Epson Stylus C80WN Inkjet Download Manual

EPSON Stylus C80
1/02 EPSON Stylus C80 - 1
Printer Parts Accessories
Ink Cartridges
User Replaceable Parts
Media
Paper support
Printer cover
Output tray
Left edge guide
Ink cartridge holder
(not removable)
Output tray extensions
Right edge guide
Paper thickness lever
Control panel
Cartridge Part number
Black T032120
Cyan T032220
Magenta T032320
Yellow T032420
Part name Reference number Part number
Paper support 114 1070427
EPSON paper name Size
Part number
Premium Bright White Paper Letter S041586
Photo Quality Ink Jet Paper Letter
A4
Legal
S041062
S041061
S041067
Photo Quality Ink Jet Cards A6 S041054
Ink Jet Transparencies Letter
A4
S041064
S041063
Matte Paper - Heavyweight Letter
A4
S041257
S041258
Archival Matte Paper Letter
A4
S041341
S041342
Double-Sided Matte Paper Letter S041568
Premium Glossy Photo Paper Letter S041286
Premium Semigloss Photo Paper Letter
A4
S041334
S041332
Photo Quality Self Adhesive Sheets A4 S041106EPSON Stylus C80
2 - EPSON Stylus C80 1/02
Printer Specifications
Printing
Printing method On-demand ink jet
Nozzle configuration
Black 180 nozzles
Color 180 nozzles (60 each: cyan, magenta,yellow)
Resolution Maximum 2880 dpi ◊ 720 dpi
Print direction Bidirectional with logic seeking
Input buffer 256KB
Print speed 20 ppm (pages per minute)
Mechanical
Paper feed method Friction
Paper path Sheet feeder, top entry
Sheet feeder capacity 150 sheets of 17 lb (65.8 g/m
2
) paper
Dimensions
Storage Width: 17.8 inches (452 mm)
Depth: 12.6 inches (320 mm)
Height: 7.9 inches (201 mm)
Printing Width: 17.8 inches (452 mm)
Depth: 25.6 inches (650 mm)
Height: 11.6 inches (295 mm)
Weight 12.79 lb (5.8 kg) without the inkcartridges
Electrical
* Check the label on the back of the printer for your printerís voltage.
Environmental
Temperature
Operation 50 to 95 įF (10 to 35 įC)
Storage* -4 to 104 įF (-20 to 40 įC)
1 month at 104 įF (40 įC)
Transit* Ė4 to 140 įF (Ė20 to 60 įC)
120 hours at 140 įF (60 įC)
Humidity (without condensation)
Operation 20 to 80% RH
Storage
*
5 to 85% RH
*Stored in shipping container
Safety Approvals
Safety standards UL 1950, CSA C22.2 No. 950
EMC FCC part 15 subpart B class B
CSA C108.8 Class B
Ink Cartridges
* The figure given is based on continuous printing after ink replacement. The actual print capacity may vary. The ink charging process reduces the print capacity of the initial cartridge, even though it contains the standard amount of ink.
** Ink thaws and is usable after approximately 3 hours at
77 įF (25 įC).
To ensure good results, use genuine EPSON cartridges and do not refill them. Other products may cause damage to the printer not covered by EPSONís warranties.
Donít use an ink cartridge if the date on the package has expired.
Specification 120 V Model 220-240 V Model
Input voltage range*
99 to 132 V 198 to 264 V
Rated frequency range
50 to 60 Hz
Input frequency range
49.5 to 60.5 Hz
Rated current 0.6 A (Max. 1.2 A) 0.3 A (Max. 0.6 A)
Power consumption
Approx. 17 W (ISO 10561 Letter Pattern)
Approx. 5 W in standby mode
Specification
Black ink cartridge
(T0321)
Color ink cartridges
(T0322, T0323, T0324)
Color(s) Black Cyan, Magenta, Yellow
Print capacity* 1240 pages (A4, ISO/IEC
10561 Letter pattern at
360 dpi, 3.5% duty);
870 pages (A4 at 360 dpi,
5%duty)
420 pages (A4, 360 dpi,
5% duty each color)
Cartridge life 2 years from production date (if unopened)within 6 months after opening package, at 77 įF
(25 įC)
Storage temperature
-4 to 104 įF (-20 to 40 įC)
1 month at 104 įF (40 įC)
Transit temperature
-22 to 140 įF (-30 to 60 įC)
1 month at 104 įF (40 įC)
