Fujifilm Pictrography 4000ii Download Drivers

Available 7 files for Pictrography 4000ii
Company
Fujifilm
Categories
Printers
Model
Fujifilm Pictrography 4000ii
Description
Drivers
Operating Systems
Macintosh OS 8.5.1 - 9.2
Size Driver
2.9Mb
File Name
drv4000ii4500.sit.hqx
Company
Fujifilm
Categories
Printers
Model
Fujifilm Pictrography 4000ii
Description
Drivers
Operating Systems
Macintosh OS X 10.2.1 up to 10.3.3
Size Driver
7.8Mb
File Name
pg4k2_45drvosxpanther.sit.hqx
Company
Fujifilm
Categories
Printers
Model
Fujifilm Pictrography 4000ii
Description
Drivers
Operating Systems
Macintosh OS X 10.3.x (Panther)
Size Driver
100Kb
File Name
plugin4k2panther.sit.hqx
Company
Fujifilm
Categories
Printers
Model
Fujifilm Pictrography 4000ii
Description
Drivers
Operating Systems
Macintosh OS X upto 10.2.8
Size Driver
7.8Mb
File Name
osxdrv4000ii4500.sit.hqx
Company
Fujifilm
Categories
Printers
Model
Fujifilm Pictrography 4000ii
Description
Drivers
Operating Systems
Windows 2000-XP
Size Driver
2Mb
File Name
pg4k452kxp.exe
Info
This document includes information not found in PICTOGRAPHY4000II/4500
Printer Driver Instruction Manual and information on printing problems.
Please read this document again before contacting us.
-------------------------------
Precautions on Installation
-------------------------------
In Windows95/98, if you reinstall the printer driver after deleting, an
error message may appear when printing saying ["Bilateral communication
function" not enabled.], preventing you from printing. In this case, go
to the [Details] screen of [PICTROGRAPHY Properties] and check
[Enable bi-directional support for this printer] in the [Spool Settings]
which is displayed by clicking on the [Spool Settings...] button and then
print.
Also, in some rare cases, [Enable bi-directional support for this printer]
cannot be checked (unable to select) in the situation mentioned above.
In this case, reinstall the printer driver according to the following
procedures:
1. Open the [Details] screen of [PICTROGRAPHY Properties] and change
[Print to the following port:] to a port other than [PICTRO TCPx:
FUJIFILM PICTRO TCP Port]
2. Click on the [Delete Port*] button and delete [PICTRO TCPx: FUJIFILM
PICTRO TCP Port].
3. Delete [PICTROGRAPHY](Printer driver)from the [Printers] folder.
4. Restart the computer.
5. Reinstall the PICTROGRAPHY Printer driver.
For the printer driver installation procedure, please refer to the
instruction manual attached.
6. Restart the computer.
-----------------------------------------
Notes on Upgrading the Printer Driver
-----------------------------------------
Follow the steps below to upgrade the printer driver.
1. Uninstall the current printer driver.
2. Restart the computer.
3. Install the new printer driver.
4. Restart the computer.
For details in installing and uninstalling the printer driver software,
please refer to the supplied instruction manual.

Follow the steps below to upgrade the printer driver when it is installed
only on the network printer on a Windows NT 4.0/2000/XP-based network.
1. Set the [PICTROGRAPHY 4000II/4500 Printer Driver] CD-ROM into the
computer.
2. Double click "UPDATE.EXE" in the folder on the CD-ROM containing the
printer driver for Windows NT 4.0/2000/XP.
3. After the [PICTROGRAPHY Printer Driver Update] screen appears, click
the [OK] button to start the upgrade. When the upgrade has completed,
a screen appears indicating that the upgrade has completed.
4. Restart the computer.
If you do not restart the computer, the upgrade will not go into
effect.
"UPDATE.EXE" is a utility program for updating the PCITROGRAPHY 4000II/4500
printer driver file. If the printer driver has not been installed, the
upgrade will not be conducted.

When upgrading the printer driver, make sure all printing has been
completed before starting the upgrade procedure.
-------------------------------
Limitations and Precautions
-------------------------------



Windows NT 4.0/2000/XP
If the cover of the PICTOGRAPHY unit is opened while data is transferred
to the PICTOGRAPHY, the unit prints a defective image instead of detecting
an error.
So do not open the cover of the PICTOGRAPHY unit during data transfer.
Company
Fujifilm
Categories
Printers
Model
Fujifilm Pictrography 4000ii
Description
Drivers
Operating Systems
Windows 95-98-98Se-Me
Size Driver
2Mb
File Name
pg4k459598.exe
Info
This document includes information not found in PICTOGRAPHY4000II/4500
Printer Driver Instruction Manual and information on printing problems.
Please read this document again before contacting us.
-------------------------------
Precautions on Installation
-------------------------------
In Windows95/98, if you reinstall the printer driver after deleting, an
error message may appear when printing saying ["Bilateral communication
function" not enabled.], preventing you from printing. In this case, go
to the [Details] screen of [PICTROGRAPHY Properties] and check
[Enable bi-directional support for this printer] in the [Spool Settings]
which is displayed by clicking on the [Spool Settings...] button and then
print.
Also, in some rare cases, [Enable bi-directional support for this printer]
cannot be checked (unable to select) in the situation mentioned above.
In this case, reinstall the printer driver according to the following
procedures:
1. Open the [Details] screen of [PICTROGRAPHY Properties] and change
[Print to the following port:] to a port other than [PICTRO TCPx:
FUJIFILM PICTRO TCP Port]
2. Click on the [Delete Port*] button and delete [PICTRO TCPx: FUJIFILM
PICTRO TCP Port].
3. Delete [PICTROGRAPHY](Printer driver)from the [Printers] folder.
4. Restart the computer.
5. Reinstall the PICTROGRAPHY Printer driver.
For the printer driver installation procedure, please refer to the
instruction manual attached.
6. Restart the computer.
-----------------------------------------
Notes on Upgrading the Printer Driver
-----------------------------------------
Follow the steps below to upgrade the printer driver.
1. Uninstall the current printer driver.
2. Restart the computer.
3. Install the new printer driver.
4. Restart the computer.
For details in installing and uninstalling the printer driver software,
please refer to the supplied instruction manual.

