and a Save As box will appear.
Select a directory to save the file in and click Save. Remember the location of the saved file.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The default directory is C:\Program Files\Hewlett-Packard\LaserJet 1020 Drivers. However, you can change the path and directory name at the time of extracting the file.
To install a new driver when a communication port is already created
Click Next after the file is extracted.
To update an existing driver
Right mouse click the HP LaserJet 1020 driver entry in the Printers folder and then choose Properties.
Click on the Advanced tab and then choose the New Driver button, the Add Printer Driver Wizard appears. Click Next.
Select HP from the list of manufactures.
Select HP LaserJet 1020 There may be multiple entries for the driver that matches your printer model, choose the one with the most recent date. Click Next to continue.
Follow the remaining instructions in the Add Printer Wizard to complete the driver installation.
The driver will update after you click OK to close the Properties dialog.
After the installation is complete you can delete the file "lj1020-HB-pd-winv64-xx.exe" if desired.
You are upgrading the printer driver from a previous install
You want to add the printer driver to the communications port that already exists (driver was deleted but port still exists).
You have connected the printer to the computer and a communication port has been created.
The driver contained in this download package is the host-based printer driver for Microsoft Vista 64 bit.
Original Software/Drivers
Operating system(s): Microsoft Windows Vista (64-bit), Microsoft Windows XP x64
Download file size: 5.54M
System Requirements
No additional prerequisites
Installation Instructions
Before proceeding with the software installation, the printer must first be properly set up and connected to the computer. The Add Printer Wizard must be used to install the driver in this package.
Close any software programs running on your computer.
Click the Download button on this page and a File Download box will appear.
Select Save and a Save As box will appear.
Select a directory to save the file in and click Save. Remember the location of the saved file.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The default directory is C:\Program Files\Hewlett-Packard\LaserJet 1020 Drivers. However, you can change the path and directory name at the time of extracting the file.
To install a new driver when a communication port is already created
Click Next after the file is extracted.
To update an existing driver
Right mouse click the HP LaserJet 1020 driver entry in the Printers folder and then choose Properties.
Click on the Advanced tab and then choose the New Driver button, the Add Printer Driver Wizard appears. Click Next.
Select HP from the list of manufactures.
Select HP LaserJet 1020 There may be multiple entries for the driver that matches your printer model, choose the one with the most recent date. Click Next to continue.
Follow the remaining instructions in the Add Printer Wizard to complete the driver installation.
The driver will update after you click OK to close the Properties dialog.
After the installation is complete you can delete the file "lj1020-HB-pd-winv64-xx.exe" if desired.