120 hours at 140 įF (60 įC)
Freezing temperature**
3.2 įF (-16 įC) -0.4 įF (-18 įC)
Dimensions 0.87 ◊ 2.8 ◊ 2.62 inches
(W ◊ D ◊ H)
22 ◊ 71.2 ◊ 66.5 mm
(W ◊ D ◊ H)
0.5 ◊ 2.8 ◊ 2.62 inches
(W ◊ D ◊ H)
12.7 ◊ 71.2 ◊ 66.5 mm
(W ◊ D ◊ H)EPSON Stylus C80
1/02 EPSON Stylus C80 - 3
Paper
Always load paper into the sheet feeder short edge first.
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, EPSON cannot attest to the quality of any non-EPSON brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs.
Poor quality paper may reduce print quality and cause paper jams and other problems. If you encounter problems, switch to a higher grade of paper.
Do not load curled or folded paper.
Use papers under these conditions:Temperature: 59 to 77 įF (15 to 25 įC)
Humidity: 40 to 60% RH
Printable area
A: The minimum top margin is 0.12 inch (3.0 mm).
B-L: The minimum left margin is 0.12 inch (3.0 mm).
B-R: The minimum right margin is 0.12 inch (3.0 mm)
C: The minimum bottom margin is 0.55 inch (14.0 mm) for single sheets (including panoramic size) and ink jet cards, and 0.78 inch
(20 mm) for envelopes.
* You can extend the minimum bottom margin to 0.12 inch (3.0 mm) by selecting Maximum as the Printable Area setting. However, print quality may decline in the expanded area.
Paper type Size Paper types Thickness Weight
Single sheets Letter (8.5 ◊ 11 inches)
Legal (8.5 ◊ 14 inches)
Half letter (statement, 5.5 ◊ 8.5 inches)
Executive (7.5 ◊ 10 inches)
A4 (210 ◊ 297 mm)
A5 (148 ◊ 210 mm)
A6 (105 ◊ 148 mm)
Plain bond paper and special ink jet papers distributed by EPSON
0.003 to 0.004 inch (0.08 to
0.11 mm) for plain bond paper
17 to 24 lb
(64 to 90 g/m
2
) for plain bond paper
Transparencies Letter (8.5 ◊ 11 inches)
A4 (210 ◊ 297 mm)
Transparencies distributed by
EPSON
óó
Heavyweight Matte Paper
Double-Sided Matte Paper
Archival Matte Paper
Letter (8.5 ◊ 11 inches)
A4 (210 ◊ 297 mm)
Heavyweight, Double-Sided, and
Archival Matte paper distributed by
EPSON
óó
Self-adhesive sheets A4 (210 ◊ 297 mm) Self adhesive sheets distributed by
EPSON
óó
Envelopes No. 10, 4.1 ◊ 9.5 inches (104 ◊ 241 mm)
DL, 4.3 ◊ 8.7 inches (110 ◊ 220 mm)
C6, 4.4 ◊ 6.4 inches (114 ◊ 162 mm)
Plain bond paper or air mail paper 0.006 to 0.02 inch
(0.16 to 0.52 mm)
12 to 20 lb
(45 to 75 g/m
2
)
Ink jet cards A6 (105 ◊ 148 mm) Ink jet cards distributed by EPSONóó
Premium Glossy Photo
Paper and
Semigloss Photo Paper
Letter (8.5 ◊ 11 inches)
A4 (210 ◊ 297 mm)
Premium Glossy Photo Paper or
Premium Semigloss Photo Paper distributed by EPSON
óó
A
B-L B-R
C
A
B-L B-R
Csingle sheets/index cardsenvelopesEPSON Stylus C80
4 - EPSON Stylus C80 1/02
Control Panel
To diagnose some problems, check the printerís control panel, as described below, or run a printer check (see page 8).
Follow the guidelines in this table when you check the control panel lights:Installing Ink Cartridges
The instructions in this section explain how to install the ink cartridges the first time the printer is set up and how to replace and empty or outdated cartridge.
Donít remove the cartridge label, or ink will leak.
Donít remove the green IC chip from the cartridge.
Installing a cartridge without an IC chip can damage the printer. Also, donít touch the green IC chip. This can damage the ink cartridge.
If you remove an ink cartridge temporarily, protect the ink supply port on the bottom of the cartridge from dirt and dust. Place it in a small box or its original packaging.
Store ink cartridges in the same environment as the printer. Stand the cartridges upright, as shown (the label identifying the color should be on top).