Follow the steps below to upgrade the printer driver when it is installed
only on the network printer on a Windows NT 4.0/2000/XP-based network.
1. Set the [PICTROGRAPHY 4000II/4500 Printer Driver] CD-ROM into the
computer.
2. Double click "UPDATE.EXE" in the folder on the CD-ROM containing the
printer driver for Windows NT 4.0/2000/XP.
3. After the [PICTROGRAPHY Printer Driver Update] screen appears, click
the [OK] button to start the upgrade. When the upgrade has completed,
a screen appears indicating that the upgrade has completed.
4. Restart the computer.
If you do not restart the computer, the upgrade will not go into
effect.
"UPDATE.EXE" is a utility program for updating the PCITROGRAPHY 4000II/4500
printer driver file. If the printer driver has not been installed, the
upgrade will not be conducted.

When upgrading the printer driver, make sure all printing has been
completed before starting the upgrade procedure.
-------------------------------
Limitations and Precautions
-------------------------------



Windows NT 4.0/2000/XP
If the cover of the PICTOGRAPHY unit is opened while data is transferred
to the PICTOGRAPHY, the unit prints a defective image instead of detecting
an error.
So do not open the cover of the PICTOGRAPHY unit during data transfer.
Company
Fujifilm
Categories
Printers
Model
Fujifilm Pictrography 4000ii
Description
Drivers
Operating Systems
Windows NT4
Size Driver
230Kb
File Name
pg4k45nt.exe
Info
This document includes information not found in PICTOGRAPHY4000II/4500
Printer Driver Instruction Manual and information on printing problems.
Please read this document again before contacting us.
-------------------------------
Precautions on Installation
-------------------------------
In Windows95/98, if you reinstall the printer driver after deleting, an
error message may appear when printing saying ["Bilateral communication
function" not enabled.], preventing you from printing. In this case, go
to the [Details] screen of [PICTROGRAPHY Properties] and check
[Enable bi-directional support for this printer] in the [Spool Settings]
which is displayed by clicking on the [Spool Settings...] button and then
print.
Also, in some rare cases, [Enable bi-directional support for this printer]
cannot be checked (unable to select) in the situation mentioned above.
In this case, reinstall the printer driver according to the following
procedures:
1. Open the [Details] screen of [PICTROGRAPHY Properties] and change
[Print to the following port:] to a port other than [PICTRO TCPx:
FUJIFILM PICTRO TCP Port]
2. Click on the [Delete Port*] button and delete [PICTRO TCPx: FUJIFILM
PICTRO TCP Port].
3. Delete [PICTROGRAPHY](Printer driver)from the [Printers] folder.
4. Restart the computer.
5. Reinstall the PICTROGRAPHY Printer driver.
For the printer driver installation procedure, please refer to the
instruction manual attached.
6. Restart the computer.
-----------------------------------------
Notes on Upgrading the Printer Driver
-----------------------------------------
Follow the steps below to upgrade the printer driver.
1. Uninstall the current printer driver.
2. Restart the computer.
3. Install the new printer driver.
4. Restart the computer.
For details in installing and uninstalling the printer driver software,
please refer to the supplied instruction manual.

Follow the steps below to upgrade the printer driver when it is installed
only on the network printer on a Windows NT 4.0/2000/XP-based network.
1. Set the [PICTROGRAPHY 4000II/4500 Printer Driver] CD-ROM into the
computer.
2. Double click "UPDATE.EXE" in the folder on the CD-ROM containing the
printer driver for Windows NT 4.0/2000/XP.
3. After the [PICTROGRAPHY Printer Driver Update] screen appears, click
the [OK] button to start the upgrade. When the upgrade has completed,
a screen appears indicating that the upgrade has completed.
4. Restart the computer.
If you do not restart the computer, the upgrade will not go into
effect.
"UPDATE.EXE" is a utility program for updating the PCITROGRAPHY 4000II/4500
printer driver file. If the printer driver has not been installed, the
upgrade will not be conducted.

When upgrading the printer driver, make sure all printing has been
completed before starting the upgrade procedure.
-------------------------------
Limitations and Precautions
-------------------------------



Windows NT 4.0/2000/XP
If the cover of the PICTOGRAPHY unit is opened while data is transferred
to the PICTOGRAPHY, the unit prints a defective image instead of detecting
an error.
So do not open the cover of the PICTOGRAPHY unit during data transfer.
HelpDrivers Since March 2000