Fujifilm NX-5D Download Drivers

Available 2 files for NX-5D
Company
Fujifilm
Categories
Printers
Model
Fujifilm NX-5D
Description
Modem-Print Port Printer Driver
Operating Systems
Macintosh OS 8.5 - 9.2
Size Driver
217Kb
File Name
nx5d_driver.sit.hqx
Company
Fujifilm
Categories
Printers
Model
Fujifilm NX-5D
Description
ParAllel Printer Driver
Operating Systems
Windows 95-98-98Se-Me
Size Driver
300Kb
File Name
nx5dprndrv.exe
Info
Printer: FUJIFILM DIGITAL/VIDEO PRINTER NX-5/5D
Printer Driver: Version 1.1.0

<>
Connecting or disconnecting devices while the printer or personal computer are switched on can damage your equipment. Always switch your
printer and computer off beforehand.
The operation of this printer driver cannot be guaranteed in
environments other than those described below.

[Compatible Devices] IBM PC-AT or compatible machines.
[Compatible CPUs] Intel 486DX2, 66MHz or better
[RAM] Minimum 16MB (24MB recommended)
[Virtual Memory] Set automatically
[Available Hard Disk Space] Minimum 50MB

* This printer driver does not run on Windows 3.1.
[ Installation ]

[Installation Using the General Installer Program]
(1) Load the CD-ROM supplied with the NX-5/5D printer into the
CD-ROM drive in your PC. The installation screen automatically
appears.
If the installation screen does not automatically appear, use the
manual installation procedure described below to install the
printer driver.
(2) Select "Install printer driver".
(3) Proceed with the installation from step (3) in the manual
installation procedure described below.

[ Manual Installation ]
(1) Click on the [Start] button and select "Settings" and then
"Printers" from the pull-down menu.
(2) Double-click on the "Add Printer" icon to start up the Printer
Wizard.
(3) Once the Printer Wizard has started up, click on [Next>]. Then
click on "Local Printer" and click [Next>].
(4) In the next screen, click on the [Use disk] button. Then click on
"Drive:" and select the drive containing the loaded CD-ROM. Select
"TXPRDRV\W95" from the "Document Name" list and click on the [OK]
button.
(5) Check that "FUJIFILM NX-5/5D" is listed in the Printer Wizard
"Printers" column, and then click on [Next>].
(6) Specify the printer settings as instructed by the Printer Wizard
and press the [Exit] button when you have finished. Copying of the
necessary files then begins.
(7) When all the files have been copied, the "FUJIFILM NX-5/5D" icon
appears in the "Printers" window.
(8) Remove the CD-ROM. This completes the installation of the printer
driver.

* You must register the printer driver in Windows before you can use
the printer.

[ Notes on Using the NX-5/5D ]
1) If you cannot print...
* Check that the printer is switched on.
* Check that the "Paper Out/Paper Jam" lamp is not lit.
If the "Paper Out/Paper Jam" lamp is lit, refer to the Owner's
Manual for the printer and load the paper correctly.
If the printer is out of paper, printing will automatically restart
when paper is loaded into the printer.
* Check whether any print jobs are left in the print spooler.
If the printer is operating normally and a print job is left in the
print spooler, delete the leftover print job. Printing of the next
set of spooled print data then begins.
* Check the parallel port mode setting in the BIOS for your PC. If
parallel port mode is not set to bi-directional, set the mode to
bi-directional.
This should resolve the problem.
For more information on the parallel port mode settings, refer to
the user manual supplied with your PC.
HelpDrivers Since March 2000