P is on or flashing
The

Ppower light is on when the printer is ready to print. It flashes when the printer is receiving a print job, charging ink, or cleaning the print head. It also flashes when the print head moves to the ink cartridge replacement position.
m is on The printer is out of paper. Load paper and then press the
m paper button to resume printing.
m is flashing and

H is on
Paper has jammed in the printer. Press the
m paper button to eject the jammed paper. If that doesnít clear the error, open the printer cover and remove any paper inside, including torn pieces. Then load a new stack of paper and press the
m paper button to resume printing.

H is flashing One of the ink cartridges is low on ink. Follow the instructions beginning on page 5 to replace the empty cartridge. If the

H ink out light goes on after youíve replaced a cartridge, you may have installed a cartridge your printer canít use. Check the number on the ink cartridge package to make sure youíve installed the correct cartridge.

H

is on One of the ink cartridges is out of ink. Follow the instructions beginning on page 5 to replace the empty cartridge. If the

H ink out light remains on after youíve replaced a cartridge, you may have installed a cartridge your printer canít use. Check the number on the cartridge package to make sure youíve installed the correct cartridge.
Paper button
Ink cartridge replacement button
Ink out light
Paper out light
Power light
Power button

P and
m are flashing
Jammed paper may be blocking movement of the print head, or you may have an internal error. Turn off the printer, open the cover, and check for any jammed paper. Also, make sure you removed all the packing material, as described on the Start Here sheet. Then turn the printer back on. If the error isnít cleared, contact your dealer or EPSON.

P,
m , and

H are flashing
An unknown printer error has occurred. Turn the printer off and contact your dealer or EPSON.

P

is off The printer is not receiving power. Try these solutions:? Make sure the printer is turned on.
? Turn off the printer, plug in the power cord securely, and turn the printer on again.
? Make sure the outlet is working and is not controlled by a switch or timer. If in doubt, try another outlet.
Donít touch this partEPSON Stylus C80
1/02 EPSON Stylus C80 - 5
Installing the Cartridges the First Time
1. Turn on the printer.
2. Lower the printerís output tray and open the cover.
3. Shake each ink cartridge four or five times. Then unwrap the cartridges.
Donít remove the cartridge labels, or ink may leak.
4. Wait a moment for the ink cartridge holders to move into loading position. Then lower each ink cartridge into its holder. The color of the cartridge label should match the sticker on the holder.
Install all four ink cartridges, and leave them installed for all types of printing, or the printer wonít work.
5. Gently push each cartridge down until it clicks into place.
6. Press the

H ink cartridge replacement button and close the printer cover.
7. Ink charging takes about 90 seconds. You will see the

P power light flash and hear the printer charging your ink.
Donít turn off the printer during this process or youíll waste ink.
Never turn off the printer when the

Ppower light is flashing unless the printer hasnít moved or made any noise for more than 5 minutes.
Replacing an Ink Cartridge
When the

H ink out light is flashing, one of your ink cartridges is low on ink. When the

H ink out light stays on, an ink cartridge is empty and you need to replace it.
You cannot print if any of the ink cartridges are empty.
Leave the empty cartridge installed in the printer until you have obtained a replacement; otherwise the ink remaining in the print head nozzles may dry out.
When an installed ink cartridge is more than six months old, you may also need to replace it if you notice that your printouts donít look as good as they used to. If print quality doesnít improve after cleaning and aligning the print head, you can replace the cartridge even if the

H ink out light isnít flashing. See page 7 for instructions.
Use these EPSON ink cartridges within six months of installing them and before the expiration date on the package:To ensure good results, use genuine EPSON ink cartridges and do not refill them. Other products may cause damage to your printer not covered by EPSONís warranty.
Black T032120
Cyan T032220
Magenta T032320
Yellow T032420EPSON Stylus C80
6 - EPSON Stylus C80 1/02
When you need new ink cartridges, contact your dealer or call the EPSON Store at (800) 873-7766. You can also visit the
EPSON Store at www.epsonstore.com (U.S. sales only). In
Canada, please call (800) 873-7766 for dealer referral.
Replacing an Empty Ink Cartridge
You can replace an ink cartridge when the

H ink out light is either flashing or on. Be sure you have a new ink cartridge before you begin. Once you start the ink cartridge replacement procedure, you must complete all the steps in one session.
Follow these steps to replace ink cartridges when the

H ink out light is flashing or on:1. Make sure the printer is turned on and not printing. The

P power light should be on, but not flashing.
2. Lower the output tray and open the printer cover.
3. Press the

H ink cartridge replacement button. The print head moves to the left, and the cartridge that needs to be replaced stops under the

_ mark. The

P power light also begins to flash.
Donít press the

H ink cartridge replacement button for more than three seconds, or the printer will start to clean the print head.
To avoid damaging the printer, never move the print head by hand.
4. Press the

H ink cartridge replacement button again.
? If more than one ink cartridge is empty, the next cartridge moves under the

_ mark. This happens after you press the

H ink cartridge replacement button for every ink cartridge that needs to be replaced.
? If all the empty cartridges have been identified, the print head moves to the ink cartridge replacement position.
5. Pinch the front and back tabs of the empty cartridge as you lift it out of the printer. Donít take the used cartridge apart or try to refill it.
If ink gets on your hands, wash them thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water.
6. Before you remove the new cartridge from its package, shake it four or five times.
SMEPSON Stylus C80
1/02 EPSON Stylus C80 - 7
7. Remove the cartridge from its package and lower it into the cartridge holder. Push down gently until the cartridge clicks into place.
8. Repeat steps 5 through 7 for each cartridge you need to replace.
9. Close the printer cover and press the

H ink cartridge replacement button. The printer moves the print head and begins charging the ink delivery system.
The

P power light flashes and the printer makes noise.
Charging takes about one minute. When itís finished, the

P power light stops flashing and stays on.
Never turn off the printer while the

Ppower light is flashing, unless the printer hasnít moved or made noise for more than 5 minutes.
Replacing an Outdated Ink Cartridge
Even if the

H ink out light isnít flashing or on, you may need to replace an ink cartridge if itís more than six months old and print quality declines. If print quality doesnít improve after cleaning and aligning the print heads, you can replace the cartridge(s) causing the problem.
Make sure you have the new ink cartridge(s) before you continue. Once you start the ink cartridge replacement procedure, you must complete all the steps in one session.
Follow these steps to replace ink cartridges before the

H ink out light goes on or begins to flash:1. Use the Nozzle Check utility (described in the Reference
Guide) to determine which cartridge(s) needs to be replaced.
2. Make sure the printer is turned on and not printing. The

P power light should be on, but not flashing.
3. Lower the output tray and open the printer cover.
4. Press the

H ink cartridge replacement button. The print head moves to the ink cartridge replacement position, and the

P power light begins to flash.
Donít press the

H ink cartridge replacement button for more than three seconds, or the printer will start to clean the print head.
To avoid damaging the printer, never move the print head by hand.
5. Pinch the front and back tabs of the cartridge as you lift it out of the printer. Donít take the used cartridge apart or try to refill it.
If ink gets on your hands, wash them thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water.
6. Before you remove the new cartridge from its package, shake it four or five times.EPSON Stylus C80
8 - EPSON Stylus C80 1/02
7. Remove the cartridge from its package and lower it into the cartridge holder. Push down gently until the new cartridge clicks into place.
8. Repeat steps 5 through 7 for each cartridge you want to replace.
9. Close the printer cover and press the

H ink cartridge replacement button. The printer moves the print head and begins charging the ink delivery system.
The

P power light flashes and the printer makes noise.
Charging takes about one minute. When itís finished, the

P power light stops flashing and stays on.
Never turn off the printer while the

Ppower light is flashing, unless the printer hasnít moved or made noise for more than 5 minutes.
Printing on Special Media
Select the Media Type setting according to these guidelines:Paper Loading Guidelines
Donít use the cleaning sheets that may be included with your special media; they may damage the printer.
? Always load paper short edge first, even when printing landscape-oriented pictures.
? Always handle sheets by the edges, and donít touch the printable surface.
? Be sure to load the printable (whiter) side of the paper face up in the sheet feeder.
? You can load paper up to the arrow inside the left edge guide.
? In addition to the Media Type setting, remember to select the correct Paper Size for your media in the printer software.
? If there are protective sheets between the sheets of paper or film, be sure to remove the protective sheets before printing.
? Some special media have a cut corner that you need to position on the upper right.
? You can load the following number of sheets of EPSON special media:If you have any problem loading multiple sheets of paper, try loading just one sheet at a time.
For this paper name...
Select this Media Type setting
Plain paper and envelopes Plain paper
EPSON Premium Bright White Paper Bright White Ink Jet Paper
EPSON Photo Quality Ink Jet Paper
EPSON Photo Quality Ink Jet Cards
EPSON Photo Quality Self Adhesive
Sheets
Photo Quality Ink Jet Paper
EPSON Premium Glossy Photo Paper Premium Glossy Photo Paper
EPSON Premium Semigloss Photo Paper Premium Semigloss Photo
Paper
EPSON Ink Jet Transparencies Ink Jet Transparencies
EPSON Matte Paper - Heavyweight Matte Paper - Heavyweight
EPSON Double-Sided Matte Paper Double-Sided Matte paper
EPSON Archival Matte Paper Archival Matte Paper
For this paper name...
Load this number of sheets
EPSON Premium Bright White Paper Up to 30 sheets
EPSON Photo Quality Ink Jet Paper Up to 30 sheets
EPSON Photo Quality Ink Jet Cards Up to 30 cards with the included support sheet beneath the stack
EPSON Matte Paper - Heavyweight
EPSON Archival Matte Paper
Up to 20 sheets with the included support sheet beneath the stack
EPSON Ink Jet Transparencies Up to 10 sheets
EPSON Photo Quality Self Adhesive Sheets
EPSON Premium Glossy Photo Paper
EPSON Premium Semigloss Photo Paper
EPSON Double-Sided Matte Paper
One sheet at a timeEPSON Stylus C80
1/02 EPSON Stylus C80 - 9
Testing the Printer
You can run a printer check to determine whether a problem comes from the printer itself or some other source.
1. Make sure both the printer and computer are turned off.
Then disconnect the interface cable from the printer.
2. Make sure letter-size or larger plain paper is loaded in the printer.
3. Hold down the
m paper button, then press and release the

Ppower button. Continue holding down the
m paper button until the

P power light starts to flash, then release it.
The printer prints one page showing its ROM version number, ink counter, and a nozzle check pattern. (If the pattern has white lines, you need to clean the print head; see below.)
4. Turn off the printer after it prints the check page. Then reconnect the cable and turn on your printer and computer.
If the check page prints, the problem probably lies in your software settings, interface cable, or computer. Your software may not be installed correctly.
If the check page doesnít print, you may have a problem with your printer. Try the suggestions in the Printer Basics book. If nothing works, contact your dealer or EPSON.
Cleaning the Print Head
If your printouts are unexpectedly light or faint, or dots or lines are missing from the image, you may need to clean the print head. This unclogs the nozzles so they can deliver ink properly. Print head cleaning uses ink, so clean it only if quality declines.
This section explains how to clean the print head using the
Head Cleaning utility. This is the recommended method when the printer is connected directly to your computer (not over a network).
You can also clean the print head using the printerís control panel. See the electronic Reference Guide for detailed instructions.
When you donít turn on your printer for a long time, the print quality can decline. Itís a good idea to turn on your printer at least once a month to maintain good print quality.
If your paper comes with a cleaning sheet, donít use it with your printer; it may jam inside the printer.
1. Make sure the printer is turned on but not printing.
The

P power light should be on, but not flashing. Neither of the other lights should be flashing or on.
You canít clean the print head if the

H ink out light is flashing or on. Replace the appropriate ink cartridge instead.
2. Load letter-size paper.
3. If you have an application running, access the printer settings dialog box.
Or, with Windows, click Start, point to Settings, then select Printers. Right-click your EPSON Stylus C80
Series printer icon in the Printers window. Then select
Properties (Document Defaults in Windows NT,
Printing Preferences in Windows 2000).
4. Windows: Click the Utility tab.
Macintosh: Click the Utility button.
5. On the Utility menu, click the Head Cleaning button.
6. Follow the instructions on the screen to clean the print head. Cleaning takes about 30 seconds, during which the printer makes some noise and the

Ppower light flashes.
Never turn off the printer while the

Ppower light is flashing, unless the printer hasnít moved or made noise for more than 5 minutes.
7. When the

Ppower light stops flashing, run a nozzle check to confirm that the print head nozzles are clean.
Make sure paper is loaded in the printer and click Print nozzle check pattern (Windows) or Confirmation
(Macintosh). Then click Next. The nozzle check pattern prints (see below for details).
8. If the nozzle check pattern has no gaps in its lines, click
Finish.
If the pattern has any gaps, click Clean to clean the print head again. If you donít see any improvement after cleaning three or four times, see the troubleshooting section in the online Reference Guide.EPSON Stylus C80
10 - EPSON Stylus C80 1/02
Examining the Nozzle Check Pattern
Examine the nozzle check pattern you print. It should look something like this:Each staggered horizontal and straight vertical line should be complete, with no gaps in the dot pattern. If your printout looks okay, youíre done.
If there are gaps in the lines, clean the print head again.
Aligning the Print Head
If your printouts contain misaligned vertical lines, you may need to align the print head. Your printer must be connected to a local port, not on a network, to use the Print Head
Alignment utility. Follow these steps:1. Make sure the printer is on but not printing, and letter-size plain paper is loaded.
2. If you have an application running, access the printer settings dialog box.
Or, with Windows, click Start, point to Settings, then select Printers. Right-click your EPSON Stylus C80
Series printer icon in the Printers window. Select
Properties (Document Defaults in Windows NT,
Printing Preferences in Windows 2000).
3. Windows: Click the Utility tab.
Macintosh: Click the Utility button.
4. You see the Utility menu. Click the Print Head Alignment button.
5. Follow the instructions on the screen to print a vertical alignment test page.
6. Select the best line from the first group of lines on the printout, then enter its number in box #1 on the screen.
Select the line with the cleanest, straightest edges.
7. Select the best line for each of the other groups of lines, and enter its number in the appropriate box.
8. Do one of the following:? If the middle line (number 8) in each group is the best, your print headís vertical alignment is correct. Click
Next to continue.
? If you select a number other than 8 for any of the groups, click Realignment and follow the instructions on the screen to print another vertical alignment test page. Repeat steps 6 through 8 until number 8 is the best line for each of the groups. Then click Next to continue.
9. Follow the instructions on the screen to print a horizontal alignment test page. You see seven pairs of gray rectangles on the printout.
10. Select the pattern with the least white or black banding where the rectangles meet and enter the number on the screen.
11. Do one of the following:? If pattern number 4 is the best choice, your print headís horizontal alignment is correct. Click Finish.
? If you enter any number but 4, click Realignment and follow the instructions to print another test page.
Repeat steps 10 and 11 until pattern number 4 is the best choice. Then click Finish.gaps in nozzle check pattern
Select the line in the first pattern with the cleanest, straightest edges...and enter its number in the corresponding box on screenEPSON Stylus C80 1/02 EPSON Stylus C80 - 11 Cleaning the Printer To keep your printer working at its best, you should clean it several times a year. Follow these steps: 1. Turn off the printer and wait for the Ppower light to go out. 2. Unplug the power cord and disconnect the printer cable. 3. Remove all the paper from the sheet feeder. 4. Clean the exterior of the printer with a soft, damp cloth. Keep the printer cover closed to prevent water from getting inside. 5. If ink leaks inside the printer, carefully wipe it off with a damp cloth. Donít touch the gears inside the printer. Make sure you use a soft cloth to clean the printerís lid; otherwise you may scratch it. Donít use a rough cloth, and never use a hard or abrasive brush to clean any part of the printer case. Never use alcohol or thinner for cleaning; they can damage the printer components and case. Donít get water on the printer components and donít spray lubricants or oils inside the printer. Donít use any cleaning sheets included with special paper; they may jam inside the printer. Transporting the Printer If you move your printer some distance, you need to prepare it for transportation in its original box or one of a similar size. To avoid damage, always leave the ink cartridges installed when transporting the printer. Be sure to remove the tape used in step 4 after installing the printer in its new location. 1. Turn on the printer, wait until the print head locks in the far right position, then turn off the printer. 2. Unplug the power cord from the electrical outlet and disconnect it from the printer 3. Disconnect the printer cable from the printer. 4. Remove any paper from the printer and remove the paper support. 5. Open the printer cover. Secure the ink cartridge holder to the printer with tape as shown, then close the printer cover. 6. Push in the output tray extensions and close the tray. 7. Repack the printer and attachments in the original box using the protective materials that came with them. See your Start Here sheet. Keep the printer level as you transport it. After transporting the printer, remove the tape securing the print head and test your printer. If you notice a decline in print quality, clean the print head (see page 9); if output is misaligned, align the print head (see page 10). Related Documentation TM-SC80 EPSON Stylus C80 Service Manual PL-SC80 EPSON Stylus C80 Parts Price List CPD-12669 EPSON Stylus C80 Start Here CPD-12668 EPSON Stylus C80 Printer Basics CPD-12670 EPSON Stylus C80 CD-ROM with Reference Guide If ink leaks inside, wipe here with a damp, lint- free cloth Tape the ink cartridge holder to the printer case

TXT / PDF

Available 28 files for Stylus C80WN Inkjet View all >
HelpDrivers Since March 2000